Sadly most of the US youtuber guys are telling us what color nail polish goes with black and grey Yeezys or how to carry your man purse like a pro. Most of my fav youtubers are Canadian or English.
@@chadrichwine2527Canada doesn't need to become a state of the US. They just need solid leadership. They've been led astray for nearly a decade. Imagine Biden being in office for 10 years. Canada will get it's shit together. But only if Pierre gets in as PM, and they recognize all corruption and eliminate it. And get rid of that effing carbon tax ffs😂
Saw Brent's face on a usual DG thumbnail it took a second for it to click in my brain 😂😂 Brent's attitude of "just go at it and see how things turn out" and old school hotrodding knowledge is awesome!
Hey Rich, long time subscriber first time commenter. I’ve got a little experience with linear actuators from my offshore go-fast’s days, I’d definitely recommend using a quick-release “emergency” pin (with a spring loaded detent ball) on one side of each of those actuators. If one of the actuators gives up it renders the other one useless unless you can physically disconnect the failed one, and maybe more importantly if you need to get that hood up FAST for a fire or something the emergency pins make that possible. These quick release emergency actuator pins are commercially available and usually come with a bit of stainless braided cable attached to them that you can tuck away in a hidden but accessible spot. Great work as always!
I help a friend install an actuator on a race car trailer dropdown ramp, and it got me thinking about their uses, I am building a custom little truck and going to install remote actuator for doors and toolboxes,
BRENT IS A "JACK OF ALL TRADES" GUY, MASTER OF SOME. HE DOES EVERYTHING ALL BY HIS SELF. HE SURPRISED ME WHEN HE PULLED OUT A SEWING MACHINE. I LOVE THE WAY HE MAKES OLD PARTS (SPEEDOS OR HEATERS) WORK WITH NEW PARTS.
It was fun and really nice to see you working on builds again YES working on the Electric Modifications Project is a build. It's just a lot different than building a Car or Truck the mood and feeling is way different that's all. But it was nice watching and listening to You really enjoying yourself while working on the truck. Your mood is totally different on the Electric Modifications Project and you don't seem to have as much fun and laugh less. BUT it's understandable because it's something NEVER done before and you really have to concentrate because a mistake can COST a lot of money.
No, I enjoy all the builds equally. The difference is that this was done over the holidays, and throughout the year I have been busting my ass so much that my tiredness comes through. I had some time off to recoup for this collab
WOW!!! That's so amazing what you two did with the front fenders l have never seen anything done like that before. It turned out really nice awesome job guys with a little work amazing things can be done and look so amazing.
Great to watch you two working on this build ! But please protect your eyes at all times ! I caught you slacking off a few times ... Remember the eyeballs don't grow back and I ,like the majority of us would like to see these projects for years to come !! 😊 ❤💙💛
Always inspiring, and full of great ideas. I'm in the middle of a 65 F-100 that was just going to be an engine swap, now that I cut out the R/H floor pan I discovered a lot of hidden rust so now its a from down restoration.
Love these total Canada Collabs ya'll do! Love to see a mega Great White North collaboration episode with addition the fella from Cold War Motors and Carter Auto Restyling and many more!!
Rich you are a miracle worker! That looks brilliant, even with all the alterations it is just gorgeous. I love it. Well done as always you do the most intricate work without a tape measure, just by eye! Thanks for doing what you do best, keep us satisfied, which is better than happy! From UK.
I’ve always felt this C10 would make a great 1/10th model. One of those high detailed ones with all the operational doors and accurate interiors. I’m only here for the music.
Yeah... I'm not falling for that M12 battery joke again, you fooled me once! Once again, great work. It's nice to see those older projects getting worked on some more!
Mopar guy here but gladly watching the old generic motors 64 getting the love it deserves im not a brand snob i can appreciate cool no matter the brand i even like the fordepillar too bad its Ford but like i said very cool
Man that looks awesome and damn I wish I was either one yalls Neighbor because I love doing stuff like that thank you guys for making the videos that yall make
no apologizes necessary great stuff you finish what you start as $$$$and parts and time permits and leaving time to live a life , if some couch surfer don't understand this so be it
Whene? Ver, you decide to do detailing on it. I honestly think you should get ahold of your buddy. Vice grip garages shine juice and save on the patina. As he would say
Might want to check the regulations for Ontario as far as hoods and latches. You might have to set up a latch on the firewall to lock the hood closed to satisfy those government safety types.
Awesome video, was fun the hang out for the day!
I love how all my favorite canadian youtubers are coming together.
Canada? Soon to be the 54th state of the USA.
Sadly most of the US youtuber guys are telling us what color nail polish goes with black and grey Yeezys or how to carry your man purse like a pro. Most of my fav youtubers are Canadian or English.
@@chadrichwine2527Canada doesn't need to become a state of the US. They just need solid leadership. They've been led astray for nearly a decade. Imagine Biden being in office for 10 years. Canada will get it's shit together. But only if Pierre gets in as PM, and they recognize all corruption and eliminate it. And get rid of that effing carbon tax ffs😂
Saw Brent's face on a usual DG thumbnail it took a second for it to click in my brain 😂😂
Brent's attitude of "just go at it and see how things turn out" and old school hotrodding knowledge is awesome!
