Grooving with Radius|| Radius Grooving manual programming || Grooving programming with radius||

Поделиться
HTML-код
  • Опубликовано: 2 ноя 2024
  • Hello friends,
    In this video today we will learn how to make a program of grooving with radius How the grooving tool works in radius grooving programming. In this video. Today we will learn how to grooving with radius on the outer diameter. To join my social media network Telegram, Facebook page, click on the link given in the description and join.
    #outerdiagrooving
    #groovingwithradius
    #gradusgroovingprogramming
    #radiusandgroovingoperationcncprogramming,
    #cncgurumahendravermahindi
    #cncgurumahendraverma
    डीयर friends मेरे टेलीग्राम ग्रुप को भी जोइन करें ।
    t.me/joinchat/...
    चेनल के फेसबुक पेज को भी फॉलो करें
    / cncexpertverma
    RUclips Chenal Link
    ruclips.net/user/ch....
    Cnc programming
    Cnc part programming.
    Cnc programming in hindi
    Canned cycle programming.
    radius grooving programming .
    • Grooving with Radius||...
    long length grooving
    • How to cut Groove on c...
    इन्सर्ट कटिंग टूल्स फाइल देखने के लिए इस लिंक को ओपन करें
    s.docworkspace...
    FOUR PILLARS OF SUCCESSFUL LIFE
    • #Fourpillarsofsuccessf...
    चैनल के new व्हाट्सअप ग्रुप से जुड़ने के लिए लिंक को खोल कर ग्रुप ज्वाइन करें
    chat.whatsapp....
    चैनल के व्हाट्सअप ग्रुप से जुड़ने के लिए लिंक को खोल कर ग्रुप ज्वाइन करें
    chat.whatsapp....
    नीचे दिए गये लिंक को खोल कर CNC प्रोग्रामिंग का पूरा कोर्स सीख सकते हैं
    • Playlist
    insert cutting tools
    • Insert cutting tool fo...
    How to set chuck pressure in cnc machine .
    • How to set Chuck press...
    Face Grooving cycle G74
    • #FaceGroovingcycleG74#...
    taper and chamfer manual calculation
    • CNC programming taper ...
    CNC प्रोग्रामर कैसे बनें
    ball radius programming
    • Ball Radius programmin...
    Clockwise radius
    • #ClockwiseRadiusprogra...
    counter clockwise radius
    • #HowtomakeRadiusCounte...
    threading cycle
    • Threading cycle progra...
    Facing cycle programming in
    g78 and g94 code • Video
    Multiple tool programming
    • #CNCMULTIPLETOOLPROGRA...
    Taper turning program
    • How to make Taper turn...
    RPM,CUTTING SPEED,FEED • G code system selectio...
    Types of cnc machine
    • #Typesofcncmachine# CN...
    G73 PETRAN REPTING CYCLE • #G73patterrepeatingcyc...
    G72 STOCK REMOVAL IN FACING
    • #G72stockremovalinfaci...
    G71 Stock removal od / I'd • #G71cannedcycleprogram...
    coordinates of chamfer and Radius
    • #EngineeringDrawinglin...
    Types of cnc programming • Types of cnc programmi...
    G Code of CNC • G code of cnc programm...
    M CODE OF CNC • M code of cnc turning ...
    CNC Address code • Address code of cnc pr...
    How to make new program of cnc turning
    • How to create cnc pro...
    Main parts of cnc turning
    • Main Parts of cnc turn...
    Operation of cnc turning machine
    • Operations of CNC turn...

Комментарии • 153

  • @ramesharyavlogs2021
    @ramesharyavlogs2021 2 года назад +1

    Verma ji very nice video,, Jo doubt hota hai wo clear ho jata hai man se,,

    • @cncguru1993
      @cncguru1993  2 года назад

      Thanks for watching this video

  • @vasimansari1919
    @vasimansari1919 4 года назад +2

    Aise.hi.video.banaae.very.good

  • @AjayKumar-mu6fz
    @AjayKumar-mu6fz 4 года назад +1

    बहुत अच्छा प्रोग्राम बनाया है भाई

  • @kishanchauhan9154
    @kishanchauhan9154 Год назад +1

    Maza Agaya sir ji thank you 🥰

  • @rambachanmaurya7278
    @rambachanmaurya7278 4 года назад +1

    Bahut acchi video Banaya sir radius thank you so much feeling🙏🙏🙏🙏🙏

  • @er.narenderrawat1150
    @er.narenderrawat1150 2 года назад

    Thanks ,best of luck

  • @HimanshuGupta-wk8ig
    @HimanshuGupta-wk8ig 2 года назад +1

    Bhut achhe sir

  • @sonukumarabhinavanand
    @sonukumarabhinavanand 3 года назад +2

    Aapka video bilkul practical based hota hai sir 👌👌👌👌👌
    I am very very satisfy by You sir

