Thanks Huddison. I followed you guide and got it all working, well almost all. I ran into trouble with the last two procedures, I programmed the switch on my throttle quadrant to jump in and out of drone and cockpit camera's but when I went to fly and go to drone camera, it would lower the flaps as well and when I went to raise the flaps, I'd end up in the cockpit again. Don't know what I did wrong, Never mind, I just use the INS key to jump from cockpit to drone. I had installed the Lydd Airfield from Burning Blue Designs and that's fantastic too. I then flew from Lydd to London City, then to Gloucestershire and finally on to Cardiff. It was great to be able to fly in formation with the plane and check out the scenery as flying passed. Thanks again, Dave.
Great to hear it helped Dave. I find it incredibly useful to have the Drone camera setup on the same flight controller/yoke that I am currently flying with.
Brilliant, brilliant, brilliant. Not only did you present the information in a very clear manner you did it S-L-O-W-L-Y and that’s fantastic. From now on, esteemed friend, you are my MSFS 2020 guru!💁🏻♂️
OMG I tried for hours setting up my controllers until I find this video!!!!!! Excellent job explaining everything. The main tip you provided was the "scanning tool " to select the actual bottom to select. TY so much!!!!!
The best tutorial by far for this cameras key allocations and most important methodical and well presented for those of us who are learning flight sim functions.
Thanks so much as I was having issue with Xbox controller conflicting with trim on my Honeycomb Alfa. This should clear that up. You are probably the best on any and I mean any instructions on anything on MSFS. Thanks a million.
Huddison, I left a comment on your vid on setting up the Hat Switch for the external camera asking about the drone. You did it! Great job as you always do. Many thanks.
A bit late to the party, but I adopted your drone camera assignments on my own Saitek yoke. This said, the keyboard is always close by, so I use the default INS key to toggle the drone camera and the numpad 5 key to reset the drone to the starting point. Tx for the tips!
Thanks for sharing! Excellent job demonstrating how to setup all the drone camera features, so cool all the extras you can do with FS2020. Is there a way to take advantage of the Mode selector switch on the Saitek Yoke System to program in more of the available options?
Hi there very very new to this sim & I’m trying to set set up Xbox controller just for my drone camera what are the best & easiest to setup. Many thx Paul 😊👍
Yes, the easiest way is to mouse up to the top of the screen, to the menu up there: select the camera looking icon and you can reset drone view to the initial starting point.
Hi sir, my name is Patrick N. I'm one of the subscribers. I have watched almost all of your videos in binding control. But there is none about virpil products. I'm having trouble binding joystick and throttle in MFS. Please can you make one. Thanks
ive somehow lost my throttle control setting within MSFS control options, any chance you could assist me on how to delete my current logitech flight yoke and throttle quadrant and reinstall them to get it back or tell me if there is a simpler way?
Thanks Huddison. I followed you guide and got it all working, well almost all. I ran into trouble with the last two procedures, I programmed the switch on my throttle quadrant to jump in and out of drone and cockpit camera's but when I went to fly and go to drone camera, it would lower the flaps as well and when I went to raise the flaps, I'd end up in the cockpit again. Don't know what I did wrong, Never mind, I just use the INS key to jump from cockpit to drone. I had installed the Lydd Airfield from Burning Blue Designs and that's fantastic too. I then flew from Lydd to London City, then to Gloucestershire and finally on to Cardiff. It was great to be able to fly in formation with the plane and check out the scenery as flying passed. Thanks again, Dave.
Great to hear it helped Dave. I find it incredibly useful to have the Drone camera setup on the same flight controller/yoke that I am currently flying with.
Brilliant, that's six beers I owe you now. Your instructional video's are first class mate.
Thanks Brad.
Brilliant, brilliant, brilliant. Not only did you present the information in a very clear manner you did it S-L-O-W-L-Y and that’s fantastic. From now on, esteemed friend, you are my MSFS 2020 guru!💁🏻♂️
Thank you, that's great to hear :)
OMG I tried for hours setting up my controllers until I find this video!!!!!! Excellent job explaining everything. The main tip you provided was the "scanning tool " to select the actual bottom to select. TY so much!!!!!
Most welcome!
Glad you're back, sorry you got hacked!! Your videos are awesome, even in 2023!!!
