Toyota Pickup Cab Removal - Engine Stays

Поделиться
HTML-код
  • Опубликовано: 11 окт 2024
  • Today, we learn that a 2x4 can’t support the weight of a bare Toyota Truck Cab.
    On rusty part-out trucks, I’ve always removed the drivetrain first, then the cab…
    but this time, I’m going to try removing the cab first.
    Here are some other Toyota videos you may find helpful:
    Remove an Entire Toyota Rear Axle Assembly: • How to Remove an Entir...
    Install/Upgrade to V6 1" Master Cylinder on 4 cyl Toyota: • How to Install/Upgrade...
    Install Toyota Rear Axle Bearing, Oil Seal - WITHOUT a Press: • Install Toyota Pickup/...
    Replace Toyota Drive Shaft Center Support Carrier Bearing: • DIY: Toyota 4x4 Drive ...
    Trail Gear Hi-Steer install: • Trail Gear Hi-Steer in...
    Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
    Fixing Floor and Rocker panel rust: • Fixing Floor and Rocke...
    Remove Headliner in Toyota Pickup Truck: • How to: Remove Headlin...
    Remove Toyota Pickup & 4Runner COMPLETE Dash: • How To Remove Toyota P...
    Toyota 22RE Engine Teardown: • $100 Toyota 22RE Engin...
    22r Compression Test: • How to: Compression Te...
    Remove Toyota 22RE Engine & Transmission: • Remove Toyota Pickup T...
    Toyota Pickup/4Runner Vent Window Conversion: • How to: Toyota Pickup/...
    Remove Toyota Truck Rear Glass Window: • How to Remove Toyota T...
    Toyota 4x4 Transfer Case Rear Flange Oil Seal Replacement: • DIY: Toyota 4x4 Transf...
    Replace Pinion Oil Seal in Rear Diff: • How to Replace Toyota ...
    The Vent Window Conversion: • How to: Toyota Pickup/...
    Remove Door Panel: • How to: Remove Toyota ...
    LED Headlight Conversion: • How to: Install Toyota...
    Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
    Breaking a Rusty Toyota Frame in Half: • Breaking & Cutting Up ...
    Remove & Install B-Pillar Trim Covers: • Toyota Pickup/4Runner ...
    Toyota Pickup Fiberglass Bed Review: • Toyota Pickup Truck Fi...
    I don't have Patreon or ask for donations but you can support the channel with some rad gear from my store: 6thgeargarage.c...

Комментарии • 44

  • @mrbookends
    @mrbookends Год назад +2

    Legitimately helpful video, thanks! I have a 77 Datsun 620 with zero rust (New Mexico truck) and I'm toying with the idea of removing the cab so I can strip and repaint the frame rails

    • @6thGearGarage
      @6thGearGarage  Год назад

      I am currently in the process of doing this to a 1980 Toyota Long Bed from the south, except the cab floors were rotted because it sat outside for years with a broken window. ruclips.net/video/imb9VbzPupw/видео.html

  • @archygrey9093
    @archygrey9093 Год назад +2

    My 1981 Hilux is the opposite lol, the cab is rusty as hell but the chassis only has very light surface rust.
    Your cab looks mint compared to mine, mines full of holes in the roof, bonnet, lower doors and floors.
    This is due to the fact that where I live in Australia we don't have road salt but rather salt in the sea breeze and morning dew due to our coastal location, meaning that most vehicles rust from the top down rather than the bottom up, unless they are driven on the beach

    • @6thGearGarage
      @6thGearGarage  Год назад

      I'm restoring a 1980 on the channel right now (actually using 2 crappy trucks to make one good 1980) and one of mine is the same... excellent frame but rusty cab.

  • @kuharua54
    @kuharua54 3 года назад +7

    Never thought another hilux could make me feel good about my rust! Mines looking pristine compared to this!

  • @andrewo8987
    @andrewo8987 5 лет назад +1

    Working under my Michigan salt soaked 96 4Runner was a pain in the ass. It was the donor for my Tacoma 4WD conversion and I'm used to working under clean frame Texas/New Mexico trucks. I could probably have collapsed the entire rear of the frame with a few hammer hits. Which is insane to think about since someone was driving it up until it's motor went and I bought it.

  • @DirtGarage
    @DirtGarage 5 лет назад +2

    Yikes! That thing is waay more rotten than I thought watching your other videos on it!! Glad mines good 😂

    • @6thGearGarage
      @6thGearGarage  5 лет назад +2

      Dirt Garage yeah I'm jealous... Every Toyota truck I've ever bought had rusty frames to some extent.

    • @DirtGarage
      @DirtGarage 5 лет назад +1

      @@6thGearGarage I had to replace the gas tank crossbar, but that's it!

    • @6thGearGarage
      @6thGearGarage  5 лет назад

      Dirt Garage I remember that vid... I like how you did it.