    • @cncguru1993
      @cncguru1993  3 года назад

      Thanks for Watching

    • @harshad553
      @harshad553 2 года назад

      @@cncguru1993 sir isme G41 Or G 42 nahi lagana he kyaa

  • @venkateshk1455
    @venkateshk1455 Год назад +1

    Thank you. very good explaination 🙏

  • @chetansharma6186
    @chetansharma6186 4 года назад +1

    Sir bahut achhe vedio h sir

  • @akshaykumarkushwaha6880
    @akshaykumarkushwaha6880 2 года назад +1

    Good example sir ji

  • @sagarhalpati2241
    @sagarhalpati2241 3 года назад +1

    Super video

  • @parjotsingh4008
    @parjotsingh4008 4 года назад +1

    Bahot helpful video sir

  • @manojmahto2793
    @manojmahto2793 3 года назад +1

    Thanks sir 👍 very helpful video

  • @saifurrehman1570
    @saifurrehman1570 2 года назад +1

    Love u bhai from Pakistan 🇵🇰

  • @harilaljatavath1707
    @harilaljatavath1707 3 года назад +1

    Very good explain sir

  • @rajendragupta-fm6bd
    @rajendragupta-fm6bd 4 года назад +1

    Nice video

  • @anujsagarcreation7379
    @anujsagarcreation7379 Месяц назад +1

    Nice sir ❤

  • @MohammedIqbal-df1bj
    @MohammedIqbal-df1bj 2 года назад +1

    Nice video really helpful ❤️

  • @santoshkumar-pb
    @santoshkumar-pb 4 года назад +1

    Very good video sir

  • @sagarhalpati2241
    @sagarhalpati2241 3 года назад +2

    Dimaag me gus gaya Puru video

  • @rameshrameshchennai8050
    @rameshrameshchennai8050 2 года назад +1

    Good

  • @vasimansari1919
    @vasimansari1919 4 года назад +1

    Very good sir

  • @RealfactsTube
    @RealfactsTube 4 года назад +1

    Very helpful sir

  • @learningcnc
    @learningcnc 4 года назад +1

    Ausame content Brother

  • @Technic2023
    @Technic2023 Год назад

    I hope you will guide me to solve this problem.... Thanks

  • @tappubhaiya4522
    @tappubhaiya4522 4 года назад +1

    Thanks sir ji

  • @karansah2731
    @karansah2731 4 года назад +1

    Best video!

  • @Technic2023
    @Technic2023 Год назад

    Hi Sir,
    I hope you are doing well
    I'm one of your follower and keep watching your videos to increase my knowledge in cnc / vmc machining.
    I'm working in KSA as cnc machine operator. Since yesterday I'm facing one issue in cnc fanuc turning machine that when I execute cycle program after tool changing program cycle stopped automatically and x is not working but there is no alarm. Please guide me what to do and how to solve this issue. In manual mode turret is working maybe some command activated which need to deactivate but I have tried with g40 but no use.
    Please advise... Thanks a lot

  • @durgeshupadhyay304
    @durgeshupadhyay304 4 года назад +1

    Sir 45digree boring bar ke sath both side caunter kaise lagae ki partin karne par back side counter par bar na bane vidio bano sir please

  • @vikasbhingardive4822
    @vikasbhingardive4822 4 года назад

    Thanks bhai same profile work karna tha

    • @vikasbhingardive4822
      @vikasbhingardive4822 4 года назад +1

      Sir groove insert 4 mm hai
      Offset mai tool radius kitna dalan hoga

    • @cncguru1993
      @cncguru1993  4 года назад

      Jo tool ka Radius hoga vahi dalna hai

    • @middleclassboyvlogvideos5589
      @middleclassboyvlogvideos5589 3 года назад

      @@cncguru1993 sar radius ka program pating say marne ke liye cycle ka program bataiye na kaise hoga

  • @VIJAYKUMAR-gq2zb
    @VIJAYKUMAR-gq2zb 8 месяцев назад

    Tq bro❤

  • @bollywoodsong9237
    @bollywoodsong9237 2 года назад +1

    Jaise bataya gya hua waise me step bab jayega Z-14. 5 last cut pe radious pe

  • @DastagirJunnedikarajagi
    @DastagirJunnedikarajagi 4 года назад +1

    Nice 👍

  • @cncbasicprogrammingrajeshv4866
    @cncbasicprogrammingrajeshv4866 3 года назад

    nice sir g

  • @VanshMRajput
    @VanshMRajput 3 года назад +2

    Outer diameter par badi full radius wala program Banav na sir.expample 5 raduis

  • @Vishuganesh
    @Vishuganesh 4 года назад +1

    Thanku ...sir

  • @Mahendrakumar-lq2cd
    @Mahendrakumar-lq2cd 4 года назад +1

    Thanks sir tool nose radius per programming bat aye.

