Just wanted to come here to say I really respect the way you have answered all of these comments. Tons of super good info from someone who is clearly qualified :) I can't believe this is free!
Do you have gps on this bad boy? Im trying to get it since i lost my avata with death roll it fell put of the sky but im scared and spoiled by the gps of dji
I do not have GPS on this but it is possible to add it on. It would be helpful to have on for recovery in the case it is lost. I'm not 100% sure if it will have the same return to home features like in the DJI Mavic and Avata.
Thank you! It has taken many hours to get comfortable flying in this area and to understand what routes I would take. I'm sure you'll have very good videos soon with time!!
Thanks for the feedback. I had a 2 stop ND filter on there but didn't have the shutter angle manually set which probably gave it that choppy appearance. Agreed, the having the motion blur will provide a more natural aesthetic to the footage.
Can I use GEPRC naked GoPro in any other circumstances than for the drone flight? I'm asking because on their webpage, its says: "Please take off immediately after power supply to avoid burning the mainboard due to insufficient heat dissipation. When flying, it would bring enough cold air to cool down."
You can power the GoPro with the balance lead of a lipo battery. The Cinebot30 comes with two mounted to balance lead connectors for both 4s and 6s batteries. So the GoPro can be powered without being attached to the drone. The warning you mentioned would be if you are powering the GoPro from the mainboard. Hope that helps.
@@harrypotcha0283 Correct unless you connect the GoPro directly to a lipo battery balancer lead connector but it would be difficult to carry around and mount.
One of the biggest factors is line of site. If you have things such as buildings or rocks, there could be some obstruction with the signal depending on the size of the between the drone and the goggles/radio. It could also be the direction of the drone in relation to you goggles and radio. Sometimes if the drone is behind me, I will loose quiet a bit of signal strength in my goggles. Those are the two main factors to keep in mind.
This is great! Such a nice demonstration of what the drone can do. Really nice location too. I am hoping to buy a CB30 as my first quad for exactly this sort of thing. Do you have any signal issues flying that sort of range around the rocks, or is that solid? Wondering how far I will get practically. Thanks for posting.
Thank you! 🙏 As far as signal strength and penetrating rocks. It does fairly well if I'm within 500 meters. I usually climb in altitude in case I feel that I'm losing signal to regain line of sight . I'm using the vista air version of the cinebot paired with DJI FPV Goggles V2 and the FPV radio V2 which are both older compared to the current generation of controller/goggles. Range is fair within a mile line of sight.
You'll definitely get more flight time but you will also add more weight which may effect handling. Something to consider if you plan to fly aggressively.
Very nice flight and footage. Why does it look/feel like it's slowed down? Not pointing a finger or anything, just legit wondering, looks really cool either way.
I'm not flying aggressively and the footage is stabilized with Reelsteady which sometimes zooms in and out of frame. This may have an effect with how the speed looks.
hello nice video broo , can i know what is your setting for gopro ,nd filter and did you have gps on drone ? it would be helpful if you share because vid is beautiful an d
Thanks! The setting for the GoPro is protune enabled with a flat color profile. There is no in camera stabilization so that it can be stabilized in post by Reelsteady. You could also use the free stabilization software Gyroflow.
@@farisnazeri9841 in the GoPro menu, you go to Protune - Color and select flat. For the edit, I am using adobe premier. I'm not using any LUTs but I stretch the dynamic range in the histogram then increase the saturation and vibrance. I'll also adjust the color temperature as needed.
I do most of my flying in this area. Radio and google signal is fair behind most of rocks pillars and smaller valleys with some. However if there is a significant hill between me and the drone, the signal will drop significantly. It is tricky to see the difference in topography between what I see in the goggles and I am physically. Just an FYI, I'm using DJI FPV Goggles V2 and DJI FPV Controller mode 2.
It depends on the type of flying that you're doing. For slow flying, it is fine with wind speeds up to 10mph. There is a little bit of drift that has to be controlled. For fast freestyle flying, it does well up to 20mph winds and a little bit more effort is needed to handle the wind. I fly in Acro and took some time to get accustom to its behavior. Compared to a smaller drone, this does much better with the wind.
