Thanks! This was the solution to my problem, I used two times the usual lora loader chained, and it slowed down the generation 10x or more, literally, a pic that normally takes 45 sec could take 10 minutes. This makes it work juat as fast as using just one.
in the video it is shown that the loras are combined, but I would like to know how use multiple characters separated, for example having a coffee together or something like that.
For now it is not possible for ai to separate loras. It always combines all active loras together. But you can use a trick. first use one lora and generate an image (for example with two charachters. then fix the seed and change lora and set second lora. now you have tow images. put images on top of each other in photoshop and mask one of faces.
@@Jockerai I do exactly as you have the video and put it where you have shown in the video. Thank you so much for your work. You are the best in this field that I have seen. My main problem is that I have macOS m2 silicon? and you have windows. But I am finding solutions to the problems.
I have a favour to ask of you. I've seen all your videos and where you can train your LoRA. However, I do not have the ability to pay for this service right now. Maybe you can tell me where I can read or see how to make a photo with the face I want. Thank you so much for your hard work)
yes it is possible but not at one try generating. you generate with one lora once and next time fix seed and use another lora then in Photoshop mask one of faces and replace it.
But, in this case, can one generate images of both girls, for example walking together, taking a coffee, one smiling the other upset, etc? Is one thing I would like to do
@@adrianmunevar654 it is a great question that I'm about to make post for it😁 It is possible but it's a little tricky. Because when you use two personal lora at the same time, even you write for two person in prompt, both faces will be combined not separated.
@@adrianmunevar654 the solution is you generate with one lora once and next time fix seed and use another lora then in Photoshop mask one of faces and replace it.
Must be a way to do it inside of ComfyUI, maybe a controlnet or/and ipadapter. If it's possible in SD it must be possible with Flux. I downloaded a workflow from civitai, it mixes sdxl with Flux, the results are amazing but I couldn't use it yet because ComfyUI goes to debug mode and I'm not an expert at all. Do you want the link and try it?
А в чем прикол-то? В фордже ты просто кидаешь картинку на стол, закрываешь маской то что хочешь изменить и готово. Зачем все эти ноды? Только лишняя возня, ИМХО
Can we use this GGUF workflow for the regular flux1-dev.safetensors model or do we have to use the GGUF models with this workflow? I switched the nodes so I can use the regular flux1-dev.safetensors and the t5xxl_fp16.safetensors clip but my system keeps crashing when using this workflow. Can you show us how to use the regular models if we have more powerful computers?
@@adapt-or-die-trying yes you can easily use flux.dev main model but it needs a strong system and high VRam to work. If it crashes for you, it means you can't use the main models on your current system and need a more powerful one
@@Jockerai I'm using an RTX A5000 with 24 GB of VRAM and 25 GB of RAM and 12vCPU, do I really need more power than that just to run the main models? How much would you say I need then?
click the link below to stay update with latest tutorial about Ai 👇🏻 :
www.youtube.com/@Jockerai?sub_confirmation=1
I was looking for this and all of a sudden I found your video amazing tutorial thank you bro😍💚
you're welcome my friend😉✨
Thanks! This was the solution to my problem, I used two times the usual lora loader chained, and it slowed down the generation 10x or more, literally, a pic that normally takes 45 sec could take 10 minutes. This makes it work juat as fast as using just one.
@@ChristerHolmMusic happy to here that 🤩. You're welcome bro stay tuned
in the video it is shown that the loras are combined, but I would like to know how use multiple characters separated, for example having a coffee together or something like that.
For now it is not possible for ai to separate loras. It always combines all active loras together. But you can use a trick. first use one lora and generate an image (for example with two charachters. then fix the seed and change lora and set second lora. now you have tow images. put images on top of each other in photoshop and mask one of faces.
@@Jockerai How can I purchase the face swap workflow in this video?
thank you !finally!
@@mozzicvisuallab8427 you're welcome 😉❤️
I'm not getting LoRA's added, it's like it can't find where they lie. How do I fix this?
@@ДжониФэйл where did you put them in your system?
