Это видео недоступно.
Сожалеем об этом.
Venduino, Arduino Vending Machine
HTML-код
- Опубликовано: 14 июн 2016
- How to build a tiny vending machine from scratch. Parts: an Arduino Uno, four continuous rotation servos and a Nokia 5110 LCD.
The cutout on the top is for a clear window that I did not install for this video. Leaving it open allows for easy access when demoing the machine.
I am no longer selling kits: however this project is now open source! Version 2.0 video is here:
• Venduino 2 | Arduino V...
Link to the full code, CAD files, and circuit:
github.com/ret...
You look like micheal from Vsauce
True
Not the only one who thought that, then!
First time hearing this
Ryan Bates haha look at Vsauce's channel. you are a spitting image of Michael xD. if only I could achieve a beard so great as well haha
I thought the same
By far the best DIY, complete with coding and circuit picture!
Bro..the above diag and code works properly??
Me before watching the video: "I'm gonna make a vending machine!!!!"
Me 4 minutes into the video: "Oh my god I wanna die."
This is an adorable Arduino project! :) Going to add to my to make list!
0:00 - "Vsauce, Michael here!"
I love the dry humor! Glad your creation includes all necessary vending machine features, including things getting stuck :P
will you tell me tell what thing Ryan Bates has used on arduino by placing ic bed?????????
it's a logic level shifter, details( see link) in the desc.
You are without a shadow of a doubt one of the BEST I seen... THANKS SO MUCH! Your the man...
I am NOW A SUBSCRIBER.... YOUR AMAZING!!!!
Hi Ryan. So happy to find this video of yours. Thankyou!
Cool project. What laser cutter did you use for the wood frame?
trotec speedy 300
I would love to see mini Vending machine but decorated to look like the all time most famous of Vending machines, The Japanese Vending Machine. It has bright colors and a lit face plate with the name of the machine. Maybe some flashing lights and what not would be cool.
Hey Vsauce, where do you get the wood made?
"What is this? A vending machine for ants?!"
XD
Ryan Bates can I use a coin slot counter and just make it pulse the signal like this would do?
yup
Ryan Bates ok thanks!
Is it homemade?
Magnifique pour décorer sa maison, cela me rappel les années 1990 :)
Which software did you use for modelling the pieces?
What if you substitute servomotors for steppermotors, would it work as well?
The vending machine is great. I am planning on doing one with my little cousin. Thanks for sharing
Hi, I was wondering if you were able to suggest some learning material like tutorials that can get me started learning arduino and creating custom fabrications of my own. Thanks for the cool upload
shakes machine get extra tea. lol
Hi. Very cool project. I want to add a bill acceptor and set the sensor to confirm the delivery of the goods . Maybe it's all on the Arduino or not? I would very much like to know your opinion.
Thank you Ryan, I wishes i watches this video sooner.
What video editing software do you use? It seems to do a very good job at speeding up audio.
microsoft movie maker
really cool, I like it, man, regards from Buenos Aires!
Thanks a lot for this video very helpful
You are welcome! thanks for watching.
@@RetroBuiltGames Sir it seems the code uploaded is not working can you share the codes to me? sorry if Im just new in programming and I have a lot to learn. Thanks
really cool, I like it, man
is there a way to add more selections
You can edit the autodesk model and add another layer. Simple make the tower longer, or make it wider. Your choice.
hey vsauce micheal here
it was so funny when two packs of tea fell I THOUGHT THIS WAS PROFESANAL LOLOLOLOLLOLOLOLOL
Hey, Vsauce, Michael here
Hey. What Software do you use for the 3d model?
When does the laughing stop?
hi, I love your vendo but can you make an upgrade? Like instead of using single coinslot.... can you do a Multi-Coinslot like can read different kind of coins... thank you and more power
I dont think i will be building that, but multi coin mechanism tutorials are on adafruit.com website
00:01 "Hey Vsauce, Michael here"
Wow I really need to make this one for my office.
I got the electronics at hand. Just missing the laser cut files.
Does anyone have that? Unfortunately I live halfway around the world and can't purchase it
Awesome fella, do you have any plans of this design?
Where did you buy the servomotors? And the other components? I've seen in you webpage there's a summary about the elements you used but not specified where did you buy them. Could you tell me, please? It's for a project.
they are common parts available in many places. start with adafruit or sparkfun
Sir Ryan Bates, will the machine still work even without the logic converter? we will not use the LCD screen for the time being.
