I am new to embroidery but not to sewing. This just felt like the next move in my apparel business. I bought the stitch artist 3 so I could skip to having all the additional options. I figured I’d self teach. Long story short I’m glad I found this video. It’s very helpful and informative. Thank you for the content!😍🪡
Although I don't want to learn to digitize, I feel that it is important to watch these kind of videos to help me be successful as an embroiderer. It helps me understand the process, so I can judge the products that I buy. Plus, you sound so patient, Lisa.
I just bought Embrilliance (this video helped me decide to get it!) I am following your tutorial and it's already been so helpful! In particular, the Create Designs, thank you for mentioning that! When I first opened Embrilliance I didn't see the panel there with all the editing tools that was in your video and was worried but then heard you mention clicking on that. I am so excited to get into this! Thank you for making this video.
Lovely teaching style. The right amount of encouragement without being patronising ☺️ I bought the Stitch Artist software today and I’m so excited to learn it!
Fabulous video. So clear and everything explained. I have just digitised a leaf from a photo. It stitched out great the second time. First time the leaf veins were all separate stops and starts. So I made it a continuous line for the second attempt. Now I realise how much I have to learn!!! Thank you so much for making this video.
I want to thank you because I bought a Janome Embroidery machine and Embrillance software, although a little expensive on the software I am going to purchase the Stitch artist Level 1 software because I am wanting to learn digitizing because the embroidery with digitizing is so beautiful. I never understood anything about digitizing because I couldn’t understand the people who where explaining the instructions until I found your video, thank you so much and you are so patient!
Amazing tutorial I’m an experience vector artist who normally works in illustrator for vinyl prints etc. over the years I’ve been considering adding embroidery digitization as some clients has inquired. Over a few weeks now I’ve been looking at several digitizing software, however not much detail tutorials seems to be available with proper steps explained. You did great with your explanations and just with this one video I have made a decision on getting level 3. Also, I will now order a single needle embroidery machine to test designs and refine and improve skills. Thanks again for taking the time and effort in putting together this comprehensive tutorial
Excellent video - excellent teacher - to the point, clear, perfect descriptions of steps - just purchased StitchArtist 2 and made my first digitized design! Bravo and thank you!
Thank you very much for a great tutorial. I started to learn digitizing almost 17 years ago when I bought my software and at that time there were not any resources to find out what tool does what function and I had to wing it! But I wanted somebody to navigate through the process in an organized manner and you nailed. I really appreciate this video tutorial. Thank you very much.
I had been using my Singer Futura software for years, full of frustration! I wish I would have found Embrilliance long time ago! This is a wonderful demonstration! Thank you so much. I am excited to get started with my first design with Embrilliance.
This is perfect timing! I am trying to duplicate a small religious symbol for some friends in a monastery for their personal use. I was able to find all the symbols they use except for one little tiny one! Now maybe I can take their drawing and digitize that one little piece I have left to do! Wish me luck! Thank you a million times!
This was wonderful! I still haven't decided which program I want but this is what I needed to see. This makes me want to learn more! Thank you so much!
I've been trying to decide whether or not to purchase StitchArtist. Your great video made the choice a lot easier. Can't wait to download this software! Thanks Lisa!
Hi Lisa! Thanks to this great video, I was able to digitize my 1st ever original design! So thanks a lot. However, after stitching out my design, I found that I did not line up my outline bean stitch neatly and would like to line it up better. I brought the working file back to the program but I don’t know what I need to do to get it back to my nodes to move the lines around. I hope I am making sense here
This was a superb video it helped refresh my digitizing that I was taught many years ago. But I was taught using Embird which is Windows program. But having to use a program to work in Windows but using a Mac .I thought what better way to work in Mac on a Mac. So I bought Embrilliance and been slowly learning again. But I understand the concept.This video was really great. I have a company logo to do for my son on a jacket he want to have of his own company to advertise when he's out in his off time. This video will help me immensely.Thank you !
thank you Lisa, I purchased Stitch Artist 2, however I am new to digitizing this tutorial was a great help in step by step from start to finishing a design. I was able to stop and start as i began to understand the program buttons, the only thing I didnt see is how to actually save your design after doing the waves ?? Im going to save it as a working and wait for someone to share that last step Thanks again I believe I will do it again tomorrow
I enjoyed this video. It is a helpful introduction for those new to software. I might make a suggestion. As I don't know the software, and exactly what you're doing, I often did not know where the cursor was. It would be helpful to add directional language. Rather than say here, over there, etc... Say top right, bottom center... Thank you
I absolutely loved this video. It was very helpful. I completed my design and saved it with a name but can’t find it on design database transfer. Where does it go? Oops found the WiFi to Brother/Babylock button under Utility- design database transfer not needed. I’m learning………
So basically, essentials is mostly for designs armrests bought? If I want to insert an image like you, can I do the basic stuff in artist 1? Do digitize?
