Hi! I am trying to find information about the CO2 pressure reducer type. Is it dual-stage and prevents pressure bumps when no more liquid CO2 is left in the bottle?
Hello i just bought that reductor. Can you advise how to set pressure of bottle? Make the same as video about 60 bar or turn maximum minus half turn. Thank you in advance.
Hello, turn the adjustment knob until the pressure regulator shows the required pressure. Then open the fine control valve on the pressure regulator until bubbles rise in the diffuser. Adjust the amount of bubbles to a low amount in the beginning. The amountcan be increased after several hours until the desired CO2 content has been achieved.
Hello, the number is 7375578. Link: eheim.com/de_DE/ersatzteile/technik/co2/co2set-inkl.-nachtabschaltung/dichtungsring-fuer-druckminderer-6063050-2-stueck
War mit dem 400 Set nicht zufrieden. Die Nachtschaltung funktionierte, aber am nächsten Tag, selbst nach 4 Stunden erneutem einfahren, musste man die Anlage neu einrichten, da die Blasen von 85/min auf 20/min sank. Des Weiteren schaffte die Anlage maximal 90 Blasen pro Minute (Einstellknopf maximal offen - 1,8 Bar und Feinventil soweit offen, sodass nichts entschwindet), was viel zu wenig ist. Entwendet war was Schrott oder die Anlage besitzt, sowohl beim Preis als auch beim Namen, eine 0 zu viel. Selbstverständlich war alles dicht und wurde mit Spülmittelwasser kontrolliert, da ich es selbst nicht glauben konnte.
It's all written in several languagues in the manual delivered with the set. If you read it then the video supports you and I'm sure you'll make it right! I installed the CO2 Set 400 today in my new aquarium and I'm very hopeful that all will work fine. While turning the valves the visable results sometimes seems a bit delayed, so I often had to re-turn again in both directions (open and close). But finally it is a quite simple set easy to use.
Also den druckminderer und co2 dauertest würde ich nochmals überarbeiten, dar diese nicht modern und gut aussehen. Zudem hoffe ich, dass das system nicht so teuer ist wie alle anderen produkte von euch.
I use EHEIM products and I am very satisfied with the products. Greetings from Poland.
Thank you
Cześć kupiłem taki reduktor podpowiesz jak ustawić ciśnienie robocze butli przekręcić do końca minus pół obrotu czy tak jak na filmie w okolice 60bar?
Sehr anschaulich und verständlich präsentiert.
Danke!
Hi! I am trying to find information about the CO2 pressure reducer type. Is it dual-stage and prevents pressure bumps when no more liquid CO2 is left in the bottle?
Hello. I set this system up yesterday. Yesterday the left gauge red 70, today is says 80? Is something wrong or is this okay?
I cannot find any details or information about the readings. It only tells you how to set up and turn it on :)
Does the drop checler work as a non return valve?
Würde mich auch interessieren
@@nouseforaname9165 Hallo, bei den Sets 200, 400 und 600 ist bereits ein Rückschlagventil im CO2-Diffusor oder Blasenzähler integriert.
Kann man an das Eheim co2 400 Set auch eine 2 kg Flasche anschrauben? Oder geht da nur die 500er?
Hallo, es kann auch eine 2 kg Flasche angeschraubt werden.
what is the different set 400 with 600?
Man hätte vielleicht reden können damit man alles genau versteht wie sie alles einstellen
Ich hoffe sie werden sich irgendwann mal eine Scheibe von Dennerle, JBL und Sera abschneiden.
Hello i just bought that reductor. Can you advise how to set pressure of bottle? Make the same as video about 60 bar or turn maximum minus half turn. Thank you in advance.
Hello, turn the adjustment knob until the pressure regulator shows the required pressure. Then open the fine control valve on the pressure regulator until bubbles rise in the diffuser. Adjust the amount of bubbles to a low amount in the beginning. The amountcan be increased after several hours until the desired CO2 content has been achieved.
@@eheim thank you
Muito bom. Tem algum vídeo de instalação do Eheim pHcontrol+e?
Hello could you please send catalogue number for oring for this reductor I would like to buy andchange it but not sure which one is correct. Thank you
Hello, the number is 7375578. Link: eheim.com/de_DE/ersatzteile/technik/co2/co2set-inkl.-nachtabschaltung/dichtungsring-fuer-druckminderer-6063050-2-stueck
War mit dem 400 Set nicht zufrieden. Die Nachtschaltung funktionierte, aber am nächsten Tag, selbst nach 4 Stunden erneutem einfahren, musste man die Anlage neu einrichten, da die Blasen von 85/min auf 20/min sank. Des Weiteren schaffte die Anlage maximal 90 Blasen pro Minute (Einstellknopf maximal offen - 1,8 Bar und Feinventil soweit offen, sodass nichts entschwindet), was viel zu wenig ist. Entwendet war was Schrott oder die Anlage besitzt, sowohl beim Preis als auch beim Namen, eine 0 zu viel. Selbstverständlich war alles dicht und wurde mit Spülmittelwasser kontrolliert, da ich es selbst nicht glauben konnte.
I still didn’t get it because nobody talked and i don’t know what to do
Hello, please contact our customer service. The email is eheim.service@eheim.com
It's all written in several languagues in the manual delivered with the set.
If you read it then the video supports you and I'm sure you'll make it right!
I installed the CO2 Set 400 today in my new aquarium and I'm very hopeful that all will work fine. While turning the valves the visable results sometimes seems a bit delayed, so I often had to re-turn again in both directions (open and close). But finally it is a quite simple set easy to use.
Also den druckminderer und co2 dauertest würde ich nochmals überarbeiten, dar diese nicht modern und gut aussehen. Zudem hoffe ich, dass das system nicht so teuer ist wie alle anderen produkte von euch.
Danke für das Feedback