Видео

@brochanjow9169 I'm sorry that happened! I've been there before with a few pieces 😅 What I would do is remove the wax. Mineral spirits work great for dissolving the furniture wax. I don't know what color you're starting with. So if it works to create the Caribbean Shabby look, then you may not need to sand off the color. But if it's 2 or 3 coats of the wrong color all together, then I'd sand it off just so you're not left with a piece that looks thick and overdone. Now you'll have a prepped piece that you can create your specific look with! I hope this helps! I know it's a lot of prep work, but it'll be worth it when you're all done and have the piece you truly want!

@carole-x5z I've been there! I would first try to add the wax on top of the touch up areas. And once it dries, buff it in with the original finish. That will usually even it out 😊 If it still looks off, you'll have to remove the wax, even it all out with the paint and then reapply the wax. I usually use mineral spirits because it dissolves the wax pretty quickly. Then I'll do a scuff sand, thin layer of paint and then wax. I hope the first solution works so you don't have to go through all of that though! Hoping for the best! 🙌

@jailoken3479 Thank you so much! I'm so happy my video was helpful for your project 😊 Have fun with your table!! I'm sure it will turn out amazing!

@carlosx5582 yes, it does 😊

@@CoconPelu2023 Depends on where I place it and what kind of look I'm going for. Since you can use both polyurethane and furniture wax to seal gold leaf, you can do the gold leafing before and seal it all together. Hope this helps!

@maryalgar8779 Thank you so much! The grey was a beneficial discovery for me, so I was happy to share it in a few videos! It works great! 😁

@@lilacmollymoo Thank you!😊

@kayceguthrie5235 With using a protective coating and letting it fully cure to the surface, it holds up really well! Still have the hardware from this video and there's been no flaking 😊 They look great!

It doesn't, for a huge number of reasons. Firstly, there is very poor adhesion to the metal (drawer handle). Secondly, this type of adhesive stays soft indefinitely and therefore remains vulnerable.

@rodneyreeves9434 That sounds amazing! I love creative ideas like that! You can keep going with the cross hatching and adding layers of paint/color for more depth. I did a simplified version for this tutorial. Also I'd recommend looking at older books with painting techniques. I find all kinds at thrift stores. There is a wealth of knowledge and ideas in those pages that may help you with your denim roller or landing on a technique that's closer to what you're after. If you do get that denim roller to work, I'd for sure patent that! Such a cool idea!

@jeannedelooze1036 Great attention to detail! They look it, but it's just shiny. They were made in the 80s, so it's that slick veneer cover over the fake wood.

@@Imana23 Yes, mod podge will work for sealing 😊

@@ledzepgirl299 Thank you!

@@01celesta That's wonderful! 🙌 I'm so happy my video was helpful for you! 😁

Yes, that will work fine 😊 The finish isn't much of a concern regarding getting the gold leaf to stick. It's more the type of glue. The only time finish matters is when you are applying it as a sealer/ top coat. And then it's just personal preference 😊

@@Happyspacediys thank you.

Hi there! Great question! The Krylon spray paint should be perfectly fine as a base for your gold foil. However, make sure the spray paint has fully dried. If it's still "sticky dry" the foil will be more difficult to work with. Hope this helps! Thanks for watching 😊

That makes me so happy! Thank you for watching and taking the time to comment 😊 I hope your dresser turns out amazing! Have fun! ❤️

Hi! It's Stormy Seas by Dixie Belle Paint Company 😊 I have a link to it in the description box. The trim is their Vintage Duck Egg. Have fun! 😁

That would be fun and creative! Hope it turns out well 😊 Have fun with it!

Thank you! 😁

I used baby powder. Corn startch works as well!

I used a polyurethane top coat. I believe the brand was Varathane. However, any polyurethane top coat will work just fine. You can also use furniture wax as well if you don't like polyurethane 😊 Hope this helps!

Yes, of course!

Great question! It's a mixture of paint and water. The ratios can differ, affecting the pigment of the wash. You apply it to dried paint, sanded wood, or other surfaces. And as you start to wipe it back, it leaves a light layer of color. It's fun to play around with! You can also use a few different washes to ad depth and interest. Thanks for your question! Hope this helps!

@@Happyspacediys thank you. I never heard of this before your video. It intrigued me and I started watching other videos about this technique. Thanks for the response. ☺️

I'd love to do an updated ombre tutorial! I'm currently in the process of healing a back injury and getting ready to move. There are a few older ones on the channel. A blue chest of drawers and a light pink vanity. You can see the blend better on the blue piece. Unfortunately, the pink one doesn't show up well because I'm blending it with white.

I hope this information finds you in a better head space. 1st, If you were to look up blue prints for building a coffee table and an ottoman, there are a lot of similarities. Also, to your point, some ottomans are structurally unimpressive, just as coffee tables can be. To avoid acquiring such flimsy furniture, I use my experience and knowledge to inspect how the table is crafted. Thankfully, this one is all real wood, has a center stretcher along with strong corner joints. 2nd, I wouldn't put up a video misinforming viewers. I make these videos to help viewers and I literally profit pennies, if that, for doing so. I'm honest when projects are difficult, I'm honest with prices, I have no sponsors, and if a project doesn't work, I'll scrap it. Lastly, I understand viewing a video through a negative perspective can lead to the desire to be... well... negative and further your burning need to prove a point. However, might I suggest a bit of research prior to a comment like this. I mean, if you think you're right, you should back it up with the correct knowledge. I'll go ahead and like and give you a heart because I do appreciate your comment. It allowed me to explain to my viewers and you some valuable information. And who doesn't like to learn something new every day? Therefore, random internet person, fear not! Your time and comment were not in vain. I hope you are having a better day, and thank you for watching my free video!