This is one of your best videos, for me. I get distracted too easily when too much chatter and actions going on. I am looking at the SA series; already have Essentials. Do I need to buy SA 1 first, then add SA 2? You've also shown a video on Thumbnailer that explained it much better. Going to get that as well - one pay day at a time. I'm going to view more of your SA videos, too! Thank you.
Hey Lisa. Great video. I have wondered about the ladder stitch and followed your procedure in my software as I watched your video. My question is, how do you get the nodes to automatically open as cusp. I've noticed in other tutorials your nodes will automatically open as cusp. Is there a way to choose which type of node I want before before I begin drawing with points? I know I can change them one at a time, but getting them to start out that way is a huge time saver. Thanks. So glad we can find these videos and learn on our own time.😊
Be sure to read the pdf manual along with the hitchhiker’s guide on our start page. There is a great overview video as well as beginner info on this page. www.Embrilliance.com/start
What kind of embroidery machine do you recommend for someone using Embrilliance StitchArtist 2 and with a design that involves a lot of color stitches?
This was a very great video, i enjoyed this so much, i wanted to know can you do a class using a picture like something for a busines (ect) aging this was helpful and i have learned a lot from you, thank you
As this video says - make a plan and follow your plan! Doesn’t matter what the picture is :) study your test sew from this project to see what can be improved or changed the next time. The process is the same no matter the subject! Check out the hitchhikers guide as well as beginner info on this page. www.Embrilliance.com/start
Thank you, I learned so much today. Could you please make a video explaining how to go about when digitizing two or more objects in sketch style while they are overlapping. How do I digitize it so that the bottom layer does not show through the top layer. I know how to remove the underlay and adjust the density to get to the sketch part, but don't know how to remove the overlap with both the sketch stitches as well as outline (hope I make sense to you)
Why does my oval look like an amoeba when I close it instead of a nice pretty oval like yours? I can go and adjust the angles afterwards, but I am wondering if something is set squirley in my software.
Not sure. Probably not the software but something in how you are drawing with points. Our videos are made by someone who has done lots of practice :) I’m sure their first ones were amoeba looking until they learned where to click :) Also for ovals- why not use the shapes flyout? Support can send screen captures or explain more if you need more info. Http://embrilliance.com/contact-us-2
Hi team! Thank you for providing this video, I understand how to digitize. But what I can't seem to find any information on is how you digitize an embroidery design that is meant to be embroidered on cardstock? I know the stitch length needs to be changed... can you kindly provide any information on this? Type of stitch? Single bean? Stitch length?Thank you 😊❤
You need to choose the stitch types and styles that you want. Study designs that you’ve stitched and measure them to replicate the settings. Enjoy the process.
thank you for your response. I guess my question is, when digitizing using Embrilliance do you know what the correct stitch length is when creating an embroidery design that will be embroidered on cardstock? @@Embrilliance
@@quiltsofhousewives9394 study other designs you have successfully stitched on cardstock. There are so many styles that can be stitched on cardstock- your experience and test sews will help guide you in your artistic choices. Enjoy!
Hi Lisa, can you help me please, If you wanted to put a number on the sail or a name on the hull, would you fill the space and then put the number on top, or would you put the number in and surround it by the fill stitch?
Hi, could you please tell me how you access the "right click" menu on mac(15:36min.), to cut or break apart. I have been trying but its not working for me. I'm using a demo version and the mac's track pad, as I don't normaly use a mouse. Thank you for your video*
Thank you for the video I want to learn how to digitizing but, I don't have the create botton in the bar tool, how can I find it? my software didn't come with that tool? that's possible?
