#202
HTML-код
- Опубликовано: 30 сен 2024
- [Builder's view]HASEGAWA YAMAHA'89YZR500 LUCKY STRIKE is in progress.
Fitting Rainey's figure to the YZR500.
Even though the figure has been assembled tentatively many times, there are some parts that are inevitably out of alignment, and it is difficult to create figures with such a combination. The only way to proceed is to make fine adjustments each time.
Notice: I made some goods. Sold at SUZURI.
suzuri.jp/nand...
The photos of the finished product are summarized here plamodel.info
Please follow me on Twitter.
/ nandemo_seisaku
Various photos are published irregularly on Instagram.
Instagram / nandemo_plamo
Facebook page / nandemoseisaku
Web site nandemo-seisak...
Contact info@nandemo-seisaku.com
Absolutely Astonishing work. You are one very talented craftsman. Beautiful!
Thank you!!😊
うわ〜細かい調整が大変…!ヘルメットシールド開閉ギミックなんていつの間にw
シールドはもう少しスモークのものに変更します。
すると顔が全然見えないのでついでに開くようにしました。
In case you are excited I can understand. It’s an outstanding build. 👍
Thank you!!😊
コレは大変ですね、マシンの個性とは全く別次元のライダーの個性、しかしコレを疎かにすると別物になってしまうし、フォームはいい加減に出来ないし、今作品の最難関。
まだ着色も有る、私ならノイローゼになりそう。
自分の持っているイメージを壊さないようにするのが難しいです。
塗装も大変そう……😅
Superbe .quand il sera finie il va être magnifique.
Merci! À la prochaine!
Tout simplement incroyable très bon travail
Merci beaucoup.
Always « extraordinaire » in français 🇫🇷
C'est un beau compliment pour moi. Merci beaucoup.
You better win some awards for this one my man....
Please give me some prize 😃
この段階では、エディーにも見えそうな、やっぱり、レイニー!
ウェインとワインは同じつづりだけど、アメリカ読みかオーストラリア読みの違いというのが、この時代のあるあるでしたね。
ちょっとエディーっぽい気もするのですが😅身長が結構違うのです
Thanks for doing some very inspirational Build's Kenji they are all exceptional
Thanks😊
As I watch you assemble the bike and sculpt the figure it never occurred to me that the clay, being more "alive", would react differently to heat and humidity than the plastic. How did you compensate for shrinkage and still maintain scale? Amazing work.
Well done
Actually, the shrinkage of clay can only be judged by experience, so there are some unexpected things happening.
There is no choice but to complete it while correcting the balance well😅
私見ですが、フィギュアを作るのは技術だけではなく、感性、センスがなければ不可能だと思っております。無機物は経験値が上がればそれなりに上達しますが(私は無理ですが)無から有への具現化は才能によるものでしょうね。素晴らしいです!
ありがとうございます😃
でも私も最初からうまく出来たわけではないのでやっぱり経験値大事です😃
まさにこのレイニーを鈴鹿で見てました。
涙が出そうです。
私も当時のレイニーを鈴鹿で見ました。ノスタルジーで一杯です。
ケニーの目線は、コーナー出口を向いてるのでしょうか? かっちょいい
コーナーはS字の途中なので、正面やや左に近いところを見ようかな……
(念のためですが「レイニー」です)
@@kenji-plasticmodels 失礼しましたレイニーですよね!
教えて下さいレイニと言うフィギアを探しましたが見つかりません購入先と名前を教えて下さい私もバイクプラモデルが好きで3-4日に購入してます
動画内にあるように、フィギュアは粘土で作っています。
Bravo
Thanks!
お疲れ様です。
メットのインナー調整、大変そうですね。
手首は結構な外科手術、エグいです。😅
どんどんレイニーに見えてきます。
完成が楽しみですね。
次回も楽しみにしております。😊
ありがとうございます😃
連続して作らないので(スペンサーから時間が経っているため)作り方を忘れてしまってるんですね。だから苦労しています😅
妥協しつつ頑張ります。
Hi Kenji, I wonder which is harder, the model itself, or getting the figure onto the model. Great work, and I know it will turn out awesome!
Hi Brian.
Getting the figure onto the model is the hardest part.
because it's complicated to put it together, and there are many things that are out of alignment😅
Thanks!
陶芸家 兼 外科医師 みたいな繊細極まりない造形とフィッティング作業。レイニーさんが見たらきっと大感激でしょうね^^
ありがとうございます。
本人に見てもらいたいですね😊
レイニーに見えてくる🤣
レイニーその者です!
ってか、このフィギュア3Dプリンター出力で販売して欲しいです😄
ありがとうございます😊
3Dプリンターにするにはデータを作らないといけないので今のところ無理ですね😅
Probablement la partie la plus délicate ! Ajuster le pilote sur sa machine !
Mais votre minutie et votre patience font que le résultat sera magnifique !
Prenez soin de vous et à bientôt pour la suite.
Merci beaucoup😊
Remarkable skill to create an amazing model!
Thank you!!
wonder if we're able to make the figure out of mannequin and cover it with some sort of rubber skin?
Please try it!
Unless you try something, you won't know😃
@@kenji-plasticmodels i will if i have the money and time for it but unfortunately i'm not capable :(
Very impressive 🤩
Thanks!!