My coffee table is 25 years old and can easily support 4 adults 😆 I’m excited to try this project! Two years behind but still appreciate the video.

Thank you for watching! 😊 The base paint is a Berh Chalk Paint, and the top coat is a Satin based polyurethane. I've used gold leaf on lots of varieties of paint bases, and they all seem to hold up great. You can use polyurethane or clear furniture wax as a top coat. I haven't had my gold leaf dull when using those products.

Yes! So many uses! Even on smaller DIYs like picture frames and candle stick holders, etc! Mod podge works great! You can use a thin layer as a top coat too! Have fun with your gold leaf 😁✨️

Thank you so much! I'm glad it was helpful for you! 😊

You're very welcome! Thank you for watching! 😊

Thank you! I really enjoyed this technique 😊 Thanks for watching!😁

Thank you!

Thank you!

I would use a few coats of polyurethane in satin or semi gloss to keep the shine of the gold leaf while giving it durable protection. Hope this helps!😊

You're very welcome! I'm happy you enjoyed the tutorial 😊 Thank you so much for watching and leaving such a kind comment!❤️

Hi Emily! For this one, I did not sand the jewelry box. I did wait a day for the primer to adhere, which helps when continuing on with paint. You are correct about the process though! I usually sand, clean, prime and paint. 😊 Thanks for the question and watching! ❤️

Thank you so much! 🩷

Thank you for watching! I appreciate the comment 😊

For these, I cleaned them and then gave them 2 coats in gold spray paint 😊

My guess, gold leaf is the more popular choice. There are some that use silver and other colors. Gold leafing has a history in art and decor and has been elevated in that sense too. For me, it's what I bought to match the colors I have for projects. It would be fun to try other colors out 😊

Me too! 😊

I appreciate it! 😊 Thank you for watching!

I'm so glad that through my videos I've been able to help you! That's why I make them. In hopes of helping those who need answers to all the questions 😅 Thank you so much for subscribing and taking the time to leave such a lovely comment ❤️

@@Happyspacediys if I have any concerns or questions when I do the leafing on a small table, just comment here?

@indygrammy Yup! I get notifications sent to me when someone leaves a comment. Thankfully, I'm a small channel! So I can receive and respond pretty quickly if you're in a pinch or have a few questions on your project 😊 I'm here to help!

I love this so much! This is why I make these videos 😁 I'm so happy I was able to help with your exact question. That's just awesome! Happy gold leafing! 😁✨️

🤣🤣🤣🤣🤣 tell me how you really feel 🤣🤣🤣🤣

Thanks for the input. I guess don't finish the video??🤷‍♀️

That's hardly surprising. With all due respect to the presenter, gilding cannot be taught in 10 minutes. In fact in Germany it is a 7 year apprenticeship! Here's some tips from a trained gilder of 30+ years. 1. Oil size (adhesive) gives the best results. 2. The longer you leave the oil size, the better the Finish.(Acrylic size dries only by evaporation rather than oxidation and will remain soft indefinitely. 3. Adding a small amount of colour , artists' oil colour to oil size, artist acrylic to acrylic, will not effect the outcome but will make it easier to see where you are applying the otherwise translucent size (adhesive). 4. Thinning acrylic size with a little water will enable a much thinner coating and less soft, rubberiness later. 5. The term 'gold leaf is very misused: genuine gold leaf comes normally in booklets of 25 leaves, either 'loose or 'transfer'. Our presenter was using transfer in one instance. She was, however using imitation leaf, actually brass leaf sometimes called Dutch metal. Genuine GL is 83mm square and is 8+ microns thick: incredibly thin! DM is machine rolled and much thicker, and much cheaper. Genuine gold leaf is and beaten and costs about $50 a book ( unless you buy lots). Imitation leaf is very cheap! Real gold will never stain or corrode and is only as good as the substrate. This is what is used on exterior statues, monuments etc. Imitation leaf whilst easier to handle with fingers, will tarnish, especially if it is not lacquered, but even if it is. Real gold leaf should generally only be manipulated with a 'gilder's tip', a small flat, squirrel-hair brush. 'Skewing-off', the process of removing the surplus gold, should be done with a 'mop', a soft brush similar to a make-up brush. Although for Dutch metal and other stiff leaf such as aluminium leaf, a 4" foam paint roller works better than a brush. A roller with the minimum amount of size will also work better for stencilling where 'creeping is always hard to avoid. Acetone will remove ALL paint, not just the size. Methylated Spirits (ethyl alcohol), works best for acrylic size, and turpentine or white spirit/mineral turpentine for oil size. Underpinning before sizing, with a colour like yellow ochre or red, will disguise or enhance respectively, misses in the leaf. Perhaps this helps.