INSTALLATION TUTORIAL_C30PRO+MATX+360AIO+ATX PSU+335 GPU+LOWER PSU

Поделиться
HTML-код
  • Опубликовано: 10 июл 2024
  • This is a typical solution for C30Pro, explaining the installation method for each accessory and explaining all limited dimensions.
    Official Stores-Mechanic Master ComputerCase:
    www.aliexpress.com/store/1101...
    www.ozon.ru/product/mechanicm...
    www.newegg.com/Seller-Store/M...
  • НаукаНаука

Комментарии • 6

  • @DSG-GAMING-33
    @DSG-GAMING-33 Месяц назад +3

    I believe it would be beneficial to position the power supply unit (PSU) at the back of the motherboard. This arrangement would create more space for cable management and enable front fans to intake air. To accommodate the PSU, the case could be made deeper. This additional depth would also allow for the installation of an air cooler such as the NH-U12A from Noctua.

    • @MechanicMaster2017
      @MechanicMaster2017  29 дней назад +2

      We also have a product F36 with the idea you mentioned, which places the power supply specifically on the top of the chassis for easy wiring and creates a good ventilation environment

    • @DSG-GAMING-33
      @DSG-GAMING-33 29 дней назад +2

      @MechanicMaster2017 Thanks for the reply, but to be fair, that configuration is best suited for a liquid cooling system. I've noticed that with an air cooler, the PSU is too close to the air cooler, which draws a lot of heat from the cooler. To make matters worse, if the intake fan on the PSU is facing just over the air cooler, it exacerbates the issue.

    • @MechanicMaster2017
      @MechanicMaster2017  28 дней назад +1

      @@DSG-GAMING-33 We also fully understood your question at the beginning of our design,When we used 14700KF+4080gpu for performance testing, the temperature of the PSU was only a few degrees higher than room temperature, and the impact was not significant;While slightly increasing the temperature of the PSU, the temperature of other hardware has significantly decreased

  • @LambangKP
    @LambangKP 21 день назад

    Do you give out sample for us content creators to review your cases?
    I just uploaded my PC Build content using Mechanic Master C28, and my viewers love it.
    and is there any way for me to contact you? Thank you beforehand

    • @MechanicMaster2017
      @MechanicMaster2017  21 день назад

      Welcome very much, my dear friend. You can inquire with our customer service on our website and remember to tell us your name and purpose of visit.
      Official Stores-Mechanic Master ComputerCase:
      www.aliexpress.com/store/1101553997?spm=a2g0o.detail.0.0.14a6p4t0p4t00g