How to troubleshoot your Bernina 900 Nova Foot Controller

Поделиться
HTML-код
  • Опубликовано: 9 фев 2025
  • How to troubleshoot your Bernina 900 Nova Foot Controller is Part 2. in a 2 part video about the 900 Nova Foot Controller.
    Part 1: 900 Nova Foot Controller - Replace Carbon Pins • 900 Nova Foot Controll...
    ------------------------------------------------------------------------------
    900 Nova Foot Controller Connector Repair Kit
    3dsewingparts....
    ------------------------------------------------------------------------------
    More about me:
    syrep.no/index...
    My webshop:
    3dsewingparts.com
    If you want to support my work:
    / sewrepair

Комментарии • 5

  • @bryankeating8440
    @bryankeating8440 4 месяца назад

    Hey, thanks for the video. Any chance you would know where I can get a new variable resistor?

    • @sewrepair
      @sewrepair  4 месяца назад

      Are the resistor broken or do you need the carbon pins?

    • @bryankeating8440
      @bryankeating8440 4 месяца назад

      @@sewrepair carbon pins are intact. I performed a resistance test on the resistor itself, as you showed in the video, and there’s no resistance.

  • @Huckleberry500
    @Huckleberry500 Год назад

    I have a Bernina Nova 900 and the pedal stopped working. Upon inspection the carbon pins were broken, just installed new pins and still not working. I opened the plug and all the connections are intact. I will order your 3D printed plug if I can troubleshoot the pedal. I used a multimeter and tested the voltage with it plugged in at the plug, the microswitch goes from around 4.5 V to 0.00V when the pedal is activated. The variable resistor is 0.0V and when activated jumps to about 3V and then drops to around 1.5V. Any suggestions on what I'm overlooking?

    • @sewrepair
      @sewrepair  10 месяцев назад

      Check the variable resistor and the micro switch with measuring the resistance (ohm), not voltage. The voltages do not tell me much, sorry.