Most of the errors are from the throttle. Just keep adjusting the throttle position if something changes. Please do this before you throw money away. I just did that to fix my 1x long and 4x short beeps.
Thanks for your comment, always new one is better than used one, if you watch better you will notice that the motor was fixed before. If you know better, you can make videos, youtube is an open platform for everyone. Regards.
Mine was giving me 1 short 4 long beeps, but it wasn't the throttle (thats error 14) but then I opened the battery cover and the main board was flashing 1 long 8 short, and that's error 18 (hall sesnsor failure) so I checked the motor and there was 2 cables short circuiting, fix it and proceded to check the hall sensors, one of them was acting weird, so I replaced all the 3 sensors with new ones, i still need to put everything back together and I will test it tomorrow and post the results.
I have an xprit that turns on beeps several times but won't move when throttle is pushed is it a control issue or a motor issue trying to learn the self maintenance any help would be appreciated
Hi there great tutorial watched it an was hoping you could help mine make same beep turns on no power when I accelerate it make that beep an won’t turn off is this the same as in ur tutorial and does that mean I need to change the motor not the motherboard hope to hear back from you thanks 👍🏻
If beeps exatly the same thats motor failure(follow beeps carefully,first long beep is first number, short beeps second number that tell us the error code) or it can be some broken wire is, check firstly motor wires before replace.
I have the xprit electric scooter (Walmart Verizon of the (xiaomi pro)it says error code 8, it won’t let me drive and the front tire drags and makes a bunch of grinding noise when I just move it. New tire/motor or what do I need to do?
My xaomi pro 2 only goes 5km makes and it wont go f very far it makes a grinding noise I took it apart put bolts on properly still does that don’t know what it is
Good video. I have a Hiboy electric scooter and the battery is full but doesn’t run, the display is turned on but when I press the acelerador nothing happens. any suggestions what’s the problem?
Mine has beeping Problem too, One long beep, Two short beep, Don't know which error code is it doesn't show on screen, could you please tell me what's the problem?
My scooter dashboard just has 2 red lines the beats were the same and when I took off the motor it was burnt I have now replaced it and it still has da same red lines and it won't move y?
My scooter turns on and the battery light meter lights up. The battery pack tests at full voltage and has a blue light blinking. The controller has a solid red light. There is no beeping, no flashing, nothing telling me any errors. I ordered a different controller thinking it was that and it does the same thing. The scooter just does not move when accelerator is pressed. Any clue what is wrong ?
Hi I’ve got a the same scooter and every time I go to turn on the scooter I get 2 white flashing lights on the screen not allowing me to turn the scooter on to use it, only to see the lights. Any ideas??
@@SpeciFixx hi I've taken mine apart as the video I've noticed the wires were all broken round the wheel. Is there a loom to boy or is tagt still a new motor. Also has no power now. On inspection the brown cable near battery had signs of burning.
Most of the errors are from the throttle. Just keep adjusting the throttle position if something changes. Please do this before you throw money away. I just did that to fix my 1x long and 4x short beeps.
Thank you! You saved me 💗
What do you mean with the throttle ?
@Jalal Boston same what do I do now?
Replacing motor is not a fix! Replace hall senzors and do not throw money from window..
Thanks for your comment, always new one is better than used one, if you watch better you will notice that the motor was fixed before. If you know better, you can make videos, youtube is an open platform for everyone.
Regards.
True mate. Ppl like to throw it away
I have the same problem can you help me how to fix it
@@SpeciFixx hi what is the error e16
M365 doesnt have error 16.
Mine was giving me 1 short 4 long beeps, but it wasn't the throttle (thats error 14) but then I opened the battery cover and the main board was flashing 1 long 8 short, and that's error 18 (hall sesnsor failure) so I checked the motor and there was 2 cables short circuiting, fix it and proceded to check the hall sensors, one of them was acting weird, so I replaced all the 3 sensors with new ones, i still need to put everything back together and I will test it tomorrow and post the results.
Did it work for you to replace the hall-sensors? Do you have a link to buy?
Hi my name is Andy his name is John and I know him and he gave me the scooter but it not working it won’t go so do u know how to fix
I have an xprit that turns on beeps several times but won't move when throttle is pushed is it a control issue or a motor issue trying to learn the self maintenance any help would be appreciated
Yea same
Me too, it might be the brakes
Hi there great tutorial watched it an was hoping you could help mine make same beep turns on no power when I accelerate it make that beep an won’t turn off is this the same as in ur tutorial and does that mean I need to change the motor not the motherboard hope to hear back from you thanks 👍🏻
If beeps exatly the same thats motor failure(follow beeps carefully,first long beep is first number, short beeps second number that tell us the error code) or it can be some broken wire is, check firstly motor wires before replace.
I have the xprit electric scooter (Walmart Verizon of the (xiaomi pro)it says error code 8, it won’t let me drive and the front tire drags and makes a bunch of grinding noise when I just move it. New tire/motor or what do I need to do?