  • @nikhilpatil4185
    @nikhilpatil4185 2 года назад +1

    Nice👍🏻

  • @yuvarajraj4144
    @yuvarajraj4144 4 года назад +1

    Super , one tool method waste rough tool and finish tool right written upload me sir

  • @vishalrajbhar7240
    @vishalrajbhar7240 3 года назад +1

    Sir sem Video par Chamfar ke liye Video bataiye

  • @RealfactsTube
    @RealfactsTube 4 года назад +1

    Thank you...

  • @gangadhardas3318
    @gangadhardas3318 4 года назад +1

    Sir programming long hua..kuchu short trick batao M.sir 👍👍👍👍💥💥💥💥💥💥

  • @Gslearner
    @Gslearner 4 года назад +2

    Z-14.5 last me jo aapne btaya

  • @sanjaykapar2886
    @sanjaykapar2886 Год назад

    Sir jab ham final redius lagake 14.5 pe ayenge to 0.5 hamara farist side ka redius kat jayega it's Rong direction sir.

  • @RS2Entertainment
    @RS2Entertainment 2 года назад +1

    Sir chamfer ka vi video banaeya

  • @vishalnegi791
    @vishalnegi791 3 года назад

    tq sir

  • @rayduambhati3418
    @rayduambhati3418 3 года назад

    Sir kya aap programming class dete hai

  • @ashutoshsandhu130
    @ashutoshsandhu130 2 года назад

    👌👍💯

  • @parveenpal4549
    @parveenpal4549 4 года назад +1

    Tool compasation ka uper v video bano

  • @sushilyadav2807
    @sushilyadav2807 Год назад +2

    Sir same face grove program banaye

  • @TraderRajuBihari
    @TraderRajuBihari 4 года назад +1

    Tepar grooving kaise hota h sir es pr v video banaiye

  • @pannalaljaiswal28
    @pannalaljaiswal28 4 года назад +1

    Sir yadi chamfer lagana ho to. Us par program banaye

  • @amarnathengineering8173
    @amarnathengineering8173 4 года назад +1

    Sir ji i want to know about 24mm dia round ball making how to making cnc program

  • @Gslearner
    @Gslearner 4 года назад +2

    Sir jb hum 14.5 krenge to wo radisus me hit krega na??

  • @SonuKumar-gy1gm
    @SonuKumar-gy1gm 3 года назад +1

    Sscnc software kaise chalta hai video banaiye is pr

  • @rajpatikumar9222
    @rajpatikumar9222 Год назад

    Sir G75 ham p ke bailu +Q ke bailu dono dalsakte hai ke nahi hamre company me keval p ki bailu dalte hai please btao

  • @ravisingh-tm3hj
    @ravisingh-tm3hj 2 года назад +1

    Agar isi me 5 ka radius lgana ho to rough me kitna material chhodenge sir?

  • @gopalingle1972
    @gopalingle1972 2 года назад +1

    सर आपने उपर से radius मारा to go2आना मंगता है ना आप का correction भी go2 का है प्लीज रिप्लाय सर

    • @cncguru1993
      @cncguru1993  2 года назад

      Dear aap ek bar video ko dhyan se dekho sab smaj aa jye ga

  • @vrraipurchhattisgarh951
    @vrraipurchhattisgarh951 10 месяцев назад +1

    Radius grooving ka program Siemens 828D bana kar dikhaye na

  • @shivamkumar-d8g1p
    @shivamkumar-d8g1p Год назад

    Sir ji jab B point z -15 .0 par hoga to A point z-17.0 par hoga jabki grove hamara sirf z-16.0mm me hai

  • @yashpalsingh8526
    @yashpalsingh8526 2 года назад

    Sir I'd me radius ka program bhi banao plz

  • @poojabansode4205
    @poojabansode4205 4 года назад

    Sir iam from hyd

    • @poojabansode4205
      @poojabansode4205 4 года назад

      Sir aap ne angle ko radies se match Karne Ka ek prg banayatha sir job ke starting me angle ho to vusko radies match Karne Ka batai ye sir

    • @cncguru1993
      @cncguru1993  4 года назад

      Ok ji jarur batyenge

  • @kariyanna37w10
    @kariyanna37w10 2 года назад

    Sir tool nose radius calculate naye karte hai

  • @mukundmistry1661
    @mukundmistry1661 4 года назад +1

    Thank you sir

  • @munnagupta0982
    @munnagupta0982 2 года назад +1

    U,V groove cycle program kaise banaye

    • @cncguru1993
      @cncguru1993  2 года назад

      Dear iske G75 me U grove bna sakte ho

  • @arunrajchaurasiya4028
    @arunrajchaurasiya4028 3 года назад +1

    Mla chha bval aahe.

