Hi, the pinion is loose on the 1/3 gear reduction output shaft. There is no lock screw as well. How did you work around this problem? The pinion is 10 tooth standard. Did you buy another pinion?
Thank you for watching! Regarding installation, there is no problem with a normal motor. However, since the normal motor has around 50 turns, installing a 1/3 reduction gear will slow down the speed. The machine in the video uses a motor around 30T.
Thank you for watching. In the following video (around 1:50), it is running at full throttle. The specification motor is 33T. ruclips.net/video/-uwWBwvYXFo/видео.html
Thank you 👍
Thank you!!
Great Job ! from where did you buy that gearbox ? it fits really well
Thank you for watching.
You can purchase from the link below.
s.click.aliexpress.com/e/_DeFMvNj
Hi, the pinion is loose on the 1/3 gear reduction output shaft. There is no lock screw as well. How did you work around this problem?
The pinion is 10 tooth standard. Did you buy another pinion?
Please use LOCTITE 601 between pinion gear and shaft. After fitting, let it dry for about 24 hours and it will be firmly fixed🦾
If i use orignal moto zp1007 can install reduction 1/3 moto ?
Thank you for watching!
Regarding installation, there is no problem with a normal motor.
However, since the normal motor has around 50 turns, installing a 1/3 reduction gear will slow down the speed.
The machine in the video uses a motor around 30T.
Can u give me link motor 30T u use in zp1007 fj.
And can use reduration gear without upgrade esc servor n remote ? Still kan use 1/3 reduction
How fast can it go with the new gearbox ? you have any video showing that ?
Thank you for watching.
In the following video (around 1:50), it is running at full throttle.
The specification motor is 33T.
ruclips.net/video/-uwWBwvYXFo/видео.html
Next video speed test
speed test result in new video.
D mna nak oder gearbox?
you can get the gearbox follow link 😎
s.click.aliexpress.com/e/_DFRUHRR