The dart measurement for bust 46 while pattern is on fold is ( 1.75" for the under bust ) and { 1.25 for the above chestline) That way went the pattern is open (not on fold) there will be wider dart intake to create a bigger room for the cup size. Hope this helps?
I'd say it depends on the preferences of the neckline measurement. If you're talking about the shoulder measurement, then let it be based on the person who's wearing the outfit
Yes, It would be fine. Just that you would need to draft it separately.( skirt pattern and top). You might need to reduce the length of the top .just play around with patterns
Beautiful tutorial ma"am. I was going to ask if the yoke won't be bulky at the end of the sewing considering the over bust tightening that you did... You did take out any dart at the yoke part ma"am
You're very observant and made a point there. To prevent the yoke from being bulky, you will need to reduce the sides by 0.5" or 0.75", that way the yolk will lap perfectly around the chest line. I only discovered this issue after sewing but I later fixed it by the way. I'm glad you asked
1. To get your dart measurement, use your bust span or nipple-to-nipple measurement. If you don't know how to get your nipple-to-nipple measurement, just place your tape rule from one nipple to the other, and divide what you get by 2. ( example n-n =8" ) 2. Now you'll be using the answer you got above to get your dart intake. Just place your tape rule on the center front of your pattern and mark the answer you got in (1) above. Was this helpful.?
Click to watch the part 2 of this corset top:
ruclips.net/video/qPf0eN5IyRY/видео.html
Excellent job!!!
I love it ❤❤❤❤❤
Thank you.
You're always welcome
Nice one dear
Thanks a lot 🙏
Thanks mum God bless you
Always welcome
Please the armhole are you going to use across back for that Or
You just got a new subscriber 🥰
🙏
Pls what should burst 46 mark on the dart . You are good in teaching
The dart measurement for bust 46 while pattern is on fold is ( 1.75" for the under bust ) and { 1.25 for the above chestline)
That way went the pattern is open (not on fold) there will be wider dart intake to create a bigger room for the cup size. Hope this helps?
Nice one
When will you upload the part 2
Please what was the inches for the dart because you said 1/2 then 1 inch but you displayed 2” so I am confused
I'm so sorry 💔 about that. I made use of 2" there. This is because I want my bust dart to be contoured
Please okay..thanks so much for replying. so I will use half inch at one side and 1 and half at the other side right?
@@amaserwaaamoako3330
Please o
Is it one inch at both side
Easy to follow.👍💯
Please is there any need to reduced the shoulder wideness
I'd say it depends on the preferences of the neckline measurement. If you're talking about the shoulder measurement, then let it be based on the person who's wearing the outfit
I've subscribed already. Thanks for the tutorial.
Pls I would love to make mine as a penciled gown, would it go?.
Yes, It would be fine. Just that you would need to draft it separately.( skirt pattern and top). You might need to reduce the length of the top .just play around with patterns
Beautiful tutorial ma"am. I was going to ask if the yoke won't be bulky at the end of the sewing considering the over bust tightening that you did... You did take out any dart at the yoke part ma"am
You're very observant and made a point there.
To prevent the yoke from being bulky, you will need to reduce the sides by 0.5" or 0.75", that way the yolk will lap perfectly around the chest line. I only discovered this issue after sewing but I later fixed it by the way. I'm glad you asked
Awwn... Thank you for your response. I am currently working on exact style but as pencil gown and your tutorial was very helpful.
@@Mo_Lynpls where are we to reduce the 0.5 or 0.75
I want to know too@@lilianchika8749
Well done ma pls how do I get the dart measurements calculation
1. To get your dart measurement, use your bust span or nipple-to-nipple measurement.
If you don't know how to get your nipple-to-nipple measurement, just place your tape rule from one nipple to the other, and divide what you get by 2. ( example n-n =8" )
2. Now you'll be using the answer you got above to get your dart intake. Just place your tape rule on the center front of your pattern and mark the answer you got in (1) above.
Was this helpful.?
Yes it is thank you
Wow God bless you more 🙏
Amen
Name please we can't wait for the part 2
Hello. The Part 2 is already there.. Just check
Please am waiting for part 2
It will be up tomorrow 🙏
@@Mo_Lyn ok tnx
I guessed they are many methods of cutting thjs 😌
Ma i love ur video, please talk slowly and steady
Thanks, Noted 🙂
You did really well @ grace_stiches
Weldone
❤
Click to watch how to make the sleeves:
ruclips.net/video/GPAPoo62TiI/видео.html
Weldon Ma
In your next tutorial please slow down a little bit. You talk too fast. Thanks anyway. I enjoyed it.
Okay.Thanks for the observation..
I'll make adjustments❤
Please you are too fast slow down a bit and show me how to sow on a machine
Oh dear am so sorry about that. I'll adjust my method.