  • @harshchogale3063
    @harshchogale3063 3 года назад +1

    Easy in G72 cycle od with radius

  • @shivamkumar-d8g1p
    @shivamkumar-d8g1p Год назад

    Sir ji jab B point z -15 .0 par hoga to A point z-17.0 par hoga jabki grove hamara sirf z-16.0mm me hai😮😮😮

  • @sonukumarabhinavanand
    @sonukumarabhinavanand 3 года назад

    💝💝💝💝💝

  • @atul888
    @atul888 3 года назад

    Sir insert ki radius b ad hota h

  • @karansaha8323
    @karansaha8323 2 года назад +1

    Radius banane ke liye 1 mm material chod rahe hai insert pe laod aayga insert break ho sakta hai

    • @cncguru1993
      @cncguru1993  2 года назад

      Ye sirf samjhne ke liye hai aap metal kam bhi rakh raksakte ho

  • @ganeshlondhe3958
    @ganeshlondhe3958 3 года назад

    Bhai insert ka radious kon add karega

  • @shailendradurge8268
    @shailendradurge8268 Год назад +1

    insert aur tool kon sa hoga

  • @karansaha8323
    @karansaha8323 2 года назад

    Sir id me groove tool se radius kaise lagaye

  • @arif11
    @arif11 4 года назад +2

    G76 ki taper threading cycle please

  • @ArjunSingh-wg8ss
    @ArjunSingh-wg8ss 2 года назад +1

    G95 feed mm per revolution

    • @cncguru1993
      @cncguru1993  2 года назад

      Dear G99 or G95 dono hote hai ...Aap mera GSA ,GSB,Or GSC wala video dekho

  • @vandanawankhede6622
    @vandanawankhede6622 4 года назад +1

    Sir Cnc vmc program ki kitab hogi to bataiye

    • @cncguru1993
      @cncguru1993  4 года назад

      Book la kya kro ge mere chenal pr jo bhi video hai sab ko watch kro apne aap nots bn jye ga

    • @cncguru1993
      @cncguru1993  4 года назад

      Book to bot mill jye gi Markit me

  • @rajeshjujare2088
    @rajeshjujare2088 Год назад

    Sir grooving with chamfer please

  • @vijaykumar-ww3wn
    @vijaykumar-ww3wn 3 года назад

    Sir gruving ka birth badhana ho to kaise badhaye

  • @yuvarajraj4144
    @yuvarajraj4144 4 года назад +1

    rough tool method finish tool method

  • @shivamkumar-d8g1p
    @shivamkumar-d8g1p Год назад

    Sir apne dia to pahle hi 40.5 ka cut kar Diya hai redis ke liye metrial kha milega

  • @mouryaarum3628
    @mouryaarum3628 4 года назад +1

    Groovl one vedo banye

  • @riteshvlogs0011
    @riteshvlogs0011 6 месяцев назад

    Iska cycle program bta do

  • @manojnirmalkar2316
    @manojnirmalkar2316 2 года назад

    Insert ka radius kitna hai

  • @Ashwin.2005
    @Ashwin.2005 Год назад

    Ager redius ko Cr se mar ni hoto kaise lagaye

  • @ramjanmnishad337
    @ramjanmnishad337 2 года назад +1

    Sir ji toll to 40.5 na jakar 39.5 jayegha na sayad tabhi to 0.5 materials chutegha

    • @cncguru1993
      @cncguru1993  2 года назад

      Video ko dhyan se dekho dear

  • @sunnysharma8057
    @sunnysharma8057 3 года назад

    apka radius inside lg raha hai... outer nhi lg raha jaisa drawing mein

  • @sunilkumarskpatil1071
    @sunilkumarskpatil1071 3 года назад +1

    G02 And G03 ತಪ್ಪು madiddiri

  • @jacky6846
    @jacky6846 4 года назад +1

    Where is the G42

    • @cncguru1993
      @cncguru1993  4 года назад

      Ha use kr sakte hai agar nhi bhi kiya to tool fir bhi working krta hai

  • @anilthakor859
    @anilthakor859 2 года назад

    Sir aapka number milega...

  • @SaurabhKumar-km5df
    @SaurabhKumar-km5df 4 года назад +1

    Nice video

  • @rahimansari9401
    @rahimansari9401 4 года назад +1

    Super video

  • @tappubhaiya4522
    @tappubhaiya4522 4 года назад +1

    Thanks sir ji

  • @TraderRajuBihari
    @TraderRajuBihari 4 года назад +1

    Nice

  • @shivamkumar-d8g1p
    @shivamkumar-d8g1p Год назад

    Sir ji jab B point z -15 .0 par hoga to A point z-17.0 par hoga jabki grove hamara sirf z-16.0mm me hai