Makro Gold Kruzer First Look

Поделиться
HTML-код
  • Опубликовано: 11 окт 2024
  • A run through of some of the features of the Makro Gold Kruzer, and quick look at how it runs on the ground.
    NOTE: Shown in this video are a couple of optional accessory items: 1/4" headphone adaptor cable, and GK24 9.5x5" open web coil.
    Stay tuned for more videos! phasetechnical....

Комментарии • 54

  • @snowdigger
    @snowdigger 5 лет назад +3

    Very detailed overview on the Gold Kruzer, loved watching it! ATB

  • @stephenpendegraph7209
    @stephenpendegraph7209 2 года назад +1

    I just got mine..seems really well made. Haven't been in the feild yet cuz it's only been 2 days but I have found all the foil from grilling over the years lol in my back yard.

  • @squizzygolddogtaylor7463
    @squizzygolddogtaylor7463 6 лет назад +3

    Thanks for the video Nenad!
    It doesn’t look like it’s to bad of a machine actually.
    Look forward to some more on it mate.
    Cheers

  • @CanadianGoldMining
    @CanadianGoldMining 4 года назад +1

    Just got one yesterday ....stoked...keep ya posted ...thx for the video

  • @ridewithwarro
    @ridewithwarro 6 лет назад

    hiit appears a lot more complicated to set up and run compared to the gold monster 1000. is it as good as that unit and would you mind sharing the running setting as I couldn't figure it out in the video. thanks

    • @diggingwithphasetech
      @diggingwithphasetech  5 лет назад +1

      The Gold Monster has Auto Sensitivity and Auto Ground Balance so is essentially switch on and go, but you still have to spend the time to pump the coil and give the machine a chance to tune itself in. The GB on the Kruzer is more instant, and you can hear if you are out of balance because of the threshold, you just have to push the right buttons. I go through the set-up on the video, basically: Turn on, GB, set Sensitivity, and adjust iSat if required.

  • @dataglasses
    @dataglasses Год назад

    Do you still use this? I went off it for a while and grabbed an equinox 800 but have decided I prefer the Kruzer, I do think it is better in the goldfields, and the after market coil seems to have a good pinpointer for stuff in the scoop. Cheers

    • @diggingwithphasetech
      @diggingwithphasetech  Год назад +1

      Still in the kit, but tbh doesn't get much use as the 6000 is sensitive enough. I have used it as a pin-pointer when using bigger coils on the GPZ and 4500. Also a good machine to give to my son when he tags along as it's super light.

    • @theGoldWolf
      @theGoldWolf Год назад

      @@diggingwithphasetech I guess if I had a 6000 I would be the same, with the 10x5 coil was quite happy to be able to pinpoint in the scoop, it idd do that part ok, yep being light helps with my tennis elbow and bung shoulder, thanks for your reply! Regards..

  • @armandogutt110
    @armandogutt110 5 лет назад +1

    excellent video, I have that detector but still not use it well. Would you help me with the best configuration for gold? greetings from Argentina

    • @diggingwithphasetech
      @diggingwithphasetech  5 лет назад +3

      If you are chasing small gold, use the small 7x4" coil, it is dynamite. The open web 9x5" GK24 coil is great for more mineralised soils, but fit the solid skid plate which is available as an accessory. Basically use Gen, iSat 2, and Sensitivity as high as you can tolerate. Volume on max with the wireless headphones. Threshold should always be set to a faint hum, but not too faint where it starts to break up. Check out this channel for plenty of gold action with the Gold Kruzer ruclips.net/channel/UCH0PSt-joEAbbLK-PQrzWGw

    • @shadowbanned-9577
      @shadowbanned-9577 5 лет назад

      Rad..Thanks for the question as I had the exact same in mind...(And Thanks for the answer/link..Nenad😉👍🏻)

  • @goldfools5445
    @goldfools5445 4 года назад

    Hi Nenad.
    We have SDC, 7000 and a monster. We love the first two but as much as I try I can’t get to enjoy using the monster.
    Sometimes I want to climb through creek beds and gullies so a very light detector is all I want, when looking through rockbeds and banks. Do you think the GK would be better than the GM or should I forget VLF altogether.
    We are in WA eastern goldfields so really mineral soil.
    With the GM I can’t distinguish my test nugget from the other sounds on manual and on auto, I loose it. What do you think?

    • @diggingwithphasetech
      @diggingwithphasetech  3 года назад +1

      In really high mineral soils, all VLF's can struggle. Have you tried a very low manual Sensitivity setting? The Gold Kruzer has a couple more fine tuning options at its disposal like iSat when in all-metal, or when in one of the Disc modes (Fast would be best in mineralisation) you have an iMask setting which is like a ground filter. But there is still a limit with VLFs, and sometimes the ground can be too much.

    • @goldfools5445
      @goldfools5445 3 года назад

      @@diggingwithphasetech
      Great reply. Sounds like I should just stick with the SDC for creek work.
      I always thought that sometimes the ground is just too hot for the monster.
      I have been told many times that I just don’t know what I’m doing.
      As you are probably one of the most knowledgeable in the industry, I take your comments with respect. 👍

  • @dataglasses
    @dataglasses 2 года назад

    Have you tried the aftermarket coil on the Boost Mode at all? If so, how did you go? Thanks

    • @diggingwithphasetech
      @diggingwithphasetech  2 года назад +1

      No haven't done a lot with boost, except for in bark chip playgrounds. I find it a bit too chatty in the goldfields.

    • @dataglasses
      @dataglasses 2 года назад

      @@diggingwithphasetech Interesting, thanks!

