Amazing Accessory For Laser Engraver- ATOMSTACK F3 Matrix Cutting Panel 460x425mm
HTML-код
- Опубликовано: 11 мар 2023
- Amazing Accessory For Laser Engraver- ATOMSTACK F3 Matrix Cutting Panel
Atomstack F3 Working Table Panel :bit.ly/3l5iXoF
Official AtomStack Store: bit.ly/3LhIkht
ATOMSTACK Honeycomb Working Table : bit.ly/3ZZ35mr
Atomstack Maker Accessories for Laser Machine : bit.ly/3mIleGK
Official Atomstack Website - Laser Engraver & Cutter: bit.ly/3JiK87E
The Atomstack F3 matrix working panel Set features a new generation of innovative design to replace traditional honeycomb panels. It features matrix design elements that are spliced together and removable for easy cleaning of oil and impurities. It features a one-piece design with overhanging matrix metal strips arranged sequentially, eliminating the need to place metal plates at the bottom. Atomstack F3 has a large protective area of 460*425mm to protect your workbench. Infinite extension design: Each Atomstack F3 will come with a connector in the package, and you can purchase two F3s to quickly assemble an extended Working Panel Set with a protective area of 460*850mm. It helps the laser to achieve a better cutting effect. The Atomstack F3 is very easy to clean and always guarantees the best cutting results. It can adapt to all brands of laser engraving machines in the market, such as: Ortur, NEJE, xTool, Sculpfun, etc.
AtomstackModel: F3
Material: Aluminum alloy
Protection size: 460*425mm
Two F3 splicing area: 460*850mm
Storage size: 470*140*115mm
Net Weight: 1900g
Official AtomStack:
Facebook: / atomstack.official
RUclips: / @atomstack.official
Instagram: atomstack.o... Наука
My review of the Atomstack F3
"T" nuts too small for slots can pop out and do when tightening.
Long screws and wingnuts hit my Creality Laser arm interfering with it.
Every other "Toothed" arm is lower than the previous one, material does not even touch them, so what use are they?
Teeth are slightly rounded so it makes the surface quite slippery for the material.
Last the surface is not magnetic.
Unfortunate that it's not available in size 850 x 800 mm. It would be so useful with the extension E85
It’s non-magnetic so a huge no-no for me, those brackets only work well in very specific situations.
Atomstack? Looks like a xtool laser to me.
Atomstack F3 Matrix Detachable Working Panel - It can adapt to all brands of laser engraving machines in the market, such as: Ortur, NEJE, xTool, Sculpfun, etc.
@@kukomio thank you for your reply. I understand that it can be used on many lasers. I have a honeycomb now, but i do like the F3 matrix. It looks more like the type of bed that is often used with plasma cutters. Nice modular design. I was just surprised to see a Atomstack F3 panel being demonstrated with a red xtool laser! Greetings from the Netherlands, Ron