Be sure that your StitchArtist serial number is listed in your program. be sure to reach out to customer support to get help - they can assist you! They answer every question within 24 hours if you submit using the contact us form. You can even log into the system to see all of your conversations! www.Embrilliance.com/contact-us
Excellent video! Would it be possible for you to do a video or point me in the right direction to digitize small letters? the only stitch i can get to look halfway decent is a run stitch for the outline. It looks so shoddy in the software I didnt bother finishing. Again, even a website will help. I am having no luck trying to find info specifically for stitchartist lvl 1.
Since you don’t have controls of The higher levels you will need to break your objects and possibly digitize your own underlay separately. Look at small fonts that stitch well in your software and practice replicating what you see.
@@Embrilliance Thank you, you are right digitizing is art. That is why I love it so much, I am not going to learn it overnight, but for sure figure it out. I will try that and email them. :)
Did they split out some of the features in Level 2 into Level 3? I'm seeing that SVG support is no longer in Level 2 and only in Level 3. Seems like a recent development given that this video was uploaded in January of this year.
You can purchase StitchArtist L3 completely. Upgrades are available to those that have purchased an earlier level so that they do not have to purchase twice.
check the link in the video description :-) Not only do we give you the graphic files, but you get the BE files to look at in your software! The stitchout of both is shown on the opening scene of the video.
@@PinkFridays then you need to add your StitchArtist serial number and restart the program. If you need further assistance please reach out to support. Http://embrilliance.com/contact-us-2
I am new to embroidery but not to sewing. This just felt like the next move in my apparel business. I bought the stitch artist 3 so I could skip to having all the additional options. I figured I’d self teach. Long story short I’m glad I found this video. It’s very helpful and informative. Thank you for the content!😍🪡
I can’t believe that was over 40 minutes. It sailed ⛵️ by! I loved this lesson. Thank you for the instruction, Lisa.
This is the very first one I have been able to understand. You explained everything in a way that I understood it. You are a great teacher. Thank you
Although I don't want to learn to digitize, I feel that it is important to watch these kind of videos to help me be successful as an embroiderer. It helps me understand the process, so I can judge the products that I buy. Plus, you sound so patient, Lisa.
I just bought Embrilliance (this video helped me decide to get it!) I am following your tutorial and it's already been so helpful! In particular, the Create Designs, thank you for mentioning that! When I first opened Embrilliance I didn't see the panel there with all the editing tools that was in your video and was worried but then heard you mention clicking on that. I am so excited to get into this! Thank you for making this video.
Lovely teaching style. The right amount of encouragement without being patronising ☺️
I bought the Stitch Artist software today and I’m so excited to learn it!
Fabulous video. So clear and everything explained. I have just digitised a leaf from a photo. It stitched out great the second time. First time the leaf veins were all separate stops and starts. So I made it a continuous line for the second attempt. Now I realise how much I have to learn!!! Thank you so much for making this video.
This is a FANTASTIC hands-on video! I am so excited to see the dramatic, simple commands. Thank you so much!
I want to thank you because I bought a Janome Embroidery machine and Embrillance software, although a little expensive on the software I am going to purchase the Stitch artist Level 1 software because I am wanting to learn digitizing because the embroidery with digitizing is so beautiful. I never understood anything about digitizing because I couldn’t understand the people who where explaining the instructions until I found your video, thank you so much and you are so patient!
Glad to hear you like our videos! Be sure to subscribe to our channel!! Happy creating!
Amazing tutorial
I’m an experience vector artist who normally works in illustrator for vinyl prints etc. over the years I’ve been considering adding embroidery digitization as some clients has inquired.
Over a few weeks now I’ve been looking at several digitizing software, however not much detail tutorials seems to be available with proper steps explained.
You did great with your explanations and just with this one video I have made a decision on getting level 3. Also, I will now order a single needle embroidery machine to test designs and refine and improve skills.
Thanks again for taking the time and effort in putting together this comprehensive tutorial
Thanks for the feedback! Best wishes on your journey in machine embroidery!!
Excellent video - excellent teacher - to the point, clear, perfect descriptions of steps - just purchased StitchArtist 2 and made my first digitized design! Bravo and thank you!
Wonderful!
I just purchased the Embrilliance Stitchartist 1 today! Thank you for this video!🤍👏🏻
Thank you very much for a great tutorial. I started to learn digitizing almost 17 years ago when I bought my software and at that time there were not any resources to find out what tool does what function and I had to wing it! But I wanted somebody to navigate through the process in an organized manner and you nailed. I really appreciate this video tutorial. Thank you very much.
