Big fan of these bed extenders. Had one on my old truck and bought one for my new one. Saved me over $200 bucks from the shop thanks to your video! Installed it myself easily.
I was just blessed with the AMP Bed extender but friend didn’t have the hinge diagram that came with it. I’ve searched trying to find it but no luck. By chance can you help me out? Thanks either way!!
Thx for the installing video great help in my decision for this extender also watched your video on screening you found for that is excellent I will be ordering them both.
It would be nice if these extenders weren't rounded at the end and they came out square like the tailgate does for maximum usage because we're paying money for it so stop rounding the corners off when they make them so I'll make my own cause I can. I have a welder. I have a fabrication shop , and put it on the market. Let's see what happens.
You give props for it being made in the USA, but you're installing it on a foreign truck. Even if it's ASSEMBLED here in the U.S. it's still a Japanese truck.
@@Archifx nice. So can load the bed with stuff 3/4 full then stick the amp on and continue filling.. since with the amp down you won't be able to slide stuff to the back. Going to order on with the drillless kit.
Hi for the self tapper screws did you do 3/4in or 1/2in? Comments say 1/2 inch But the amazon link on your video description shows 3/4inch Thank for your video!
Those were 1/2” I believe. Here is where I got them on amazon. #10 x 1/2" Stainless Hex Washer Head Self Drilling Screws, (100pc), 410 Stainless Steel Self Tapping Choose Size and Qty www.amazon.com/dp/B076BWD954/ref=cm_sw_r_cp_apip_ZvLUAJtpWhhrO
What are you talking about? Truck is 💯 made in the USA amateur. Read a book for once. Maybe you’ll learn how to comprehend words and understand how they make facts
Yep typical internet hero that knows nothing. San Antonio boss man. American workers in supporting while buying a quality truck. But, keep commenting. You sound so smart 🤔
Big fan of these bed extenders. Had one on my old truck and bought one for my new one. Saved me over $200 bucks from the shop thanks to your video! Installed it myself easily.
I was just blessed with the AMP Bed extender but friend didn’t have the hinge diagram that came with it. I’ve searched trying to find it but no luck. By chance can you help me out?
Thanks either way!!
Thx for the installing video great help in my decision for this extender also watched your video on screening you found for that is excellent I will be ordering them both.
It would be nice if these extenders weren't rounded at the end and they came out square like the tailgate does for maximum usage because we're paying money for it so stop rounding the corners off when they make them so I'll make my own cause I can. I have a welder. I have a fabrication shop , and put it on the market. Let's see what happens.
Did you need to user the spacer kit?
I just ordered this for 2022 Tundra TRD Pro. It's on Amazon free shipping.
Nice, clean install. Ever think of screwing in a mesh screen onto the extender? I might try that after I pick one of these up.
Yeah. I made the video on that that you’ve probably watched already ;)
Thanks Brother! That made it super easy 🤙🏻
You give props for it being made in the USA, but you're installing it on a foreign truck. Even if it's ASSEMBLED here in the U.S. it's still a Japanese truck.
I know. I wish it was totally Japanese
It’s much more American than the big three. Do a google search
Great video, thanks for putting it together!
Perfect video, I am buying this!
In the description you include a link for “black mesh used in the video.” I don’t see where you used mesh anywhere in the video. Did I miss something?
It’s in this video ruclips.net/video/mNaPUh-yPyo/видео.html
this was a great video, my husband is buying one and he was thinking the same with the bolts.. safe tappers great idea
Can this bed extender be removed easily? Or is it pretty much permanent ?
Solid install and review video from start to finish. That punch trick was quality. Keep the vids coming.
Hello. Is this bed extender compatible with a Retraxpro xr tonneau cover?
As long as the brackets and the cover are above the rail
Thailand is not have this product for truck.
Nice video! I be getting one of these!
Hello I have tail cage is 4’7” Wide Does the only thing I have where can I buy can I do to fit the fit N150
These bed extenders are way overpriced for what they are. 300$-400$? it's just absurd. The aluminum used alone isn't even 60$ worth.
Can you remove it if say you have a bunch of lumber that is longer then the bed and tailgate.?
Thanks for reply
Yes. Pulls right off at a 45 deg angle. No tools needed.
@@Archifx nice. So can load the bed with stuff 3/4 full then stick the amp on and continue filling.. since with the amp down you won't be able to slide stuff to the back. Going to order on with the drillless kit.
Hi for the self tapper screws did you do 3/4in or 1/2in?
Comments say 1/2 inch
But the amazon link on your video description shows 3/4inch
Thank for your video!
Interesting my factory one used the bolt from the box tie down? I'm not drilling into the box.
Can it be easily stolen if someone lifts it out the bracket with the tailgate up?
Sure could.... but I’m sure something could be fanned up to block the jerks. Plus it’d be pretty useless without the mounts.
If the tailgate is locked you can't get the extender at a 45 degree angle to get it out.
Do you mind posting what size of the self tapping screws you utilized? Thanks.
Can you have this extender with a bed cover
Yes. It sets beneath the bed top.
What's the height of the two uprights? Trying to figure out if it'll clear my Roll N Lock.
What is the size for the self tappers?
Those were 1/2” I believe. Here is where I got them on amazon. #10 x 1/2" Stainless Hex Washer Head Self Drilling Screws, (100pc), 410 Stainless Steel Self Tapping Choose Size and Qty www.amazon.com/dp/B076BWD954/ref=cm_sw_r_cp_apip_ZvLUAJtpWhhrO
How hard is it to remove altogether? For instance, to load a riding mower or dirtbike that needs to take up the entire bed?
Easy. It just pulls right out the. Sets back in. You rotate it about 45 degrees and lift up
@@Archifx Can you post the model number. Great video!
so I am assuming by using the self tapping screws you don't need to remove the taillight and tighten down from inside per instructions?
Just curious, what are the straps for?
To keep it secured down but they don’t work with the tundra tailgate. I never use em. You’ll be fine.
@@Archifx gotcha, I appreciate the response
Hey I just ordered one myself just wondering what size the sell tapping screws are?
Made in the USA, except the truck
What are you talking about? Truck is 💯 made in the USA amateur. Read a book for once. Maybe you’ll learn how to comprehend words and understand how they make facts
Thanks for supporting Japan by buying the Tundra!!
Tundras are made in the Texas
Yep typical internet hero that knows nothing. San Antonio boss man. American workers in supporting while buying a quality truck. But, keep commenting. You sound so smart 🤔
Wasn’t directed at you tjh7797. You’re awesome. Was talking to the tool djchris lol
@@Archifx Guess he'd rather you buy a Mexican Ford.
The Toyota Tundra is the most American Made truck in America! Duh do some research jack! UAW blew it!