Bro i am newbie please tell me.. When i want to order cinebot 30 on geprc website there i can choose 4s or 6s version. If i choose 6s, i cant use 4?And if choose 4s, cant use 6s? Whats the difference between them and what would you recommend? Sorry not my native language, Thank you
Both battery types will have similar performance. You can not use a 6s battery on a 4s drone. The 6s battery uses a xt60 connection and the 4s battery uses a xt30 connection. The advantage of the 6s battery is lower power draw since there are 2 additional cells and will allow the battery have a longer life. I would say the advantage of the 4s battery is the lighter weight and price for battery. I use 4s batteries on my other cinelog but have replaced many of them because they seem to degrade faster with time. My recommendation would be to get the 6s version. I hope that helps.
Just wanted to come here to say I really respect the way you have answered all of these comments. Tons of super good info from someone who is clearly qualified :) I can't believe this is free!
Thanks! I appreciate it 🙏
Do you have gps on this bad boy? Im trying to get it since i lost my avata with death roll it fell put of the sky but im scared and spoiled by the gps of dji
I do not have GPS on this but it is possible to add it on. It would be helpful to have on for recovery in the case it is lost. I'm not 100% sure if it will have the same return to home features like in the DJI Mavic and Avata.
Beautiful flight 😍😍
Thank you!! 🙏🙏🙏
What an awesome video! great flying man, very smooth, and deliberate. I hope to make a video this good someday.
Thank you! It has taken many hours to get comfortable flying in this area and to understand what routes I would take. I'm sure you'll have very good videos soon with time!!
Great flight over an awesome location. Thinking of getting this cinebot 30. New sub from me.
Thank you for the Sub! The Cinebot is a great. Very capable for its size.
Very nice video, if i would add anything, i'll suggest you put an ND on the Gopro to creating some motion blur, your videos will look much smoother.
Thanks for the feedback. I had a 2 stop ND filter on there but didn't have the shutter angle manually set which probably gave it that choppy appearance. Agreed, the having the motion blur will provide a more natural aesthetic to the footage.
wow.very excellent ~ see you soon,😊
Thank you!! 🙏
Can I use GEPRC naked GoPro in any other circumstances than for the drone flight? I'm asking because on their webpage, its says: "Please take off immediately after power supply to avoid burning the mainboard due to insufficient heat dissipation. When flying, it would bring enough cold air to cool down."
You can power the GoPro with the balance lead of a lipo battery. The Cinebot30 comes with two mounted to balance lead connectors for both 4s and 6s batteries. So the GoPro can be powered without being attached to the drone. The warning you mentioned would be if you are powering the GoPro from the mainboard. Hope that helps.
@@tabangcora Oh now I get it. So basically it’s impossible to use Naked Go Pro apart from the drone, because of lack of battery.
@@harrypotcha0283 Correct unless you connect the GoPro directly to a lipo battery balancer lead connector but it would be difficult to carry around and mount.
great video!! can you tell me please why my cb30 only reaches 200 meters aprox?
One of the biggest factors is line of site. If you have things such as buildings or rocks, there could be some obstruction with the signal depending on the size of the between the drone and the goggles/radio. It could also be the direction of the drone in relation to you goggles and radio. Sometimes if the drone is behind me, I will loose quiet a bit of signal strength in my goggles. Those are the two main factors to keep in mind.
I'm using tattu R-line 6S 1200 mah 150c battery and only getting 3-4 mins. should i be using a different battery for better flight time?
I'm
The battery that you have should be fine. Some considerations would be how much wind that you're flying and how aggressively you're flying.
This is great! Such a nice demonstration of what the drone can do. Really nice location too. I am hoping to buy a CB30 as my first quad for exactly this sort of thing. Do you have any signal issues flying that sort of range around the rocks, or is that solid? Wondering how far I will get practically. Thanks for posting.
Thank you! 🙏 As far as signal strength and penetrating rocks. It does fairly well if I'm within 500 meters. I usually climb in altitude in case I feel that I'm losing signal to regain line of sight . I'm using the vista air version of the cinebot paired with DJI FPV Goggles V2 and the FPV radio V2 which are both older compared to the current generation of controller/goggles. Range is fair within a mile line of sight.