I had been using my Singer Futura software for years, full of frustration! I wish I would have found Embrilliance long time ago! This is a wonderful demonstration! Thank you so much. I am excited to get started with my first design with Embrilliance.
Thanks for sharing your enthusiasm!!
This is perfect timing! I am trying to duplicate a small religious symbol for some friends in a monastery for their personal use. I was able to find all the symbols they use except for one little tiny one! Now maybe I can take their drawing and digitize that one little piece I have left to do! Wish me luck! Thank you a million times!
This is a fantastic video. I would love to see a video like this showing how to make a appliqué!
Thank you for the tutorial. It was very helpful! I loved following along and creating this cute sail boat with you!
This was an amazing tutorial! Thank you, Lisa Shaw!!
Once again a fabulous instruction video so you can utilize all the functions in Stitch Artist. Thanks.
Best simplified teaching video. Thank you
New to embroidery & Embrilliance modules- love this and was able to complete in SA1!
You are the BEST teacher!
Your an excellent teacher, I just purchased this program because my grandmother and I are taking up embroidery. Thank you so much 😊
This was wonderful! I still haven't decided which program I want but this is what I needed to see. This makes me want to learn more! Thank you so much!
I've been trying to decide whether or not to purchase StitchArtist. Your great video made the choice a lot easier. Can't wait to download this software! Thanks Lisa!
You are so welcome!
Hi Lisa! Thanks to this great video, I was able to digitize my 1st ever original design! So thanks a lot. However, after stitching out my design, I found that I did not line up my outline bean stitch neatly and would like to line it up better. I brought the working file back to the program but I don’t know what I need to do to get it back to my nodes to move the lines around. I hope I am making sense here
This was a superb video it helped refresh my digitizing that I was taught many years ago. But I was taught using Embird which is Windows program. But having to use a program to work in Windows but using a Mac .I thought what better way to work in Mac on a Mac. So I bought Embrilliance and been slowly learning again. But I understand the concept.This video was really great. I have a company logo to do for my son on a jacket he want to have of his own company to advertise when he's out in his off time. This video will help me immensely.Thank you !
Perfect! I am ready to puchase emboidery software! But I need to update my laptop first! Excellent instructor! Thank you!
I love this video!! So informative and enjoyable. Thank you so much!! :)
Thank you, what a great tutorial. I am very new to this so has been a great help 🙂
What a fantastic video!!! Thank you so much!!!
I like the way you teach you are the best
thank you Lisa, I purchased Stitch Artist 2, however I am new to digitizing this tutorial was a great help in step by step from start to finishing a design. I was able to stop and start as i began to understand the program buttons, the only thing I didnt see is how to actually save your design after doing the waves ?? Im going to save it as a working and wait for someone to share that last step Thanks again I believe I will do it again tomorrow
@@MaryKOFP the saving is done File > save working file to computer. file > save stitch file as to the usb. First video on the Essentials playlist!
Great tutorial! You explained everything very clearly. Thank you!
Thank you Lisa, just the video I needed to decide what package from Embrilliance I required next.
Such an excellent teacher!
love your videos. i am learning a lot from you Ms Lisa.
Looking forward to doing this for real! Thanks!
Thank You very Much Lisa!! This is exactly what I was looking for! You have done a wonderful job in this tutorial!
Glad it was helpful!
Great explanations and easy to follow! Thank you
Such a helpful video, great pacing! Thinking about investing in level one :)
I enjoyed this video. It is a helpful introduction for those new to software. I might make a suggestion. As I don't know the software, and exactly what you're doing, I often did not know where the cursor was. It would be helpful to add directional language. Rather than say here, over there, etc... Say top right, bottom center... Thank you
Your a Great teacher I understand that very well
More pieces of Embrilliance to buy?
I absolutely loved this video. It was very helpful.
I completed my design and saved it with a name but can’t find it on design database transfer. Where does it go?
Oops found the WiFi to Brother/Babylock button under Utility- design database transfer not needed.
I’m learning………
This was great to watch and learn. You made it look so easy.
Great explanation! Love your video . Thanks
Awesome Video, Thank You
Thank you so much I just shared your vid with a fellow digitizing newbie
So much valuable information, thank you 🙏🏾
Brilliant!
So basically, essentials is mostly for designs armrests bought? If I want to insert an image like you, can I do the basic stuff in artist 1? Do digitize?
