I just found your new set of "new" videos. I had watched all the older ones at least three times. It's lovely to see fresh new videos. Thank you, Jim Tree.
I really enjoy watching your videos in the Rope Access area. I look forward to new products from Petzl in the coming year. Kind regards from Germany near Cologne and stay healthy.
Hello from Italy. thanks for the great videos you make, I learned a lot of useful tips. Could I have some advice on anchors for double rope access? A - on a metal structure with L-shaped upright (10cmx10cm) what do you recommend? 1-two WIRE STROP petzl (steel rope) 2- two CONNEXION FIXE + PROTECT or two ANNEU + PROTEC B - on a "naked" pole with guided ascent heater how can I anchor myself to the pole? two CONNEXION FIXE + PROTECT or two ANNEU + PROTEC wrapped 2 times so as not to slip I have not seen anchors to be used on metal structures with sharp corners/edges but only on round structures C - One last question, after installing a wall anchor (COEUR BOLT PETZL) you do an extraction test right? How many kN should the test be performed to deem a reliable anchorage? if at 15kN it tears I have to try to 6kN or 10kN or 14kN ? Thanks in advance and good luck with your work
Hello there, thank you for the excellent training videos. How can I buy the Taz 3 Lov descender? I'm in the US and have not found a company that sells it? Thank you, Jim.
Hello again, I was wondering if there's a specific reason why screw gate biners are used instead of locking steel biners? Is there a rule about this? It seems auto-locking carabiners would be faster and less bother about the gates being screwed closed and opened over and over? Just a question. Thank you, I really like your videos, Jim.
I love your channel. so I would like to add Korean captions on your videos, but your channel does not allow(no permission). If you set to add the captions, I would love to.
When doing the rescue, instead of removing his ID from the rope, can you just transfer it onto your harness and descend using two IDS rather than removing it completely?
On the “passing re anchor”, I noticed he didn’t have 2 full points of contact when descending. Am I wrong? I saw he had 2 back ups and his chest kroll, that’s it. I feel like that would be a hard discrepancy. I’m just a new level one so I don’t know.
Hello i have not long got my level one and i'm looking to find a job where i can use it but no one same to be up for takeing me on do any one no of any one who would give me a go i'm from just out side of Edinburgh
Petzl en sueur lors du changement de corde ... passer d'un descendeur au croll sans utiliser un deuxième bloqueur... les bloquer s'utilise toujour par deux il ne faut jamais être sur un seul bloqueur !
Hi, I love your videos. A guick question. Horizontal aid, at 6.00 minutes sharp, you connect your short Cow'sTail to the ancor. If your short and long C.T.'s shared figure of 8 on your D ring fails, would you not just hang on your 2. C.T., on one point only? My L3 says he would fail me on the exam if I did it that way, without an independent third C.T., since I'm no longer attached to two independent anchors. Please correct me if I'm wrong. Thanks, Laz.
Hi Laszlo. If you cut a rope, you fall and end up on one point of attachment. This is the point of the redundancy in the system, I:E 2 points. So if your cowstail fails the other one will catch you. If you look at this set up which we use, you have cut 2 strands of rope for the system to fail. Which would be the same as cutting both working lines, I:E no back up. You always need to look at the system and think if this point fails what catches me. If this answer is another connection then this is acceptable. We only need 2 points of attchment not 3. Hope this makes sense. Cheers.
you stayed :( 04:13 and 11:31 sıngle point - backup first / 17:05 not connect cow tail and not knot-------- watch carefully------------------- ruclips.net/video/N5E3qXuQRf8/видео.html
I just found your new set of "new" videos. I had watched all the older ones at least three times. It's lovely to see fresh new videos. Thank you, Jim Tree.
Im about to undertake IRATA LVL 1 for the first time. Thankyou so much for this Video, no doubt ill watch it 100 times before may 16
уже шесть лет успешно работаю по гайдам с этого канала :)
An amazing video! I've never seen a such instructive one like that. Congrats and thanks for the class!
love the climbing wall in the back ground. Great videos, thanks for the info!
I really enjoy watching your videos in the Rope Access area. I look forward to new products from Petzl in the coming year. Kind regards from Germany near Cologne and stay healthy.
It is handy video Thank You for refreshment.
Love these videos, keeps the rust of til the next job, and helps with the sanity too...
Thank you! Please, make this kinde of video for L3
Hello from Italy. thanks for the great videos you make, I learned a lot of useful tips.
Could I have some advice on anchors for double rope access?
A - on a metal structure with L-shaped upright (10cmx10cm) what do you recommend?
