BBK Install for a Yamaha Zuma Bws Cygnus 125 Scooter part 4/4

Поделиться
HTML-код
  • Опубликовано: 9 фев 2025
  • If you have ever considered doing a BBK install, but were not sure you could pull it off, than these videos are for you! I will take you step by step from the service book, to help you get that extra bit of power only a BBK can provide. For more experienced tuners, the videos might be a bit slow, but they still have plenty of information that will save you the headache of having to take you scoot apart or find photos of a particular component. Stay tuned, lots of great stuff planned.

Комментарии • 18

  • @shannon9487
    @shannon9487 8 лет назад

    Thank you so much for posting this! In the process of installing a 155bbk race kit from Chris @rcscooters. So pumped! I've done 70cc on my two stroke which is a good time but this one, well, they will definitely know im there with the full carbon yoshimura on the back end! Your videos make it so much easier to visualize the process when done correctly!

  • @Dynamo55b
    @Dynamo55b  12 лет назад

    No jet, this was for a Fuel Injected motor. For carb motors, it would depend on the size of the carb and the type of exhaust installed. Thank you for watching.

  • @juanmayorga8378
    @juanmayorga8378 8 месяцев назад

    Me gustaria ver como va la posicion de los tiemposy la calibrada de las punteras

  • @Floridascooterboys
    @Floridascooterboys 12 лет назад +1

    Hey bro what sup do you know what final gear can i use for my 05 yamaha zuma 70cc yw50 i want higher speed? Do i have to go lower teeth lower gear to get higher speed? 13-44 or 15-50?

  • @Dynamo55b
    @Dynamo55b  12 лет назад

    I have only seen the K&S controller in a few photo graphs. Ask the vendor for the instructions, while I look on my end. I have never use one.

  • @vwjet357
    @vwjet357 9 месяцев назад

    No hondabond needed for the gaskets?

  • @mikemurphy7105
    @mikemurphy7105 6 лет назад

    Hardest thing on a big bore kit for me is installing the 60 mm stroker crank The valves N valve Springs roller rockers and that's my biggest issue!

  • @denzlepob
    @denzlepob 12 лет назад

    What main jet did you fit for the BBK upgrade?

  • @lega6028
    @lega6028 10 лет назад

    I want to know how to install the timing chain onto the gear you didn't show that part

    • @Dynamo55b
      @Dynamo55b  10 лет назад

      Service book clearly shows how and once you get hands on the motor it all makes sense.

  • @azabanwer6480
    @azabanwer6480 7 лет назад +1

    My friend I have a cygnus x speed 110 I have a problem when walking leave the skater turns off to know where the problem

    • @azabanwer6480
      @azabanwer6480 7 лет назад

      I want to send you a video to see the problem

    • @azabanwer6480
      @azabanwer6480 7 лет назад

      I want your Facebook

    • @toussaintvandel6712
      @toussaintvandel6712 6 лет назад

      i have a 125cc yamaha cygnus flame 2004 model i am only doing 90 mph am looking fowerd to do 110 or 125 can i have some upgrade plise

  • @mikemurphy7105
    @mikemurphy7105 6 лет назад

    I have everything to make my Zuma 125 2013 A 205cc all the parts And nobody to help me install it I live in Virginia Beach virginia . What do I do??

    • @dynamousa4945
      @dynamousa4945 6 лет назад +1

      Download the service manual, then watch my videos, ask a lot of questions in the forums. I did all of this from reading the Yamaha book.

  • @Dynamo55b
    @Dynamo55b  12 лет назад

    Uhhh ehhh, I'm not a Zuma 50 guy, post the same question to the Zuma 50 section on Zumaforums,net

  • @Dynamo55b
    @Dynamo55b  12 лет назад

    Ħŧŧƥ\\mmm,ksmotor,com,tw/ You'll figure it out