This is one of your best videos, for me. I get distracted too easily when too much chatter and actions going on. I am looking at the SA series; already have Essentials. Do I need to buy SA 1 first, then add SA 2? You've also shown a video on Thumbnailer that explained it much better. Going to get that as well - one pay day at a time. I'm going to view more of your SA videos, too! Thank you.
You can start with Level 1 and upgrade to Level 2 OR you can get StitchArtist L2 full version. Glad that you enjoy our videos!
Thank you so much for teaching
Thank You Lisa.
Great Video! You must have been a teacher at some point in your life.
Lisa has been teaching people to use embroidery software for over 20 years.
Hey Lisa. Great video. I have wondered about the ladder stitch and followed your procedure in my software as I watched your video. My question is, how do you get the nodes to automatically open as cusp. I've noticed in other tutorials your nodes will automatically open as cusp. Is there a way to choose which type of node I want before before I begin drawing with points? I know I can change them one at a time, but getting them to start out that way is a huge time saver. Thanks. So glad we can find these videos and learn on our own time.😊
You need to hold down the shift key when creating them. Be sure to watch the draw with points videos on our StitchArtist playlist!
Great video! Do you know if Stitchartist has all the features of Essentials or do I need both?
I'm here to prep for the CT workshops. I really need a translation tool for the commands of my old software>Embrilliance Stitchartist 3🙃.
Be sure to read the pdf manual along with the hitchhiker’s guide on our start page. There is a great overview video as well as beginner info on this page. www.Embrilliance.com/start
LOL...Hitchhiker's Guide @@Embrilliance
What kind of embroidery machine do you recommend for someone using Embrilliance StitchArtist 2 and with a design that involves a lot of color stitches?
Embrilliance works with all machines!
Thank you 🙏🏽
I am inspired!
This was a very great video, i enjoyed this so much, i wanted to know can you do a class using a picture like something for a busines (ect) aging this was helpful and i have learned a lot from you, thank you
As this video says - make a plan and follow your plan! Doesn’t matter what the picture is :) study your test sew from this project to see what can be improved or changed the next time. The process is the same no matter the subject!
Check out the hitchhikers guide as well as beginner info on this page. www.Embrilliance.com/start
Thank you, I learned so much today. Could you please make a video explaining how to go about when digitizing two or more objects in sketch style while they are overlapping. How do I digitize it so that the bottom layer does not show through the top layer. I know how to remove the underlay and adjust the density to get to the sketch part, but don't know how to
remove the overlap with both the sketch stitches as well as outline (hope I make sense to you)
Reshape your objects so that they are not overlapping! You have complete control over the shapes of the objects.
Does either version of StitchArtist allow me to automatically create an outline or do I have to draw that on manually?
Why does my oval look like an amoeba when I close it instead of a nice pretty oval like yours? I can go and adjust the angles afterwards, but I am wondering if something is set squirley in my software.
Not sure. Probably not the software but something in how you are drawing with points. Our videos are made by someone who has done lots of practice :) I’m sure their first ones were amoeba looking until they learned where to click :)
Also for ovals- why not use the shapes flyout? Support can send screen captures or explain more if you need more info. Http://embrilliance.com/contact-us-2
Very nice. More please.
And if possible Digitizing 202..
Thank you.
Digitizing 202 happens when you start pushing buttons :). Can’t wait to see what you create!
@@Embrilliance OK. Challenge excepted.
Can do. How do I share?
@@jkapie post photos and tag us on social media! #Embrilliance
Great lesson!!
Bravo madam !
Hi team! Thank you for providing this video, I understand how to digitize. But what I can't seem to find any information on is how you digitize an embroidery design that is meant to be embroidered on cardstock? I know the stitch length needs to be changed... can you kindly provide any information on this? Type of stitch? Single bean? Stitch length?Thank you 😊❤
You need to choose the stitch types and styles that you want. Study designs that you’ve stitched and measure them to replicate the settings. Enjoy the process.
thank you for your response. I guess my question is, when digitizing using Embrilliance do you know what the correct stitch length is when creating an embroidery design that will be embroidered on cardstock? @@Embrilliance
@@quiltsofhousewives9394 study other designs you have successfully stitched on cardstock. There are so many styles that can be stitched on cardstock- your experience and test sews will help guide you in your artistic choices. Enjoy!