1-two WIRE STROP petzl (steel rope)
2- two CONNEXION FIXE + PROTECT or two ANNEU + PROTEC
B - on a "naked" pole with guided ascent heater how can I anchor myself to the pole?
two CONNEXION FIXE + PROTECT or two ANNEU + PROTEC
wrapped 2 times so as not to slip
I have not seen anchors to be used on metal structures with sharp corners/edges but only on round structures
C - One last question, after installing a wall anchor (COEUR BOLT PETZL) you do an extraction test right? How many kN should the test be performed to deem a reliable anchorage?
if at 15kN it tears I have to try to
6kN or
10kN or
14kN ?
Thanks in advance and good luck with your work
Good Video. Good Job done.
Nice video, going in for second attempt for level 1 and aid climb is a killer for me!
Thank you sir ! we want this kind of level 2 video sir
Nice Vdeo learn a lot here.🙏❤️
Best training centre about 👌
Lovely refresher, can we get a CD plate for level 1 to 3 ?
very nice,good pratice
Hello there, thank you for the excellent training videos. How can I buy the Taz 3 Lov descender? I'm in the US and have not found a company that sells it? Thank you, Jim.
Thanks for your update
Hello again, I was wondering if there's a specific reason why screw gate biners are used instead of locking steel biners?
Is there a rule about this? It seems auto-locking carabiners would be faster and less bother about the gates being screwed
closed and opened over and over? Just a question. Thank you, I really like your videos, Jim.
I love your channel. so I would like to add Korean captions on your videos, but your channel does not allow(no permission). If you set to add the captions, I would love to.
When doing the rescue, instead of removing his ID from the rope, can you just transfer it onto your harness and descend using two IDS rather than removing it completely?
that used to be taught a few years back when i done my level 1
On the “passing re anchor”, I noticed he didn’t have 2 full points of contact when descending. Am I wrong? I saw he had 2 back ups and his chest kroll, that’s it. I feel like that would be a hard discrepancy. I’m just a new level one so I don’t know.
Just thought the same!
Where can I get the rope and other device to buy
Sir how to join this cours? Like very much.
How do you feel about the way the Astro waist D ring sits against the croll when both are loaded?
Plz send me level 3 more information
How hard is it to pass the Level 1 rope access exam?
salut j aimerais me forme en cordiste svp le cour de la formation je peu prévoir combien pour la formation
What job is this training for?
Rope acess
Hello i have not long got my level one and i'm looking to find a job where i can use it but no one same to be up for takeing me on do any one no of any one who would give me a go i'm from just out side of Edinburgh
What is the name of the second backup device? The silver/grey one.
That would be a Stec Duck-R. Handy little device. 👍
@@mattiaslefrell9235 thank you, found it!
Iratta licence എടുത്തിട്ട് 1 കൊല്ലംആയി ഇതുവരെ ജോലിയൊന്നും കിട്ടീട്ടില്ല any vecency undo? Level 1..
Petzl en sueur lors du changement de corde ... passer d'un descendeur au croll sans utiliser un deuxième bloqueur... les bloquer s'utilise toujour par deux il ne faut jamais être sur un seul bloqueur !
L2??
How old do you have to be to a irata qualification?
@A R Okay thank you
What about a max age? Say 35 with no experience, but lots of video knowledge?
Hi, I love your videos. A guick question. Horizontal aid, at 6.00 minutes sharp, you connect your short Cow'sTail to the ancor. If your short and long C.T.'s shared figure of 8 on your D ring fails, would you not just hang on your 2. C.T., on one point only? My L3 says he would fail me on the exam if I did it that way, without an independent third C.T., since I'm no longer attached to two independent anchors. Please correct me if I'm wrong. Thanks, Laz.
Hi Laszlo. If you cut a rope, you fall and end up on one point of attachment. This is the point of the redundancy in the system, I:E 2 points. So if your cowstail fails the other one will catch you. If you look at this set up which we use, you have cut 2 strands of rope for the system to fail. Which would be the same as cutting both working lines, I:E no back up. You always need to look at the system and think if this point fails what catches me. If this answer is another connection then this is acceptable.
We only need 2 points of attchment not 3.
Hope this makes sense.
Cheers.
👍🧗♂️
Do it the Fred Dibnah way no need for all this
over priced safety junk .Flat cap and a woodbine and yer good to go 😂
you stayed :( 04:13 and 11:31 sıngle point - backup first / 17:05 not connect cow tail and not knot--------
watch carefully------------------- ruclips.net/video/N5E3qXuQRf8/видео.html
I’ll be l2 dual soon.