I CHANGED FOR A NEW MOTOR AND STILL THE SAME 8 BIPS, WHAT SHOULD I DO?CAN U HELP ME
Could be the mother board. ruclips.net/video/8J3bAgIgmRo/видео.html
My xaomi pro 2 only goes 5km makes and it wont go f very far it makes a grinding noise I took it apart put bolts on properly still does that don’t know what it is
Good video. I have a Hiboy electric scooter and the battery is full but doesn’t run, the display is turned on but when I press the acelerador nothing happens. any suggestions what’s the problem?
İt can be Acceleration sensor or controller.
Mine has beeping Problem too, One long beep, Two short beep, Don't know which error code is it doesn't show on screen, could you please tell me what's the problem?
which model scooter you have ?
@@SpeciFixx Pure Model M365 ?
@@tamimnasrat error 12 -motor current sensors calibration error
Hi my scooter just beeps continuously and 02 is displayed any suggestions I’d greatly appreciate it
Did you find a solution I have the same exact problem?
This is not fix..this a waste of money
What about error 14, (1 long beep and 4 short)? How do you fix it?
Acceleration sensor reading is abnormal.
I do have the same could u help me with it plz
@@SpeciFixx can u explain it please
@@pretty996 Thorttle problem, replace.
hall sensor price one dollar.... full motor replacement how much?!!!!!!😅
I have E7 error I managed to remove the front wheel and find a replacement but I don’t know how to remove the cable of the original wire
You need to remove bottom cover where is mainboard, and unplug the motor cables and remove the wheel.
@@SpeciFixx yes however the wire wouldn’t come of when I pull it from the motor
Error 18 is hall sensor and or the cables going to the motor are broken and disconnected
My scooter beeps 1x long and 5x short i tried switching brake plates but it didnt help anything. If u know anything let me know
Error 15 - Throttle and brake errors
@@SpeciFixx how do i fix the brake one
Do you have a link to where I can buy the motor
Aliexpress
My scooter dashboard just has 2 red lines the beats were the same and when I took off the motor it was burnt I have now replaced it and it still has da same red lines and it won't move y?
what kind of scooter do you have, what do you mean 2 red lines, does it sounds any beeping from your scooter?
@@SpeciFixx xiaomi pro it was 1 long beep followed by 8 short beeps there is 2 horizontal redlines
@@simplyelite7063 Fault code 18 - Hall sensors error
How can i know the error code. My m365 has the same problem. 1long beep and 4 short. What should i do? Please help me.
Acceleration sensor reading is abnormal. Replace the accelerator.
In this case if the censor is not working the scooter will not charge as well?
I have error 18 problem I need fixing soon as
when you disconneect the motor does it make the same error? I've got this error and want to be sure before buying a motor as I had a small crash
mmmhobnobs no but it makes no noise if i disconect the handel
Jjs
Remove the baclgrpund noise. Wpuld be better
My scooter turns on and the battery light meter lights up. The battery pack tests at full voltage and has a blue light blinking. The controller has a solid red light. There is no beeping, no flashing, nothing telling me any errors. I ordered a different controller thinking it was that and it does the same thing. The scooter just does not move when accelerator is pressed. Any clue what is wrong ?
it can be throotle error.
O pneu da frente esta ao contrário
can someone please tell me what is the 10 error fix ?
what type of scooter ?
@@SpeciFixx xiome pro 2
@@daihatsu7900 BLE module communicaion error (not confirmed)
Hi I’ve got a the same scooter and every time I go to turn on the scooter I get 2 white flashing lights on the screen not allowing me to turn the scooter on to use it, only to see the lights.
Any ideas??
Same
Try to update firmware with xiaogen
How do you fix E-3 error ? Please help
Me to
Same for me…
I need help dose this actually work please help
I have E3 error 😭
Same, how to fix?
How do i fix the error code one the es2 V2 error code E-1 😭😭😭
What producer have the ES2 V2?
You manage that at esV2 already ??
@@StealthyFox_83 producer is ewheels.no
U dont fix it. Just replace the motor. WTF
Mine still beeps know what it is?
its broken :)
to żadna naprawa. Wymiana koła na nowe . Nie wnosi nic w temat naprawy
Error 13 or 31 po...
I have same problem error 18 what am i suposed to do?? Please help mee
You have all you need on the video.
So i have to change motor? When error 18?
I have the same problem☹️
@@shamsiyataliverdiyeva3869 yes if the error is 18 its something wrong with the motor. maybe some wire is broken check wires before changing motor.
@@SpeciFixx hi I've taken mine apart as the video I've noticed the wires were all broken round the wheel. Is there a loom to boy or is tagt still a new motor. Also has no power now. On inspection the brown cable near battery had signs of burning.
How to fix this? 21 error
Communication error with the BMS, something with battery bms or controller
I have E1 error and E5
Where do you buy the motor can i get links please respond
Moral of the story don't buy an electric scooter
e10 error please
Communication with the panel is anomalous.
midjo a sta ako nemam motor
.