Ram 1500 5.7l Hemi Fuel Gauge Not Working P0463 - Part 2

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • Working on replacing the fuel level sensor on the 2017 Ram 1500. It failed and popped DTC P0463. We go through taking the fuel tank out of the Ram and actually testing the sensor itself. We also use AlfaOBD to engage the fuel pump to drain the tank before removal.
    ACH Automotive Playlist - • How To Obtain A Massac...
    Automotive Diagnostics Playlist - • Mazda 6 - Cooling Fan ...
    Mazda Repairs Playlist - • Almost Scrapped! We Go...
    Jeep Cherokee Repairs Playlist - • Jeep Cherokee Blowing ...
    ACH Automotive Amazon Store: amzn.to/2WHgvUV
    Follow along on Social Media for more behind the scenes!
    / achautomotive
    / achautomotive
    / achautomotive
    #P0463 #automotivediagnostics #ram1500 Disclaimer:
    Due to factors beyond the control of ACH Automotive, I cannot guarantee against improper use or unauthorized modifications of this information. ACH Automotive assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ACH Automotive recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ACH Automotive, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ACH Automotive.

Комментарии • 42

  • @ACHAutomotive
    @ACHAutomotive  4 года назад +3

    Mopar Fuel Sending Unit - 68197307AA - amzn.to/2Yayk0N
    OTC 6599 Fuel Locking Ring Wrench - amzn.to/2ANHbfP

    • @wildwoodtop
      @wildwoodtop 3 года назад +1

      dude your link is no longer valid

  • @mikepeterson238
    @mikepeterson238 3 года назад +11

    It may sound like more work but; 6 bolts hold the bed on, you just need to tip the bed up in front 8-10 inches (use wood scraps to sit on), no need to disconnect anything except related to the assembly. !/2 the work!

    • @jmax6614
      @jmax6614 Год назад +1

      You can do that on this truck because it has the 6'4" bed but you can't on a 5'7" bed because the pump sits under the cab

  • @northwash
    @northwash 3 года назад +3

    Great video! Thank you for the detail. Just finished with the notorious Ram front passenger side intermediary shaft and axle replacement and 3 days later my check eng light came on for this. Never ends. Thanks again.

  • @schmacintyre6099
    @schmacintyre6099 Год назад +4

    RAM needs a recall on these fuel pumps. Absolute garbage. Mine went at 27,000 miles!

  • @craigschmeiser8133
    @craigschmeiser8133 Год назад +2

    Excellent video! Good job of explaining what was going on.

  • @kiwisailor80
    @kiwisailor80 3 месяца назад

    Great video, not looking forward to doing this job, thanks for such a detailed overview.

  • @richardtarter5184
    @richardtarter5184 Год назад

    Your video is the best instruction video I've ever seen. Thank you.

  • @iamherenotheretobe
    @iamherenotheretobe 2 года назад +1

    I had a working fuel gauge just the p0463, Wiggled the harness underneath fixed it for now atleast.

  • @jonatasalves6986
    @jonatasalves6986 11 месяцев назад +1

    Awesome thank you

  • @baconatorsupreme5165
    @baconatorsupreme5165 3 года назад +3

    I changed the whole fuel pump and my truck still wont read my gas it still has the fuel sensor fail anyone help please

  • @rod123419
    @rod123419 2 года назад +1

    Great video I have a ram 2500 2013 replaced the fuel assembly and still have the same problem any suggestions

  • @MrThefunnyman3
    @MrThefunnyman3 3 года назад +1

    I have been going around trying to figure out my problem. I have the code for the fuel pump sensor is broke. I replaced my pump and still have the code. I believe it is a ground problem because when I bought the truck full tank would read 3/4 then several months later the tank read half at full and finally died completely a few months ago. I'd really appreciate any help on how to fix it. My truck is a 2012 with the 32 gallon.

  • @elmonevayaktewa7130
    @elmonevayaktewa7130 5 месяцев назад

    Ok watching these videos an I'm not sure if it's really my fuel pump now,I have a 5.7 Hemi Dodge Ram pickup it started to go work came back noticed the truck wasn't running so I tried to started it nothing it's cranking but don't start

  • @tongkaixiong
    @tongkaixiong Год назад +1

    How long did that pump last. I just changed it last year, and it goes bad again

    • @richardthelionheart01
      @richardthelionheart01 5 месяцев назад

      By from the dealer - not 3rd party auto store parts - I've had failure straight out of the box.

  • @jonathanbolagner5253
    @jonathanbolagner5253 3 года назад

    Ty for the video my 2015 ram have the same code but my gauge still working.Check engine light lit up when gas is half empty!?

    • @ACHAutomotive
      @ACHAutomotive  3 года назад

      Mine was extremely intermittent. Gauge would come and go, sometimes fast enough I wouldn't notice anything other than the light.

  • @abramsantos8193
    @abramsantos8193 Год назад

    Hello I got a 1999 Dodge ram 2500 4x4 I got a code p0462 low voltage sending unit I changed the sender and fuel pump still nothing I replace the cluster 2 still nothing I'm thinking it could be the timp fuse box or PCM ????

    • @ACHAutomotive
      @ACHAutomotive  Год назад

      Did you check all the wiring and connectors?

  • @jonleone777
    @jonleone777 Год назад +1

    Would have been much easier to lift the bed than to struggle like that.

  • @jesusreyes4102
    @jesusreyes4102 Год назад

    Where is the fuel filter??? There is no video on how to change it!!!

  • @myk55501
    @myk55501 Год назад

    Hey, Air Chisel works for top ring....

  • @user-xp6zd2sf1l
    @user-xp6zd2sf1l 6 месяцев назад

    Yeah my favourite tool is a big hammer

  • @EgoFiveFiveSix
    @EgoFiveFiveSix Год назад

    taking the bed loose is a lot easier.

  • @Mack.of.all.trades
    @Mack.of.all.trades 9 месяцев назад

    Why not out a hole in the bed?

  • @jojocastro584
    @jojocastro584 3 года назад

    Mine dealership said 700$ plus tax for that parts plus labor

    • @ACHAutomotive
      @ACHAutomotive  3 года назад

      I don't doubt it, I had heard, myself, anywhere between $800 and $1000.

    • @lc4002
      @lc4002 3 года назад +1

      You guys are getting ripped. I got it done, parts and labor $450.

    • @ray4718
      @ray4718 2 года назад

      @@lc4002 where?

    • @rippleeffectmedia.
      @rippleeffectmedia. 2 года назад

      @@lc4002 just bought at autozone 287. Gonna install myself tmmr. By taking bed off

    • @travisjackson6923
      @travisjackson6923 2 года назад

      I just got it done for $280

  • @tomjohnson8737
    @tomjohnson8737 2 года назад

    I Hate rat. Look at that battery. Lol