So awesome an interview. The best part about this company is it is headed by somebody that actually knows and understands what they are selling! That is so rare these days.
Honestly I thought I wouldn’t watch this video. How much interesting information could there be? Oh boy was I wrong. Definitely worth to watch ! Thank you both!
These series of videos are definitely informative each time i watch. A Excellent use of RUclips to pass on information that can benefit so many. Even if you don't agree with what you watch. It still gives you the opportunity to think more about how you approach a situation.
This was great. I love those in depth technical talks that I can still understand. It's always good to hear that my ideas are not that far from what the experts think :-) Yes - tool holders do make a big difference. When I wanted to try some engraving, I grabbed an engraving tool from my small CNC but since I did not have a 1/8" holder, I put the bit in a CNC drill chuck. Hours later I am still using that tool and still love the quality it produces. It surely is not the correct holder for such a tool but it seems to work well in my case.
Just for the record the iso standards and systems your talking about on this video we’re developed in conjunction with an English mathematician from a university in County Durham England and an Engineer from lubek Germany....with dual patents and copyrights applied for in both Europe Asia and the Americas,,,
Balancing large turning things like propellers weighing 2000 lbs or more need less perfection because they turn slower than a 10 inch aluminum propeller turning 150 time faster. Loved the video--much thanks.
well i can tell you that the most used holders in denmark that i seen ( a educated machinest from denmark ) is BT holders over here ( denmark is part of erup )
If they've been used for any reasonable amount of time, they probably already carry witness marks transferred from the spindle before it was ground, or fretting. You will immediately transfer witness marks from your tool holder taper to your "new" spindle. Your tool holder taper is a reflection of your spindle taper (and vice-verse)...and whatever imperfections exist on your taper, will soon be present in your freshly ground spindle.
Here is a blooper. Pull out. Happened to me with an er collet on inconel 718 doing keyways. Also speaking of humming, I have a air grinder at work that does 90k, rippems i put a tool on it that was way too big to be used on it and called for some 30-50k rippems.
@@nyccnc ohh okay. could be that you had also gotten a hermle for testing like the datron ( we had two hermle where i use to work. to be honest i like the haas controle better xD ) btw what F speed you the datron run at with max spindle speed for a finish pass ( also did you try putting a yg1-alu power in it ? just curios since im planing to get a 50k spindle in my own machine and like to know how dast the datron was going best regards Marc
It says a lot about a company who makes a guy like that President. The only downside is I didn’t get to take any shots for every time he said a corporate buzz word.
Great video. This explains why Haas probably started making cheap Chinese holders. Sell cheap holders to guys with SS machines then sell them new spindles every year ! !
So awesome an interview. The best part about this company is it is headed by somebody that actually knows and understands what they are selling! That is so rare these days.
Honestly I thought I wouldn’t watch this video. How much interesting information could there be?
Oh boy was I wrong.
Definitely worth to watch ! Thank you both!
That was neat! I love seeing in depth conversations like these.
Jack is the kind of speaker who makes you want to listen, learned a good deal.
thanks
These series of videos are definitely informative each time i watch.
A Excellent use of RUclips to pass on information that can benefit so many.
Even if you don't agree with what you watch.
It still gives you the opportunity to think more about how you approach a situation.
John, your videos have literally saved a life. Thank you!
Hey man I appreciate the leadership of showing you can not compromise on good content or advancing the world while being a couple more feet apart.
This was great. I love those in depth technical talks that I can still understand.
It's always good to hear that my ideas are not that far from what the experts think :-)
Yes - tool holders do make a big difference. When I wanted to try some engraving, I grabbed an engraving tool from my small CNC but since I did not have a 1/8" holder, I put the bit in a CNC drill chuck. Hours later I am still using that tool and still love the quality it produces. It surely is not the correct holder for such a tool but it seems to work well in my case.
Probably one of your best videos in quite a while.
Man, I love hearing from real experts.
I'm nearly 100% Big Kaiser in my shop. No regrets.
Pioneer and Haimer here.
Great to hear from Big Kaiser! I love their Thin-Bit line. Such a joy to work with!
Big Kaiser and Kaiser Thin Bit are two entirely different companies.
Very interesting video there. A follow up video would be awesome especially on the balancing issue. Thanks a lot to the both of you.
Big Kaiser is an outstanding product as long as you can justify and afford it ! Love it !
Great interview & great inputs from the guest. Cleared lot of minute technical issues related to tool holders.
Just spent a bunch of money on some BK tooling. It seems like they have such a different offering and it is so nice.
I remember him saying that 😜 Jack is such a great guy
Just for the record the iso standards and systems your talking about on this video we’re developed in conjunction with an English mathematician from a university in County Durham England and an Engineer from lubek Germany....with dual patents and copyrights applied for in both Europe Asia and the Americas,,,
Balancing large turning things like propellers weighing 2000 lbs or more need less perfection because they turn slower than a 10 inch aluminum propeller turning 150 time faster. Loved the video--much thanks.
Very interresting !
Such a great video. Thanks for organizing.
Balancing is really important for all high speed rotating mass. I work on gas turbine stuff, so I might be a bit biased, but it's still true.
This was great, keep on doing good work.
A true expert :thumbsup:
well i can tell you that the most used holders in denmark that i seen ( a educated machinest from denmark ) is BT holders over here ( denmark is part of erup )
This was great.
My kind of video. Jack, should a set of tool holders be scrapped If they were used in a spindle that needed to be re-ground?
Depends in there was any damage on them
If they've been used for any reasonable amount of time, they probably already carry witness marks transferred from the spindle before it was ground, or fretting. You will immediately transfer witness marks from your tool holder taper to your "new" spindle. Your tool holder taper is a reflection of your spindle taper (and vice-verse)...and whatever imperfections exist on your taper, will soon be present in your freshly ground spindle.
Here is a blooper. Pull out. Happened to me with an er collet on inconel 718 doing keyways. Also speaking of humming, I have a air grinder at work that does 90k, rippems i put a tool on it that was way too big to be used on it and called for some 30-50k rippems.
Thanks !!
Forgot to mention the actually tool grinding geometry has to be major factor as well peripheral and form
since when did he get a hermle ? did notice the logo on the shirt/polo
I have a Hermle.... shirt. ;)
@@nyccnc ohh okay. could be that you had also gotten a hermle for testing like the datron ( we had two hermle where i use to work. to be honest i like the haas controle better xD )
btw what F speed you the datron run at with max spindle speed for a finish pass ( also did you try putting a yg1-alu power in it ? just curios since im planing to get a 50k spindle in my own machine and like to know how dast the datron was going
best regards Marc
It says a lot about a company who makes a guy like that President. The only downside is I didn’t get to take any shots for every time he said a corporate buzz word.
big brain
#1 !
Great video. This explains why Haas probably started making cheap Chinese holders. Sell cheap holders to guys with SS machines then sell them new spindles every year ! !
This guy looks like a Bill Gates impersonator
Great video, but just do a normal interview, this is nonsense. I also heard 3 is the new 6...
You're a culture warrior huh?