Hi Lisa, can you help me please, If you wanted to put a number on the sail or a name on the hull, would you fill the space and then put the number on top, or would you put the number in and surround it by the fill stitch?
You can have up to 3 layers of stitches without any issues at all! In fact you will get better coverage and NO GAPS if you do layer them.
Awesome tutorial!!!
Glad you liked it!
Hi, could you please tell me how you access the "right click" menu on mac(15:36min.), to cut or break apart. I have been trying but its not working for me. I'm using a demo version and the mac's track pad, as I don't normaly use a mouse. Thank you for your video*
Your right click settings on Mac are set in your Apple Settings. Most likely it is a two finger click on the trackpad but check your Apple settings.
Fantastic
Thank you for the video I want to learn how to digitizing but, I don't have the create botton in the bar tool, how can I find it? my software didn't come with that tool? that's possible?
Be sure that your StitchArtist serial number is listed in your program. be sure to reach out to customer support to get help - they can assist you! They answer every question within 24 hours if you submit using the contact us form. You can even log into the system to see all of your conversations! www.Embrilliance.com/contact-us
5:30 I do not have the image button. I have level 1. Maybe I’m missing something?
Never mind, I found it. I had to click on the "create" button. smh
Totally Bought essentials when I should have bought Stitch Artist *groans*
Remember that they have different jobs - There is a great overview video as well as beginner info on this page. www.Embrilliance.com/start
Thank you been putting off thinking it to hard think I can do this
Yes you can! Enjoy!!
Thank you!
You're welcome!
So helpful!!!
Excellent video! Would it be possible for you to do a video or point me in the right direction to digitize small letters? the only stitch i can get to look halfway decent is a run stitch for the outline. It looks so shoddy in the software I didnt bother finishing. Again, even a website will help. I am having no luck trying to find info specifically for stitchartist lvl 1.
Since you don’t have controls of The higher levels you will need to break your objects and possibly digitize your own underlay separately. Look at small fonts that stitch well in your software and practice replicating what you see.
niceeee video, thanks so much!!!
Where do I get sailboat ?
I want to work along
The blog post with the files is linked in the description of the video
Thank you!
Hello, when I followed long, when i click the fill button, my design looks like rat nest, can you help me please
Best bet is to save your BE file and send to support with your questions. Digitizing is art. There could be 50 things causing the situation.
Http://embrilliance.com/contact-us-2
@@Embrilliance Thank you, you are right digitizing is art. That is why I love it so much, I am not going to learn it overnight, but for sure figure it out. I will try that and email them. :)
@@Embrilliance Thank you :)
Can stich artist level one digitize photos and logos (eps , jpg files) ?
There is a great overview video as well as beginner info on this page. www.Embrilliance.com/start
Yes, it is digitizing software to create embroidery designs from jpg files. EPS is not supported.
Did they split out some of the features in Level 2 into Level 3? I'm seeing that SVG support is no longer in Level 2 and only in Level 3. Seems like a recent development given that this video was uploaded in January of this year.
dang, really? do I have to buy level 1 and level 2 before I buy level 3?
No, SVG is still part of level 2.
You can purchase StitchArtist L3 completely. Upgrades are available to those that have purchased an earlier level so that they do not have to purchase twice.
Can you make an applique out of a shape
Sure! Assign the applique stitch type.
im digitizing a logo and the first step for me is to make a square but the lines wont go straight....i hope you could help me what to do...thanks!
Check out the draw with points videos to see how to use the SHIFT and CTRL keys to change your nodes as you draw.
Hopefully someone can help me... How do you get the scroll bars on the top and side of your 'work' area?
did you ever find out? i need help with that too lol
How do you scan your drawing into your laptop in the first place
Using your scanner software or taking a photo and transferring it to your computer.
I would have liked to see the finished boat
check the link in the video description :-) Not only do we give you the graphic files, but you get the BE files to look at in your software! The stitchout of both is shown on the opening scene of the video.
Can i add a jpeg fr the internet and digitize in level 1
Yes! There is a great overview video as well as beginner info on this page. www.Embrilliance.com/start
how do you turn it into a pes file?
This video shows you exactly how to create a PES file from a graphic!
I don’t have a “create” button 4:23
@@PinkFridays then you need to add your StitchArtist serial number and restart the program. If you need further assistance please reach out to support. Http://embrilliance.com/contact-us-2