@@trp225 The lateness is most likely due to me taking longer than usual to depart from previous stations! I’ve been able to keep to time whilst driving the services shown in this video (using the provided technique) in the past!
Jere in Belgium we get a little help from station announcement sign along the route thats mostly the point you must aply your brakes to stop at the next station
It took me a while to get the braking down and I still mess it up occasionally. Like you say 30mph platform entry speed and avoiding B3 unless really required is a solid technique.
I have been wondering about this for quite a while. In the UK, is there really no designated sign informing you of an upcoming station? Saw the other comment mention a sign in Belgium, these signs also exist in all of Eastern Europe (or East of the iron curtain) and Germany. A white board with 3 diagonal black stripes, always placed a fixed distance away from a "platform stopping point sign" (or platform end, etc.) depending on the max allowed line speed.
@@slovak_eagle Drivers in the UK rely on route knowledge when it comes to braking points for stations! They tend to look out for trackside landmarks e.g. signals, bridges, speed boards, bends! If the speed limit is low enough however, they can simply use line of sight!
@@VirtualRailDriver I see. Very intresting. I guess there is no real need for such signs unlike here. The type of train can vary a lot, even on the same service. It can be loco hauled, dmu, emu. Not to mention the amount of cars and general weight changes as well. From what I have seen, loco hauled trains are very rare in the UK now. I guess route knowledge coupled with driving experience of a specific unit gets rid of the variety I assume, therefore operating a train is pretty consistent.
@@slovak_eagle Absolutely correct! Each passenger service in the UK tends to be worked by the same model of train everyday! The number of carriages normally stays the same but can sometimes change!
ive been playing train sim world and train sim classic for quite a while and i would say ive mastered driving i stop at most car markers. all i need to do is route learn and not throw my passengers across when i go to stop as i usually go into step 3 which isnt the best to use tho come to a complete stop
I tend to leave step 3 alone and only use it as a back-up! Step 2 for the initial brake application then jump between off/release, steps 1 and 2 where necessary! Always aim to come to a stand in step 1 for passenger comfort!
Thank you brother, been trying to pick up bits and pieces to improve my technique.
@@MelbourneTrainGuy You’re welcome! Glad you found this helpful and thank you for your comment!
Thanks Mate, great video, Hopefully my stops will improve after watching it...
@@JoeDelaney64 Thanks for the support! Really means a lot!!
Awesome, helped me out.. I always brake too early, and go too slowly, crawling into the station .
@@Wolf-6567 I do that every now and then! Especially on routes I’m not familiar with! Also, thanks for the comment!
how does one Accurately Stop At Stations and be on time? Because I noticed you are late ( ex 12:48 ). Please and thank you
@@trp225 The lateness is most likely due to me taking longer than usual to depart from previous stations! I’ve been able to keep to time whilst driving the services shown in this video (using the provided technique) in the past!
Jere in Belgium we get a little help from station announcement sign along the route thats mostly the point you must aply your brakes to stop at the next station
Sounds really useful!!
@VirtualRailDriver sometime you need to brake befor it depending on the train type
Hoe zien ze eruit ?
@YourCopilotWT like a sign whit the shortened name of the op comming station like for brugge is brug or antwerp is antw etc
@@cubethecuber659 Ahh fair enough!
It took me a while to get the braking down and I still mess it up occasionally. Like you say 30mph platform entry speed and avoiding B3 unless really required is a solid technique.
@@MrScootmcg Indeed! And I too mess up every now and then! Especially on the routes that I don’t drive on very often!
I have been wondering about this for quite a while. In the UK, is there really no designated sign informing you of an upcoming station?
Saw the other comment mention a sign in Belgium, these signs also exist in all of Eastern Europe (or East of the iron curtain) and Germany. A white board with 3 diagonal black stripes, always placed a fixed distance away from a "platform stopping point sign" (or platform end, etc.) depending on the max allowed line speed.
@@slovak_eagle Drivers in the UK rely on route knowledge when it comes to braking points for stations! They tend to look out for trackside landmarks e.g. signals, bridges, speed boards, bends!
If the speed limit is low enough however, they can simply use line of sight!
@@VirtualRailDriver
I see. Very intresting.
I guess there is no real need for such signs unlike here. The type of train can vary a lot, even on the same service. It can be loco hauled, dmu, emu. Not to mention the amount of cars and general weight changes as well. From what I have seen, loco hauled trains are very rare in the UK now. I guess route knowledge coupled with driving experience of a specific unit gets rid of the variety I assume, therefore operating a train is pretty consistent.
@@slovak_eagle Absolutely correct! Each passenger service in the UK tends to be worked by the same model of train everyday! The number of carriages normally stays the same but can sometimes change!
Nice, good info
@@helll0ween Thanks!!
ive been playing train sim world and train sim classic for quite a while and i would say ive mastered driving i stop at most car markers. all i need to do is route learn and not throw my passengers across when i go to stop as i usually go into step 3 which isnt the best to use tho come to a complete stop
I tend to leave step 3 alone and only use it as a back-up! Step 2 for the initial brake application then jump between off/release, steps 1 and 2 where necessary! Always aim to come to a stand in step 1 for passenger comfort!
I normally overshoot by like 4 or 5yds lol
@@Thundxr1 Happens to me every now and then 😂😂!
Sometimes I always miss the station
@@deaconjohn6838 Practice makes perfect! Always establish a good braking point and entry speed for each station you intend to stop at!
So much ado without nothing here.
@@Carl-tc2yb You think??
@@VirtualRailDriver well you say without further ado quite a lot.
@@Carl-tc2ybAhhh lool! I have a habit of saying words and phrases without actually knowing what they mean! It can be quite embarrassing sometimes!
you clear are a bot and not seen this og drive your clear u cant drive so GG
@@AustraliaWorldwide Lool! I’m far from a bot! Deffo room for improvement though!