Awesome footage. Did you use gps?
Thanks! I do not use GPS but I will add one soon!
What if i use 6s 1300 mah instead of 1100 will it increase my flight time?
You'll definitely get more flight time but you will also add more weight which may effect handling. Something to consider if you plan to fly aggressively.
Very nice flight and footage. Why does it look/feel like it's slowed down? Not pointing a finger or anything, just legit wondering, looks really cool either way.
I'm not flying aggressively and the footage is stabilized with Reelsteady which sometimes zooms in and out of frame. This may have an effect with how the speed looks.
@@tabangcora makes sense. Super cool flow. Impressive.
@808TRK Thanks! 🙏
Nice video, is this color graded video?
Thanks! Yes it is color graded.
@@tabangcora Great! Whether it's GoPro's default Stablization or Gyroflow application stablized one
@@saran3g I used GoPro's ReelSteady to stabilize the footage. The Gyroflow software does a good job as well.
hello nice video broo , can i know what is your setting for gopro ,nd filter and did you have gps on drone ?
it would be helpful if you share because vid is beautiful an d
Thanks! The setting for the GoPro is protune enabled with a flat color profile. There is no in camera stabilization so that it can be stabilized in post by Reelsteady. You could also use the free stabilization software Gyroflow.
@@tabangcora how to use flat color in gopro hero 8 i just got one . Still learning like how to get great color or where you got the lut preset.
@@farisnazeri9841 in the GoPro menu, you go to Protune - Color and select flat. For the edit, I am using adobe premier. I'm not using any LUTs but I stretch the dynamic range in the histogram then increase the saturation and vibrance. I'll also adjust the color temperature as needed.
@@tabangcora does nd filter important and which one would you recommend.
@@farisnazeri9841 ND filter will help a lot. I use the Camera Butter ND8 filter
Where did you find this track in instrumental?
us.audionetwork.com/ great place for all kinds of music
Is this default tuning? Mine just got 5 minutes with the same battery and no action cam
Yes this is the default tune and rates. I'm using a CHNL black series 6s 1100mah battery.
Had you flown this spot before this flight? How was the signal when you were getting down low and behind the rocks?
I do most of my flying in this area. Radio and google signal is fair behind most of rocks pillars and smaller valleys with some. However if there is a significant hill between me and the drone, the signal will drop significantly. It is tricky to see the difference in topography between what I see in the goggles and I am physically. Just an FYI, I'm using DJI FPV Goggles V2 and DJI FPV Controller mode 2.
@@tabangcorai also want to do this setup, would u recommend me using the dji fpv and fpv 2 rx?
How it handle winds?
It depends on the type of flying that you're doing. For slow flying, it is fine with wind speeds up to 10mph. There is a little bit of drift that has to be controlled. For fast freestyle flying, it does well up to 20mph winds and a little bit more effort is needed to handle the wind. I fly in Acro and took some time to get accustom to its behavior. Compared to a smaller drone, this does much better with the wind.
Lindo
obrigado / gracias! 🙏🙏
At What voltage did you land?
I land at 21volts. Once I reach 21.5 I try to make my way back to where I started.
Bro i am newbie please tell me.. When i want to order cinebot 30 on geprc website there i can choose 4s or 6s version.
If i choose 6s, i cant use 4?And if choose 4s, cant use 6s?
Whats the difference between them and what would you recommend?
Sorry not my native language, Thank you
There recommended 4s 120c 1300 mah
Or 6s 60c 1100 mah
Both battery types will have similar performance. You can not use a 6s battery on a 4s drone. The 6s battery uses a xt60 connection and the 4s battery uses a xt30 connection. The advantage of the 6s battery is lower power draw since there are 2 additional cells and will allow the battery have a longer life. I would say the advantage of the 4s battery is the lighter weight and price for battery. I use 4s batteries on my other cinelog but have replaced many of them because they seem to degrade faster with time. My recommendation would be to get the 6s version. I hope that helps.
@@tabangcora very clear explanation.Thank you so much.
All the best homie✊
@@demon.93 Happy to help! Take care!
Nice flight !
How long does a flight without gopro last with this battery?