We came across some old conveyor belts like 2ft wide, we cut into 8ft long strips, they work great for the metal tracks when we are in a driveway or street,
When I left for the south last fall, I had to build a lumber "road" to get my trailer out onto the blacktop. MUD that would just ooze out and leave you up to the axles. I got the trailer moving on one laydown in front of the trailer tires and a full path for the truck. I did not stop just pulled that trailer out. The trailer tires made six inch grooves in the muddy ground. Truck was OK since it was on the plank road and then the blacktop.
I’ve been to a few places with hay to get in the field I would have back in, turn around get loaded the back out because the gate was so tight. Makes things so stressful
I think you're right, a 10 wheel rollback, Even with a lift axle would be perfect for you with your kind of equipment and even your larger mini excavator.
When i drove semi otr. I had to deliver to a rite aid that was under construction so 1 small parking lot they use day cabs and pups not otr 53s 2 littered with construction supplies. I had to blind side back around the building and there was a 2ft tall retaining wall where i needed to swing my nose to get in line with trl. I had walk the trk sideways. Parking lot had 1 layer of asphalt and was covered in wet clay. My driver seat floor was filthy from all the in and out. Took a week to get it cleaned up decent
must be cooler weather there(ya got long sleeves) ps. no boards needed...Need me ,your neighbor ,to come out with my MTL w/ rubber wonder to come out lend a hand on that steep land.... happy grinding!
@@VBELTandSON why not a permanent mount one. I know want to get one for my f350 flatbed. I mounted a 52 forward and 20 rear leds on my headache rack. Need to hook them up still
must be cooler weather there(ya got long sleeves) ps. no boards needed...Need me ,your neighbor ,to come out with my MTL w/ rubber wonder to come out lend a hand on that steep land.... happy grinding!
My worst situation ever was in Marseille years ago,picking up a 64 imperial....had to drive nearly a km backwards 🙈 never ever again 🙄😅
Dixie Mae yes I mean kilometer km ! 😅
Dixie Mae 1 km is about 0,62 mile... but it was feeling like 5....😂🙄🙈
Good thing it was daylight and blindfolded
We came across some old conveyor belts like 2ft wide, we cut into 8ft long strips, they work great for the metal tracks when we are in a driveway or street,
Follow the yellow pine road.
if you going to make a film about backing a trailer might be a good ideal to be able to back a trailer
Hahah good one kid
Nice backing up skills 😎👍 Your pretty lucky to work with your dad. Your both good men 😎
thank you! and I feel lucky to work with my dad. always trying to keep up with him
Customer wants a view. All yours subs want to watch you make the view. WIN WIN!
Also wanted to add. I am watching this BEFORE Andrew and let's dig
filming the view video aswell. waiting till its all done before I post that one
dang thank you!!!
When I left for the south last fall, I had to build a lumber "road" to get my trailer out onto the blacktop. MUD that would just ooze out and leave you up to the axles. I got the trailer moving on one laydown in front of the trailer tires and a full path for the truck. I did not stop just pulled that trailer out. The trailer tires made six inch grooves in the muddy ground. Truck was OK since it was on the plank road and then the blacktop.
I’ve been to a few places with hay to get in the field I would have back in, turn around get loaded the back out because the gate was so tight. Makes things so stressful
I am curious couldn't you get rubber pads for that. Like they make for tank to go down the road?
Thomas Desmond maybe. But I don’t have any to try
Try backing a 53 foot spread axle flat bed into there 😁 I did that in Philadelphia and well any east coast areas
So its called backing a trailer in a gopher hole which you do very well
Them backing up skills though 🖒
🤘🏻
🤘🏻
I think you're right, a 10 wheel rollback, Even with a lift axle would be perfect for you with your kind of equipment and even your larger mini excavator.
Jerry Hoskins maybe sometime down the road we can see a truck like that 🤞🏻
Nice backing up! Nice to see I’m not the only one with similar days!!! Keep up the Great videos. Show pictures of view on job site. Where’s Boone?
Jeff Stewart haha thanks and he was chilling in dads truck
Is there a way for you come the opposite way so that you can back up driver side instead of blind side?
Daniel_ Duran yeah I would have to find a road somewhere to turn around but won’t have to do that again. Not loaded anyways
Tricky tricky stuff there man
When i drove semi otr. I had to deliver to a rite aid that was under construction so 1 small parking lot they use day cabs and pups not otr 53s 2 littered with construction supplies. I had to blind side back around the building and there was a 2ft tall retaining wall where i needed to swing my nose to get in line with trl. I had walk the trk sideways. Parking lot had 1 layer of asphalt and was covered in wet clay. My driver seat floor was filthy from all the in and out. Took a week to get it cleaned up decent
Some days I think I drive backwards better than forward
Going to be doing that tomorrow with a processor except using tires not boards
Kristopher Root send me a video of that
V-BELT and SON I’ll try, I’ll probably be running the machine so not sure how it will turn out lol
must be cooler weather there(ya got long sleeves) ps. no boards needed...Need me ,your neighbor ,to come out with my MTL w/ rubber wonder to come out lend a hand on that steep land....
happy grinding!
great content, real life use of equipment
Wow that was a lot of work and skill backing that trailer and then unloading the machine. 😤
You actually made it look easy but I know better. Nice 👍🏻
You need a beacon light on your trk
tractorboy31 yeah need to get a magnetic one
@@VBELTandSON why not a permanent mount one. I know want to get one for my f350 flatbed. I mounted a 52 forward and 20 rear leds on my headache rack. Need to hook them up still
@@VBELTandSON mini light bar from fenix would be better than a beacon.
Stephenie Grenoble light bar on front and back. Both on in this video
Not the best situation for sure, well done, no damage and no injuries. A rubber track machine would have made things a lot easier. 👍👍👍
The trademan body on your dodge 5500hd is a 6 or 8 ft body ?
Richard Gavin 9foot
Third 😬👍
Dixie Mae i was backing up as well...🙄
Dixie Mae hahaha...😂😂 I remember in 1 of your video it looks like you driving in 4 low...🐌🐌🐌🐌🐌🐌
must be cooler weather there(ya got long sleeves) ps. no boards needed...Need me ,your neighbor ,to come out with my MTL w/ rubber wonder to come out lend a hand on that steep land....
happy grinding!