He's awesome to work with
Hey Rich, long time subscriber first time commenter. I’ve got a little experience with linear actuators from my offshore go-fast’s days, I’d definitely recommend using a quick-release “emergency” pin (with a spring loaded detent ball) on one side of each of those actuators. If one of the actuators gives up it renders the other one useless unless you can physically disconnect the failed one, and maybe more importantly if you need to get that hood up FAST for a fire or something the emergency pins make that possible. These quick release emergency actuator pins are commercially available and usually come with a bit of stainless braided cable attached to them that you can tuck away in a hidden but accessible spot. Great work as always!
I help a friend install an actuator on a race car trailer dropdown ramp, and it got me thinking about their uses, I am building a custom little truck and going to install remote actuator for doors and toolboxes,
That and the use of leverage... you can make that small stroke open further just from placement.
Love seeing Brent. His laughter is just so contagious, you can't help but be in a good mood watching him.
Big fan of Brents---the man is a fabricating machine and builds interesting vehicles !!
Man , im so happy to see jumping back on this build. This is the built that got me watching the channel. GREAT JOB great video!
Thanks for sticking around lol! Nothing is abandoned, just not enough hours in a day
One I was waiting for too 😀
Excellent collaboration with Brent..you guys are both greatly skilled in many rhelms. Your camera guy is killing it too.
Love the trucks..🇨🇦
Been following half ass for years, Brent is awesome
Great video but whoever turned the music up at the 23 min mark needs to turn it back down. I can hardly hear you over it
great to see Brent helping out, he is a fabulous fabricator 🙂
You couldn’t have picked a better guy to help you, Brent is awesome! What a great collab from 2 creative Canadians 👍
It's amazing how much Brent gets done. His projects are not small at all but he burns through them.
BRENT IS A "JACK OF ALL TRADES" GUY, MASTER OF SOME. HE DOES EVERYTHING ALL BY HIS SELF. HE SURPRISED ME WHEN HE PULLED OUT A SEWING MACHINE. I LOVE THE WAY HE MAKES OLD PARTS (SPEEDOS OR HEATERS) WORK WITH NEW PARTS.
The two of you half assed the heck out of that hood!
It was fun and really nice to see you working on builds again YES working on the Electric Modifications Project is a build. It's just a lot different than building a Car or Truck the mood and feeling is way different that's all. But it was nice watching and listening to You really enjoying yourself while working on the truck. Your mood is totally different on the Electric Modifications Project and you don't seem to have as much fun and laugh less. BUT it's understandable because it's something NEVER done before and you really have to concentrate because a mistake can COST a lot of money.
No, I enjoy all the builds equally. The difference is that this was done over the holidays, and throughout the year I have been busting my ass so much that my tiredness comes through. I had some time off to recoup for this collab
What a dream team! Brent and Rich in one shop equals a lot of innovation and fun.
I love that two of my favorite Canadian panel beaters got together and went full tilt!
WOW!!! That's so amazing what you two did with the front fenders l have never seen anything done like that before. It turned out really nice awesome job guys with a little work amazing things can be done and look so amazing.
BRENT!!! Good collab.
Great to watch you two working on this build ! But please protect your eyes at all times ! I caught you slacking off a few times ... Remember the eyeballs don't grow back and I ,like the majority of us would like to see these projects for years to come !! 😊 ❤💙💛
Glad to see the C10 back in the shop. I thought you were doing a builder visit, until I saw the [EP 20] I had honestly forgotten about this truck!
I love it when my two favorite channels collaborate!
Always inspiring, and full of great ideas. I'm in the middle of a 65 F-100 that was just going to be an engine swap, now that I cut out the R/H floor pan I discovered a lot of hidden rust so now its a from down restoration.
Two of the nicest, smartest and best builders on RUclips 👍
Rich, the music is too loud. I was trying to understand what you were planning but you were drowned out by the background music.
Awesome to see you back on this build.
That’s the one that brought me to your channel!
🏁HELL YES!! Now I know what we will do on our ‘56👍🏼 might add quick pins on the actuators in the event of NO POWER🏁
Absolutely! You can get at the pins through the wheel well
Love these total Canada Collabs ya'll do! Love to see a mega Great White North collaboration episode with addition the fella from Cold War Motors and Carter Auto Restyling and many more!!
Rich you are a miracle worker! That looks brilliant, even with all the alterations it is just gorgeous. I love it. Well done as always you do the most intricate work without a tape measure, just by eye! Thanks for doing what you do best, keep us satisfied, which is better than happy! From UK.
Love the humor, Rich has gotta be one of the more funny ones on YT w a wrench!
Thank you!
That was a clever idea with the hood, fricken awesome. Good to have you back in the shop!!!!!!
I got a pile done over the holidays. SIlverado Cab is back on the frame and the Bronco is moving under its own power
The classic" I've been wrenching on the floor" dirt-imprint on the shirt never goes out of style! xD
Been following Brent for years and your channel and this is awesome!! Great dudes work together :)
Ive been waiting to see and update on that truck!! Love that old truck, It’s looking so cool and that hood is sick love it keep up the good work 👊🏽
Brent is a master of metal!
