This has been great. I suppose I was lucky enough to find a whole new wheel hub on rock auto with bearing. But the additional information of a new nut and cap was helpful. Thanks for the video!
The very first piece that you destroyed when you pried it off the drum (@3:08) was the water seal carrier that the rubber bearing seal on the spindle rides on. I see you did not replace it which will allow water/dirt to get into your new bearing. The water seal carrier is easily removed from the drum - without damage - by gently prying with a small flat blade screwdriver _from the inside and underneath_ it - not from the outside like you did.
Yes I did destroy it. It was replaced before installation. It doesn't show it there but if you watch the other side video (maybe posting at a later date) you'll see the replacement of that seal. I realized during editing it wasn't filmed. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@Toby_the_Glen we don't have that here. The salt and pot holes ruins cars in a matter of a few years. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
Why didn't you buy the drum with installed wheel bearing combination? Its only about 20 bucks more and the time savings alone is worth it. I've done three of these and you can do one side in 20 minutes with no cussing.
I know right I could not find one whatsoever. Ford could special order them but they wanted a ton of money for it. If you know where to find it shoot me a link and I will put it in the description for everyone else
This has been great. I suppose I was lucky enough to find a whole new wheel hub on rock auto with bearing. But the additional information of a new nut and cap was helpful. Thanks for the video!
Glad the video helped. Please like and subscribe for more
Great video, short and to the point. Thanks for posting
Glad the video helped. Please like and subscribe for more
The very first piece that you destroyed when you pried it off the drum (@3:08) was the water seal carrier that the rubber bearing seal on the spindle rides on. I see you did not replace it which will allow water/dirt to get into your new bearing. The water seal carrier is easily removed from the drum - without damage - by gently prying with a small flat blade screwdriver _from the inside and underneath_ it - not from the outside like you did.
Yes I did destroy it. It was replaced before installation. It doesn't show it there but if you watch the other side video (maybe posting at a later date) you'll see the replacement of that seal. I realized during editing it wasn't filmed. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
How do cars get that bad? Don't you have an annual inspection for roadworthyness.
@Toby_the_Glen we don't have that here. The salt and pot holes ruins cars in a matter of a few years. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
Why didn't you buy the drum with installed wheel bearing combination? Its only about 20 bucks more and the time savings alone is worth it. I've done three of these and you can do one side in 20 minutes with no cussing.
I know right I could not find one whatsoever. Ford could special order them but they wanted a ton of money for it. If you know where to find it shoot me a link and I will put it in the description for everyone else