    • @diggingwithphasetech
      @diggingwithphasetech  2 года назад +1

      I have occasionally used Boost to check a suspected signal that I get when searching in Gen mode, but just as easy to scrape a bit of dirt off and recheck. But that can work well in rocky terrain.

    • @dataglasses
      @dataglasses 2 года назад

      @@diggingwithphasetech Thanks Mate

  • @geojoe5325
    @geojoe5325 6 лет назад

    Is it as sensitive as the Minelab Eureka Gold? I used to constantly find sub grain pieces of gold the size of a pin head with the regular DD coil and always hunted in boost mode. I noticed the detector stays silent when you bump the coil on a rock, unlike the Minelab. Why did you change coils?

    • @diggingwithphasetech
      @diggingwithphasetech  6 лет назад +1

      Very sensitive to tiny gold. The Eureka Gold had 3 frequencies, so the coils had to work on all three. The Kruzer is all about sensitivity, so all coils are optimized for 61 kHz. Yes, it is very good when bumping rocks, but will still ping off if you hit something hard enough - this is just the nature of high freq VLF machines. The footage was recorded on 2 different days due to my camera running out of memory. I was in open ground, so I wanted a little more ground coverage.

  • @republicofcasuals
    @republicofcasuals 6 лет назад

    Hi Nenad, I am looking to buy a larger coil for my GPX 5000 and would love a expert opinion on what coil to get. I currently use the 11" commander mono and a 15" commander eliptical i never see people using them these days tho. I have been looking at a Nugget Finder 19" Round Evolution Spoke Coil but still unsure as it's a big purchase at almost $600. I work fairly heavy mineralised ground so a coil that can punch deep in hard conditions is what i am after. Cheers Nick :)

    • @diggingwithphasetech
      @diggingwithphasetech  6 лет назад

      The Commanders are still good coils. They just don't hit as hard as the new flat winds, but you just have to push the settings a bit harder as they do handle the ground very well. The 5000 and 19" Evo is a great combo. See my video here: ruclips.net/video/KDNEcNXJDmc/видео.html

  • @elchonterdetector4817
    @elchonterdetector4817 5 лет назад +1

    hello good night, very good videos, I have the same detector (Makro Gold Kruzer) and I wanted to ask you if you would be so kind to share your settings with me for the search of nuggets, thank you very much and greetings from Argentina.-

    • @diggingwithphasetech
      @diggingwithphasetech  5 лет назад +2

      Hi Walter, I like Gen mode, iSat on 2 or 3, Volume on Max with the wireless headphones, and Sensitivity as high as the ground allows before you start getting excessive false signals. I also like to use the headphone adaptor and wired headphones as it gives a much more powerful output, so turn the volume down to a nice level. Fast mode also works well where you wish to reject iron. Best of luck with your prospecting!

  • @shadowbanned-9577
    @shadowbanned-9577 5 лет назад +1

    Rad...
    Digging My Gold Kruzer!...

  • @queenjane7054
    @queenjane7054 6 лет назад

    What's the Depth of finding Gold. Thanks ??

    • @diggingwithphasetech
      @diggingwithphasetech  6 лет назад

      That's a very simple question, but unfortunately doesn't have a simple answer. Have a read of this to give you a better idea: www.quora.com/How-deep-do-most-metal-detectors-go

  • @billpetty5081
    @billpetty5081 5 месяцев назад

    How much is this .

  • @charlesmambourg4447
    @charlesmambourg4447 2 года назад

    "Hot Rock" was a terminology given to the failures of the original VLF/TR detectors.They would sound off ghastly on rocks and ground that contained no metalic mineralization. More than %60 of the gold on earth is fluxed with other metalics and is less than %40
    pure. That is not "hot rock" even though some detector manufactures call it that. Nokta Makro is not one of them. You have to crush, pan and burn or heap leach. Mining instructions are usually not included with the metal detector.

    • @diggingwithphasetech
      @diggingwithphasetech  2 года назад +1

      Not sure about overseas, but everyone in Australia still uses the term hot rock. Also, most of our gold that's detected here is well over 90% pure. In South Australia a lot of our gold has a high silver content but it would still be 70% gold if not more. There are some areas here where the gold is reported to be close to 98% pure.

  • @kevlast3682
    @kevlast3682 3 года назад

    Kicking the ground with your boot, ha ha. Dont over do it mate! :-)

  • @Prince-nt4dc
    @Prince-nt4dc 4 года назад

    This not a GB of this metal detector. There's manual asual

    • @diggingwithphasetech
      @diggingwithphasetech  4 года назад

      The Gold Kruzer has auto balance, manual ground balance and Tracking.

    • @Prince-nt4dc
      @Prince-nt4dc 4 года назад

      @@diggingwithphasetech there is no video anywhere on how to make a manual GB

    • @Prince-nt4dc
      @Prince-nt4dc 4 года назад

      @@diggingwithphasetech what program do you use for gold? i have the same detector and i think i can't tune it properly.

  • @Sneaky-Sneaky
    @Sneaky-Sneaky 4 года назад

    Mine is running Great.....somewhere in the motherlode .....

  • @keyboardkowboy
    @keyboardkowboy 3 года назад

    You don't have to listen to all that noise all day put it on boost and gb and your fine.

    • @diggingwithphasetech
      @diggingwithphasetech  3 года назад

      I prefer a threshold when gold prospecting, unless in super mild ground.

    • @keyboardkowboy
      @keyboardkowboy 3 года назад

      You don't trust discrimination?

    • @keyboardkowboy
      @keyboardkowboy 3 года назад

      Mabye I should hunt in all metal more but I'm so sick of trash I've found a lot of gold in boost but I'm on a dry spell atm.