I’ve always felt this C10 would make a great 1/10th model. One of those high detailed ones with all the operational doors and accurate interiors. I’m only here for the music.
Good way to spend a Saturday afternoon
Love watching you building/engineering on the fly. And making it work. Cant wait to see when its all finished!
Love seeing this project come back! Keep up the good work guys
Great to see Brent and hear his laughter. Hope he didn`t scratch the paint ! = ) Happy New Year y`all !
This would have made an amazing meet up! Too bad the weather isn't great for an impromptu car show.
Yeah... I'm not falling for that M12 battery joke again, you fooled me once! Once again, great work. It's nice to see those older projects getting worked on some more!
Brent is super cool. Channel is awsome!
Saw the Thumbnail & had to do a double take lol This is a collab I've been waiting for as Im a fan of both channels
Binky-inspired front flip hood. 🇬🇧
23:20 I'm loving the build. But the music over Rich speaking is bad editing!
It's cool, but faster actuators would make it much cooler...
Just hit the settings button and turn the video speed to 1.5. Some people come up with problems, I just come up with solutions!
Mopar guy here but gladly watching the old generic motors 64 getting the love it deserves im not a brand snob i can appreciate cool no matter the brand i even like the fordepillar too bad its Ford but like i said very cool
Man that looks awesome and damn I wish I was either one yalls Neighbor because I love doing stuff like that thank you guys for making the videos that yall make
Epic, my favorite project, with my two favorite RUclipsrs!!!
Oh hey it's time to replace the batteries in the seats!
Thanks for the reminder!
I was looking for this comment 😂 I was thinking he could swap the seat one with the hood one after they've been charged 😅
@gavster89 ooh good idea!
Brent would be the Ultimate Wingman in the shop. You guys would build some amazing sht working together.
Excellent work Rich and Brent looks good
my favorite channels united!
Cant wait to see it finished,sweet setup
looking bad ass man, great work
This is my favourite project of yours! Good job boys!
GREAT COLAB. LOOKS NICE.
A Halfass Kustoms and Deboss Garage mash up? This is awesome! I was wondering how far you guys were from each other. It turns out its pretty far. Lol
Turn the music either down or off so we can hear when he is talking. Other than that, great video, and good job on the hood.
I’m fine with no music at all, but especially not when people are talking 😂 I couldn’t even hear you on that one bit
Finally ! So happy your back on this beast
Wow, what a great colab!
As soon as I saw the notification⛹🏽♂️
no apologizes necessary great stuff you finish what you start as $$$$and parts and time permits and leaving time to live a life , if some couch surfer don't understand this so be it
About damn time! I'm like, where the heck is the C10? 🗣📢 Hey Rich!
Finish your projects...
Thanks buddy, working on it
very cool build.nice job
Brent is the best!
Improvised C-10 Wide Body 🏁
My favourite build behind the 3 kitty. Your ambition knows no limits. Bagged, twin turbo duramax swaped C10 wrecker? Who else is doing that?
I’m good with whatever. Carry on!!
a team up of my two favorite channels
I'll bet this hood project was a complete giggle-fest hahahahaaa You two get along really well. It was fun to watch.
I can not deny that we had a great time
@DEBOSSGARAGE that's a badass machine btw
Love this project 👍🏻
Almost as cool as a truck that transforms into a giant robot, wouldn't be surprised to see that on this channel at some point either.
Looking good and another great video 👍👍
Whene?
Ver, you decide to do detailing on it. I honestly think you should get ahold of your buddy. Vice grip garages shine juice and save on the patina. As he would say
Been so long... I have been waiting YEARS for this
Couldn't have, because the last video was under 2 years ago, so it would be year and a half lol
@@DEBOSSGARAGE Yah got me. haha shoot me xx
great Collab
i like his channel too
I honestly forgot half of these deboss projects existed
Might want to check the regulations for Ontario as far as hoods and latches. You might have to set up a latch on the firewall to lock the hood closed to satisfy those government safety types.
Just give Brent a handful of rust and it will get completed.
Just make a leaver & gear to get the distance need, ( and a cool mech,steam punk look) for your push Ram,
BRENT!!! "MINT"
Now you gotta get Vice Grip Garage to come and do the duct tape work.
COOL!
A Great video Easy Peasy Fabrication lol
23.25 wow musics so loud. Couldn't hear you Rich. Damn
Killer 👍
I just wish it had longer hub caps on it
It's about time😂😂😂😂😂😂😂
I would add a pin so you have a back up incase the actuator or battery dies
Why not use air actuators ? Yah already have the tank & airride.
Brent has a Burt from tremors vibe
You could have put piano hinges in the top of the hood and fender, and made it flip up.
You need a way to override the actuator system just in case of emergencies and you need the hood open quickly…
Ya know air cylinders to tilt it would've also been cool if you could control their speed
Now all you got left to do is put a 12-volt Milwaukee under the driver seat
"It's got a 4" stroke, but I need an eight...or ten." The jokes just tell themselves.
the music at about 23:30 is too loud