    • @DirtGarage
      @DirtGarage 5 лет назад

      @@6thGearGarage Yeah I just used a smaller diameter pipe, bit thicker, and kinda sleeved it into the old bars place!

  • @CrackerMcGillicuddy
    @CrackerMcGillicuddy 2 года назад +1

    That rust is crazy. Gotta undercoat the vehicle every year

  • @JustinG85
    @JustinG85 5 лет назад +6

    As a fellow Ohioan, I know the pain of rust and road salt :(

  • @KaiSIndvik
    @KaiSIndvik 4 года назад +3

    dang all that rust was hard to look at, its gonna be giving me nightmares now ha

  • @questioneverything.1178
    @questioneverything.1178 4 года назад +2

    0:26... YOU ARE SO STRONG

  • @itiswatts5967
    @itiswatts5967 7 дней назад +1

    What all did you have to remove so you could pull the cab off with removing the engine.
    I’ve got a rusty 86 I want to do a cab replacement on.

    • @6thGearGarage
      @6thGearGarage  5 дней назад +1

      Here is a video of the full process on my 1980. I also pulled the engine before removing the cab. because I was moving everything to a fresh frame, but I could have left the engine in place but I would have had to lift the cab a lot higher to get over it. How to Remove Toyota Hilux/Pickup TruckCab by Myself
      ruclips.net/video/L3H6z2gbSHs/видео.html

    • @itiswatts5967
      @itiswatts5967 5 дней назад

      @@6thGearGarage awesome thanks for the reply!

  • @calebtaylor3835
    @calebtaylor3835 3 года назад +4

    My science fair project is to find an alternative to salt for melting ice.
    Clearly it’s a problem, and I’m surprised it’s still used.

    • @6thGearGarage
      @6thGearGarage  3 года назад

      I’ve read that some areas use a solution based on beet juice, but it is more expensive and still a little corrosive.

    • @calebtaylor3835
      @calebtaylor3835 3 года назад

      Interesting

    • @013chopper
      @013chopper 3 года назад

      Try saw dust. Here where i live in Finland we have some kind of experiment to prevent slippery. It wont melt ice but it is rising friction.

  • @josueplascencia3227
    @josueplascencia3227 4 года назад +1

    What's rust? I thought it was a factory color camouflage

  • @yotaartztv5580
    @yotaartztv5580 5 лет назад +2

    When I swapped the cab on my Truck I used a Homemade Wood beam adapter to my engine hoist and it was easy I just needed people on the front to keep it from Nose diving

    • @6thGearGarage
      @6thGearGarage  5 лет назад +1

      I had a buddy unload a complete cab w/ interior from a trailer by putting a 2x8 board through the top of the doors and he balanced the cab on a hoist, under the board in the center of the roof. Sketchy but it worked!

  • @cesargeronimorezamontantes7120
    @cesargeronimorezamontantes7120 Год назад +1

    Do you have the part number of the screw and suspension of cabin??

    • @6thGearGarage
      @6thGearGarage  Год назад

      Do you mean the body mount bolts and bushings?

  • @ColonCrusher
    @ColonCrusher 3 года назад +1

    Is it easier to pull the cab off over the engine?

    • @6thGearGarage
      @6thGearGarage  3 года назад

      If you use a load leveler, the engine should come out pretty easy with the cab still on. I had someone buying the cab, so I removed it first.

  • @AmericaBumpertoBumper
    @AmericaBumpertoBumper 5 лет назад

    Great Video my friend.

  • @TheBugbugboy
    @TheBugbugboy 4 года назад

    so much cooler when you don't pull the body with an engine puller

  • @dekotamaynard4220
    @dekotamaynard4220 4 года назад

    You know where i can find a 1992 toyota hilux 4x4 standard cab frame

    • @6thGearGarage
      @6thGearGarage  4 года назад

      Everything has rust around here. I'd look for a used one down south/west.

  • @cra4war
    @cra4war 2 года назад +1

    Rust belts finest 🙂 sucks what we have to deal with.

    • @6thGearGarage
      @6thGearGarage  2 года назад +2

      Haha, yep! funny how it's just a way of life and it doesn't even surprise me anymore.

    • @cra4war
      @cra4war 2 года назад +1

      @@6thGearGarage oh the people out west don’t get it, they scrap perfectly fine vehicles 😂 I’ve driven literally death traps like it’s normal because it is normal 😅

  • @854XTOY
    @854XTOY 3 года назад +3

    Seeing all that rust makes me sad

    • @6thGearGarage
      @6thGearGarage  3 года назад +2

      It's sad that I'm used to it by now. I just picked up a very rusty 1980 pickup that I'm going to attempt to restore this summer.

  • @oliverlarrow8279
    @oliverlarrow8279 5 лет назад

    I live in Alaska so I know all about road salt

  • @NotSoCrazyNinja
    @NotSoCrazyNinja 5 лет назад +2

    Rust = weight reduction bro

  • @Pointyman77
    @Pointyman77 5 лет назад +1

    Whats rust!!!