Thanks Ken!
The best tutorial by far for this cameras key allocations and most important methodical and well presented for those of us who are learning flight sim functions.
Wonderful - thank you Bruce 🙏
Thanks so much as I was having issue with Xbox controller conflicting with trim on my Honeycomb Alfa. This should clear that up. You are probably the best on any and I mean any instructions on anything on MSFS. Thanks a million.
You humble me, thanks 😊
Huddison, I left a comment on your vid on setting up the Hat Switch for the external camera asking about the drone. You did it! Great job as you always do. Many thanks.
Thanks Don :)
A bit late to the party, but I adopted your drone camera assignments on my own Saitek yoke. This said, the keyboard is always close by, so I use the default INS key to toggle the drone camera and the numpad 5 key to reset the drone to the starting point. Tx for the tips!
It's never too late 😉
Greets from NZCH! Thanks for your time and video, - most enlightening. Stay well! 🍻
Greetings and thanks for watching :)
Thanks for the clear detailed explanation! You have helped me A lot with all the settings. 👍🏼
Glad it helped.
Brilliant! Thanks from Sweden 😃
Thank you too 😎
Yoke on its way! Thanks mate!!
Excellent news, enjoy it! ;)
thank you for an awesome tutorial!
You're very welcome!
10/10 review thanks a lot mate
Appreciated, thanks.
Thanks for sharing! Excellent job demonstrating how to setup all the drone camera features, so cool all the extras you can do with FS2020. Is there a way to take advantage of the Mode selector switch on the Saitek Yoke System to program in more of the available options?
Brilliant question: none that I've found, re mode selector - but I'll keep trying ;)
Brilliant. Love these helpful vids.
Thank you also ;)
Finaly I am able to use my drone. Thanks aq lot.
Happy to be of help :)
Great Great Video. Thank you.
Glad you enjoyed it.
Hi there very very new to this sim & I’m trying to set set up Xbox controller just for my drone camera what are the best & easiest to setup. Many thx Paul 😊👍
Join our Discord and we can talk oyu through it there: discord.gg/xDKwFYDsZk
Brilliant. Thank you. Now I can finally enjoy my new Heathrow scenery add on and explore the inside of the terminals.
Can you use thee hat switch for external and drone views? Or just one of them
You can set it up for both: check through my videos as I have a few out on how to do this.
Is there a way to 'reset' the drone view? That is, to take the drone back to the point where it stated? Thanks ~
Yes, the easiest way is to mouse up to the top of the screen, to the menu up there: select the camera looking icon and you can reset drone view to the initial starting point.
Thanks. As always, the easiest solution is the best!
Fantástic 👍
Hey @Huddison. I have the Problem i cant use the Mouse View in External View anymore. I have tryed standart setting too. doesnt work. Can u help me?
Which version of MSFS are you running - Pc or Xbox?
@@Huddison PC but i viewed ur tutorial and now it works with the flightstick thxx
Hi sir, my name is Patrick N. I'm one of the subscribers. I have watched almost all of your videos in binding control. But there is none about virpil products. I'm having trouble binding joystick and throttle in MFS.
Please can you make one.
Thanks
I'm afraid that I don't own a Virpil product; but we should be able to help you set it up in our Discord.
My FS has been crashing every time I open it and try to download the 15Gb update. Been locked out for a week.
Not good; just hope you don't need to reinstall the entire Sim.
What version do you have (MS store or Steam)?
@@Huddison Running as admin seems to be working.
ive somehow lost my throttle control setting within MSFS control options, any chance you could assist me on how to delete my current logitech flight yoke and throttle quadrant and reinstall them to get it back or tell me if there is a simpler way?
Best jumping onto Discord for this.
its not working for me can anyone help? It's triggering whilst in drone mode im not sure what to do
What's triggering?
does the Logitech flight yoke work on msfs on xbox? because i cant seem to get it working
It does not unfortunately.
@@Huddison oh okay thank you
What Make and Model Flight Yoke is this ?
The Logitech Flight Yoke System
One other quick question. I presume one must go into ACTIVE PAUSE before droning about lest your plane may crash. 🤦🏼
Yes that's fully advisable 🤕
What about "X" axis and "Y" axis to configure insted of rocker switch ???
That sounds feasible.