I subscribed to all of your videos
I love this video so much. Thank you so much
Is the servo a 360 degree or a continous rotation.?
If I useMG996R would it be the same?
how do you make it
What servo motors did you use?
A continuous rotation type or one that spins 160 degrees
Hello, it will be that you can put the link again is that it no longer lets it open.
sorry,. fixed (github.com/retrobuiltRyan/Venduino)
have you paced any ICs on protoshield board??? if yes, which one??
if i had to use a sensor to detect which coins are fake..which sensor would you recommend
you could have used a coin acceptor so that it will work more and will never gets stuck and you wont be able to use other coins
I like!
Excuse me
It has provided 3D drawing it?
Thanks!
What's the circuit for shaking and falling teas?
what is the format of the laser cut wood body
Do you think this would work with thoes dirt cheap motors or not strong enough?
where can the graph be found at for the nokia 5110 lcd screen?
How would you add an actual coin acceptor andnconnect it to the arduino?
(inputPULLUP, pin#) this pin goes to coin accepter. other side of coin accepter goes to ground
Awesome. what software you use for 3D design?
you could probably do this in autodesk or solidworks
and the Nokia in which it will be used?
Where do you get those wood pieces from?? Please reply
Judging by the material he used and how they look burnt on the sides, it looks like he laser cut them himself.
Thanks so much for making this video 👍
My pleasure!
What's the servo's references that u used ?
I have mg90s servo motor Servo Motor Towerpro (360) 2.2 kg.cm Metal Gears "MG90S" .. is it continuous rotation ?
Hi, it's an excellent project.
And I wanted to know if you can give me the circuit plan or where I can get it
Thanks
Could you send me the 3D file for Venduino V1?
Because for some reason when I try to convert the file into 123design it wont work for me.
Hi,
May you send the size and measurement of cardboard or mdf sheet so that I can cut it.
Would a Hall effect sensor work for the quarter?
no
how to make dispenser coil ?
bend a wire coat hanger around a broom stick.
How to buy It?
it's a open source project now.
What coding software is required for this?
python - Micro python
He said it was simple?
where I can I buy kit ? cuz I went on the site and it wouldn't let me order
Do you sell this complete product?
What is the value of the product?
I Love the machine!😍😍
sir can you convert it into I2C led 16x2 display thank you in advance... I just want to use it on my project
what do you use to lasercut the wood?
Can you post the PDF you used to do it
where go to shop the materials?
How to change the price of the items ?
is there no v1 coding that you can open in ide
Where can I get the codes?
How much the wooden box?
I love you so much, you save my life. Thankssss
Any idea what the total cost to make?
Спасибо, Абу!
Hey Ryan I am getting error codes from the coding as I am unsure of what libraries to use? Cheers
the error messages will identify what libraries you are missing. follow the links in the description, details on the libraries are there.
Dang this is cool
What are the measures please
Hey. You got measurements?
you look like Michael from Vsause lmao
Don´t work! I can´t configure the 74HC4050N Logic Level converter, the LCD It does not turn on.
That. Is. AMAZING
Nice Man,schematic :P and code
Can you use an MG995, 12 kg 360 degrees? And will the code still be the same?
you can use the MG995, not sure if the code will be 1:1.
Hmm. Yeah, kinda see that the motor might need a different code and values. But will the other code still work like the buttons? @RetroBuiltGames
button section of code is independent of what motors you use
Good work..^^
Can you charge led5110 ,i just have 1602_12c LEd can use thank you...
Hey...can u you give me details for the this in breif..
Do you sell physical kits? I visited your website but couldn't find the price.
I do. Use a desktop browser or request desktop site
www.retrobuiltgames.com/diy-kits-shop/venduino/
this guys knows
how long time will be used when no based student make that machine
Hey Vsauce!! ... Ryan here ...
Excuse me could you pass me the diagram I use in Arduino?
nao quero a maquina apenas o sistema configuradado. ou passo a passo como se faz
0.37 what software do you use?
inkscape for drawing.
@@RetroBuiltGames thanks sir
You are Flash ! So fast!
Do you sell kits
what is the name software
can i use rfid card instead of insert coins ? and if possible what would be the new schematic and code ? :)
it is possible.
do you have a copy of the 3D model and the arduino code I could have
go to the website in the description it has everything
can you please add the measurements