@@Jockerai I do exactly as you have the video and put it where you have shown in the video. Thank you so much for your work. You are the best in this field that I have seen. My main problem is that I have macOS m2 silicon? and you have windows. But I am finding solutions to the problems.
I have a favour to ask of you. I've seen all your videos and where you can train your LoRA. However, I do not have the ability to pay for this service right now. Maybe you can tell me where I can read or see how to make a photo with the face I want. Thank you so much for your hard work)
@@ДжониФэйл very good 👍🏻 you can also test PowerLoraLoader from Rgthree collection
@@ДжониФэйл thank you so much for your kind comment ✨🔥
good work sir!
you're welcome bro💚
If possible to use, multiple Lora model (without merging) on one image (two different character). If yes.. please upload the tutorial.. thank you..
yes it is possible but not at one try generating. you generate with one lora once and next time fix seed and use another lora then in Photoshop mask one of faces and replace it.
Perfect Dadash
@@Maxi.J. thank you dadash❤️
But, in this case, can one generate images of both girls, for example walking together, taking a coffee, one smiling the other upset, etc? Is one thing I would like to do
@@adrianmunevar654 it is a great question that I'm about to make post for it😁
It is possible but it's a little tricky. Because when you use two personal lora at the same time, even you write for two person in prompt, both faces will be combined not separated.
@@adrianmunevar654 the solution is you generate with one lora once and next time fix seed and use another lora then in Photoshop mask one of faces and replace it.
Must be a way to do it inside of ComfyUI, maybe a controlnet or/and ipadapter. If it's possible in SD it must be possible with Flux. I downloaded a workflow from civitai, it mixes sdxl with Flux, the results are amazing but I couldn't use it yet because ComfyUI goes to debug mode and I'm not an expert at all. Do you want the link and try it?
@@adrianmunevar654 yes sure send me the link please
@@Jockerai it looks like YT erased my reply, maybe for the link? Here it goes again in the next comment...
Hi can you create a tutorial for video to video using flux in comfy? thanks!
I have plans to do that but in future bro stay tuned
Something that comfyui lacks in a way to automatic load the tags and keywords from loras, that would help a lot.
👏🏻✨
For some reason i can’t see rgthree for install…
@@MDanielSavio update your comfyUi it will fix it
@@Jockerai I install via github finally, for some reasson i can’t see many nodes.
thanks for your video, it realy helt me a lots. let make video above controlnet with Flux GGUF,
You're welcome. I have already made one. Watch channel videos
WorkFlow link doesn't work.
@@AInfectados I checked it no issue. When you open the pink just click on downward arrow icon on top right of the screen
@@Jockerai i.imgur.com/noQmGdE.png
@@Jockerai i.imgur. com/noQmGdE.png
@@Jockerai I still can't see it, the page don't load, so i have no option.
Can you change to another shortener please?
@@AInfectados now check it I put the main link
pssssst buddy, your title says MULI-LoRa instead of MULTI
@@xaviere.3299 thank you buddy I fixed it😁
А в чем прикол-то? В фордже ты просто кидаешь картинку на стол, закрываешь маской то что хочешь изменить и готово. Зачем все эти ноды? Только лишняя возня, ИМХО
it's just up to anyone to choose what he or she prefer. I use ComfyUi, Forge even focus
Can we use this GGUF workflow for the regular flux1-dev.safetensors model or do we have to use the GGUF models with this workflow?
I switched the nodes so I can use the regular flux1-dev.safetensors and the t5xxl_fp16.safetensors clip but my system keeps crashing when using this workflow.
Can you show us how to use the regular models if we have more powerful computers?
@@adapt-or-die-trying yes you can easily use flux.dev main model but it needs a strong system and high VRam to work. If it crashes for you, it means you can't use the main models on your current system and need a more powerful one
@@Jockerai I'm using an RTX A5000 with 24 GB of VRAM and 25 GB of RAM and 12vCPU, do I really need more power than that just to run the main models? How much would you say I need then?
@@adapt-or-die-trying no it is enough. I have to see the full log error in your cmd. send it here please
junk to many missing files poorly design
@@gar-r3w3b what missing files?