Still watching while in a meeting lol. 58:32, I like your idea of going parallel with the pads as going perpendicular, I have ripped off many of pads in the past. I'm assuming because I've pressed down too hard and also possibly from using the incorrect tip :/
Hi, i have a quastion about Amiga cd32. Something went bad with sound channels when my friend hooked it up with this module terrible fire. I think that there is something with stereo mixer becouse it outputing sound to the tv but there is only mono on both speakers, but when o pluged headphones there is only left channel. Do you have any tips for that ? Thank you in advance for your answer.
@@GadgetUK164 Hi, yes it is fully recaped. I think the preamp U38b (LM253) is done. This is two channel audio amp and when i measure first output it seems to be left channel audio but when i measured second there is no audio.
Boa tarde tô com problema com uma placa neo geo mvs que não está saindo troquei os capacitores já troquei sei de áudio mas continua sem se você botar o dedo atrás da chavinha de volume sai ruído do som como posso resolver o problema do som
@gadget164uk hello, I have a MVS Mark of Garou board in need of repair...chip seems to be burnt out its a neo geo cmc 90g06cf7042 chip..any chance you could assist with repair..willing to pay for the repair of course
Hi, I cannot offer customer repairs sorry =/ The CMC would need to come from a donor cart (AES or MVS) which uses that same CMC - probably the same game. It is used for decryption and I believe that other games using similar chip have different keys.
32:30 Thanks for the chuckle!
@1:09:31 LMFAO. The revenge of the intermittent fault! Great video as always. Always like the longer vids but must have driven you nuts lol.
LOL - it seriously pee'd me off this board lol! Every time I thought it was 100%, it wasn't...
I always enjoy these in my off time. Cheers!
Furrtek Tindie Store - www.tindie.com/stores/furrtek/
Terrible Fire - ruclips.net/user/TerribleFire
Thanks Chris. 19:21 is exactly my soldering weapon of choice
Great repair video!!! I really enjoy your neo geo repair videos
Thanks! 👍
32:30, LOLOLOLOLOL, get the pokey pokies to pop them off :D
Still watching while in a meeting lol. 58:32, I like your idea of going parallel with the pads as going perpendicular, I have ripped off many of pads in the past. I'm assuming because I've pressed down too hard and also possibly from using the incorrect tip :/
Brilliant video. One of your best. Thank you.
Your looking for the video called "Amiga 500 plus creating a 2 inch trace" and 8:21 in timeline!
Great repair video
Thanks 👍
Thank you for more Neo Geo content. I was getting a bit tired of the Amiga repairs.....
More to come! =D
Nice repair! Everytime I had to remove this black foam, I used hot air to soften the glue. you can then rub the foam and remove larger chunks.
Yep!
Grosse réparation! Beaucoup de patience… persévérance… et au final le slot a l’air fonctionnel!? Merci du partage l’ami ✌️🕹
@1:18:42 What's that game called please? I don't think that you mentioned its name. If there's a Dreamcast version then I'd like to check it out!
It's a game called "Fast Striker"
@@Neodra Thanks!
Couple of things that can work when IPA doesn't is WD40 or lighter fluid. Lighter fluid is ace for sticky residue.
Yes. Brake cleaner spray might also work. It's good for removing stickers from printed glossy cardboard.
Hi, i have a quastion about Amiga cd32. Something went bad with sound channels when my friend hooked it up with this module terrible fire. I think that there is something with stereo mixer becouse it outputing sound to the tv but there is only mono on both speakers, but when o pluged headphones there is only left channel. Do you have any tips for that ? Thank you in advance for your answer.
Has it been re-capped? The capacitors are the most likely cause on the CD32.
@@GadgetUK164 Hi, yes it is fully recaped. I think the preamp U38b (LM253) is done. This is two channel audio amp and when i measure first output it seems to be left channel audio but when i measured second there is no audio.
Terrible VIA as a new brand or product name? 😉🤷🏽♂️
Boa tarde tô com problema com uma placa neo geo mvs que não está saindo troquei os capacitores já troquei sei de áudio mas continua sem se você botar o dedo atrás da chavinha de volume sai ruído do som como posso resolver o problema do som
Test with SMK Dan diagnostic BIOS!
I'm falling behind on watching your repair vids. Great content, as always. Hope you were able to upgrade your drivers.
Thanks John! Yes, I have a video coming up in a bit - just massive changes going on atm (moving into an area with tables etc).
Try using WD-40 rather then IPA when you get a sponge that’s stuck on like that, let it sit for a bit and a plastic scraper should just peal it away
@gadget164uk hello, I have a MVS Mark of Garou board in need of repair...chip seems to be burnt out its a neo geo cmc 90g06cf7042 chip..any chance you could assist with repair..willing to pay for the repair of course
Hi, I cannot offer customer repairs sorry =/ The CMC would need to come from a donor cart (AES or MVS) which uses that same CMC - probably the same game. It is used for decryption and I believe that other games using similar chip have different keys.
Thank you for a swift response! Love your channel.