Mini chainsaw unboxing, assembly and demonstration

Поделиться
HTML-код
  • Опубликовано: 8 окт 2024

Комментарии • 35

  • @corumhayes8178
    @corumhayes8178 Год назад +2

    2:35 You skipped over the part where you actually put the guide plate on the saw which is the part I'm having trouble with. May want to think about showing how you accomplish everything in the future.

  • @paulb6394
    @paulb6394 3 года назад +1

    I bought this same mini chainsaw recently - only mine came already assembled, and with a hard case. I got mine i n Goth Black. Used it only once so far…..so good!

  • @pnp3894
    @pnp3894 3 года назад

    Finally someone who knows how to use a chainsaw:)

  • @lauwe54
    @lauwe54 2 года назад +1

    thanks great video orderd one and its arriving in morning.

    • @thermonuclearpotato
      @thermonuclearpotato 2 года назад

      Thanks! Mine is still going strong. I don’t use it daily, but it’s always been ready to work when I need it.

  • @M319-n3l
    @M319-n3l 13 дней назад

    I brought a mini chainsaw and it was a waste of money. I wish I would have waited to get something with more power.

  • @godsgirl1439
    @godsgirl1439 2 года назад +1

    That was a great demo

  • @jeffhamlin4214
    @jeffhamlin4214 Год назад

    Where do you connect the battery charger!?

  • @spumante3
    @spumante3 3 года назад +2

    Just got a mini and would not cut. You mention the chain and I had to turn the chair around. thanks for video. raleigh, north carolina

  • @venkataramanaupadhya5277
    @venkataramanaupadhya5277 2 года назад

    It looks 4inch bar projection?

  • @bobfurlong5195
    @bobfurlong5195 2 года назад +1

    Time stamp 2:50........plugs in battery, pulls the trigger with his thumb an inch away from a brand new spinning chain and says "Oooh, it does have charge". Que faceplant.

  • @KunnAllu
    @KunnAllu 2 года назад

    Do you need to oil it before use? How many times do you need to oil it?

    • @MichelangeloFlores
      @MichelangeloFlores  2 года назад

      Yes. Often.

    • @KunnAllu
      @KunnAllu 2 года назад +1

      @@MichelangeloFlores Thanks. Kinda scared, im new with those type of tools, but wanted to try so hard. I hope everything goes well.

    • @MichelangeloFlores
      @MichelangeloFlores  2 года назад +1

      @@KunnAllu larger chain saws have oil reservoirs that you can watch and see how much is used. If you’ve never used such a tool it it best to oil every time you pause.

    • @KunnAllu
      @KunnAllu 2 года назад +1

      @@MichelangeloFlores Thank you for teaching me. I will buy at some point a bigger and larger chainsaw too. Could you maybe do a small video to teach how to do the correct oiling for the saw, i could watch and learn then. Is shrubing with the thing U used an efficient too? Does it need to be specific oil or could i use cooking oil too?
      Thank you.

    • @MichelangeloFlores
      @MichelangeloFlores  2 года назад +1

      @@KunnAllu sure. Perhaps this weekend. I bought a small oil can for this purpose. It’s not perfect, but it will give you an idea of how to proceed. Stay tuned.

  • @ktm65ccsx89
    @ktm65ccsx89 3 года назад +2

    Do you need bar oil

  • @yaacoubnajah564
    @yaacoubnajah564 Год назад

    👍🏻👍🏻💵

  • @MarcGrayTWOOM
    @MarcGrayTWOOM 2 года назад

    Helpful thanks 😊

  • @mixedgraffiti62
    @mixedgraffiti62 3 года назад

    Does your chainsaw overheat at all?

    • @MichelangeloFlores
      @MichelangeloFlores  3 года назад +1

      I don’t think that the motor can handle heavy use. It does stop after a few minutes of constant usage and will start working again after a couple of minutes.

  • @Pro1er
    @Pro1er 3 года назад

    Is that a 4" or 6" bar?

  • @elvenezolanoloco
    @elvenezolanoloco 2 года назад

    Hey man! Afternoon! I have a question, I just bought one this chainsaw and I put it charging right away but the instructions says that once it is connected to the power supply must be a red light until it turns green but mine it's just green and it's on and off. Can you or anybody help me!? Please! I bought it from Amazon and brought it to Venezuela.

    • @MichelangeloFlores
      @MichelangeloFlores  2 года назад

      Hmm. If the charger light is green then the charger is probably “good”. Try running the saw for a while and then plug the battery into charger and see if you get a red light. My batteries both had good charge when they arrived. I hope this helped and be safe while operating. Mine is still working well. It is time to trim trees and this little tool is very useful.

    • @elvenezolanoloco
      @elvenezolanoloco 2 года назад +1

      @@MichelangeloFlores I think maybe changing location may affect the charge coz the US and Venezuela works on different type of power or i don't know. What I do now is leaving connected over the night and tomorrow use it on my backyard. If you have any other solution or comments regarding what could possible be, please I'll be very appreciated 👍. Thanks a lot.

    • @Юра-ш6ь4г
      @Юра-ш6ь4г Год назад

      Привет из России ! Имею такую же пилу . Пилит хорошо . Смазываю маслом автомобильным из маленькой пластиковой бутылочки . Мини пилы захватывают планету ! Ха, ха !

  • @dzmitrypasrednik2325
    @dzmitrypasrednik2325 3 года назад

    So, it works nicely with rotten wood.

    • @MichelangeloFlores
      @MichelangeloFlores  3 года назад +2

      I’ve cut some fresher stuff. I’d already finished my tree trimming for the season when I decided to order. Best to wait for the sap to recede. This was hardwood - either oak or pecan.