52 Inch Agri-Fab Lawn Sweeper
HTML-код
- Опубликовано: 15 сен 2024
- This is a video of the Argi-Fab lawn sweeper unit. This video shows the box this product was shipped in. What comes in the box. Assembly tips and issues. The finished product in operation behind a John Deere tractor. It works really well and it is easy to dump.
![Eminem - Like My Shit [Official Audio]](http://i.ytimg.com/vi/vx_IMvFkrfA/mqdefault.jpg)
Works great! ruclips.net/user/postUgkxprGGPRQoChQaA8u58dt7miEpxQBKiWeJ More difficult with longer grass, though, but I was expecting that. I have a small back yard, it seemed like overkill to buy a lawnmower with an engine. This is easy to carry in and out of the basement through the bulkhead. Very sharp (be careful). At the back of the mower are little wheels, which I use when pulling the mower backwards, so it's easy to readjust direction. I'm including a photo which shows the before and after for my lawn when it was at its longest. For long grass like that you really have to put some muscle into it, and I needed to go into a new section of grass with some momentum, but when the grass is only an inch or two higher than regular cut height it's quite easy. The lawn is still patchy and full of weeds, but at least it's a good height! A step in the right direction.
I was given a 42" Sears craftsman pull.behind. about 6 years old. Wow!
Wow! I'm saving up for a larger one..... thanks....
7:02 “tight turn radius” is your tractor, not the sweeper
At work we had a Termite ( Billy-Goat Brand) lawn vac. Reduction 8:1. Would eat a 2" branch. If you went slow so as not to clog ...it worked miracles. Had a hose attach.. lawn vacs everywhere but the Termite model seems hard to locate used.
I got mine 5 years ago ordered an extra bag for just incase mine goes bad on the bottom set mine to just below 2 inches works just fine no problems I do not use mine on wet grass hard to clean out if you do not have an air compresser.
Hi Billy, Thanks for your information on your unit. It is appreciated!
Hi, I have one . I got a piece of sheet metal , made a framework with a couple caster/ swiveling wheels on the rear corners . It is fastened to the brush frame . the bag rest on top that frame. It still dumps out the same .
Well that’s really nice if you have a place like that to empty it! But what then if you don’t! I emptied it out into a trap and then bagged it ! Quite a job
Chis, I could see it being a problem if you have to bag it. Yes, we are in the country and wouldn't dream of giving away good mulch. We dump and mix it with other organics and rotate the piles. It makes excellent compost.
And if you play it at 2x speed, he gets it done in half the time.
Excellent Lol
Good call!
I have been telling my wife that for years.
Hi, I added a old window screen to the Opening to prevent stuff from flying out . ( going too fast ) .
How'd you get your discharge chute to stay up?
Thanks
Sorry, I'm not sure what you mean.
6:30 if you want to see how it dumps
Always interested in seeing how things dump
Hi, it also stores , folded up vertically . minimum space taken up when not used.
Actually 6:42. But thanks for trying.
Do you still have the John deere x 320 and agri fab 52inch lawn sweeper?
Nathan, it is my neighbor's and he still has and uses both.
If you are in the UK, this is NOT man enough for our grass. I have to say that I am not impressed by either the quality of manufacture of the product or the company's after sales or reaction to constructive criticism of the product! I have been through countless bolt for the sweeper brushes and 4 of the 6 brushes are now scrap. The main problem is that the product is just not able to cope with...1) our damp grass 2) any kind of undulation of the ground that may result in additional pressure on one end of the brushes compared to the other and 3) I know it sound mad but the manufacturer states that it must not be used at a greater speed than walking pace!!! I have a Kubota BX231and 3 acres to mow and pick up on, Nobody who buys a 54" sweeper (because of the area they have to cover) should be expected to only use the sweeper at walking pace!!!
I now intend to cannibalise it keeping just the frame, sweeper guard and bag and build something that is man enough to do the job! For the UK and when doing large areas, you need to be spending about £1000.00 unless your lawn is perfectly flat, and you have lots of time to go very slowly and empty very regularly!
Hi, question ? Do you mulch your lawn(s) ? You spent all that money ,
You could have the add on bagger Or a pull behind vacuum? " Right equipment
For Correct Job !
@@crashwrench Yes, I do mulch. The issue in the UK is that there is quite a period of the year (spring and Autumn) where the grass is growing but there is still a lot of dampness in the grass and the air; result, you get clumps of grass that drop off the cutter, these then rot and kill the grass under them! Secondly, we have a lot of leaves which I collect these for leaf mould for the veg patch and we have a lot of acorns. Anything other than a sweeper struggles to collect the acorns and the leaves at a decent pace. Final problem is that there are very few (to no) attachments in the UK for this task, so I was relying in the USA to build something that would both do the job and to be of decent quality...Failed on both counts! At this money, it should have been the right tool for the job!! To clarify, pull behind vacuums are crap and expensive too and the Kubota grass/leaf collector costs about £5,500 ($6414) extra here!!!!!! I don't own a golf course I just want to look after 2.5 acres!!!
163like
Dog trainers