Видео

Great video. Much appreciated. I have the ccp software updated to 2021. I want to download the ccp file off my mx-980. The device was originally programed by a dealer, possibly with a newer version of the software. Since I'm using an older version of the software, will it change the file or possibly corrupt the mx-980?

How can I get a copy of the software?

With my MX-1200 URC remote with Crestron processor and its RF-418 gateway

41Hi, Hope you are doing well? Actually i am using the Crestron system CP3 with Gateways RF-418. Trying to communicate but found no communication .Could you please help to fix this ?

great video!! can you tell me how to program if I want my av receivers volume to turn on to say 40 when I run a macro? Thank you again for the awesome video!!

Lovely work, we have got something for you🙂

Is there a way you share the software? URC said no

Marvelous explanations!!! Do it more! This is the best, if not the only one, tutorial on URC on web! Thanks!

Thanks for the video. Is there a camera quick connection at the bumper so the camera can be easily disconnected when the bumper is removed during maintenance/ exhaust work?

I noticed you did not respond to the question regarding "for hire" a while back. I'm interested too. This is the first URC remote for me and I don't see the Spectrum stream box in the database. The name on the box is Xumo. I'm hoping you or another reader can tell me what I should do for programming this. Is a Roku even needed with this device or should I scrap this device and just go to the spectrum app through Roku?

thank you for the video, sincerely... I work for Ge*k Sq**d, and these are supposed to go to our custom teams but I have had 4 URC programmings where we submit a form, get back an emailed file, and "Just follow the steps, download the file, and confirm everything works" out of my first 4 programmings I have had 4 programming errors and stuck in the client's home waiting for a correction or having to reachedule... for over 1 year I have been asking my manager to allow me to ridealong to see how a programming is done so if I get a bad file, 2 devices on HDMI 3 or something else, I can make a quick correction... I have the software and login but I'm expected to just wing it. I followed along with your video with my own software and it helped, I have a URC coming up this week so hopefully it goes smooth... not stuck for 2-3 hours when they give me a 45 minute window to program a URC 🤷‍♂️ thanks again man

Timing chain death rattle?

Sounds like a partially collapsed lifter tick. The other ticking noises are the direct injectors and fuel pumps which are normal. A good engine oil flush followed by drain and high quality (Liquimoly, Amsoil, etc) may correct it.

Are you for hire?

I have a MX-990 and am looking to add an Amazon device but dont see those in the device or brand category, how would i add that?

I have the same noise on my audi s6 .. and rought engine running

How could I integrate the mx1200 in my crestron control with RF ?

Thanks so much for explaining this in detail--- what a fabulous tutorial.

@LetsDIYIt - I have the MX-990 and the CCP software. Your tutorial gave me what I needed to get it going, so thank you so much for that. I would like to import my own image to use as a button image. I created a button using one of the existing images. On the button properties, there are import and export links. I exported the current image to see what format it wanted. I created a new image using the same format (jpg). At first it said it was too large and needed to be at most 240x320. I created an image which is smaller than this and tried the import link. It seems to work, but the image on the button is never changed. Can you give some advice on doing this?

I recently bought a URC MX990. I got the software but I`m lost when it comes to using it. I did everything you showed n your video but got lost at punch through. I`m willing to pay to have it setup.

Where do you get this software?

Very thorough. Appreciate the content.

Good job. Thanks for this video!

I have about 10 devices, but only the Roku can use the RF. Everything else will not do RF. Why?

What is the replacement part where you swap the Cigarette lighter for a USB called?

I did not get a response to my post below but I have solved that problem by downloading the program from my remote. I now have two other issues to which I could use some help. Several custom icons from the uploaded programming did not transfer during the download. They appear on my remote and I have copies of all the custom icons stored in a folder on my computer. How do I transfer these images to the new version of CCP so I can add them to the the program as I move forward. (EDIT) I just figured this out. Create a folder with the custom icons that you want to be able to access in CCP. On your computer, go to C:\Program Files (x86)\Universal Remote Control, Inc\Complete Control Program\MX-890\Images, (substitute your remote model if necessary). Next, copy your folder and paste it in the Images folder. Restart CCP and you folder with all the images will be there. I still need some help, however. I could use some advice on how to add RUclipsTV to this remote. What I want to do is to create a one-button way to access RUclipsTV/Live from the program bar on my LG Smart TV. Any help would be greatly appreciated.

I'm using yamaha RX-A6A but there is no comand to set enviroment to play music on all cahnnels or go back to Movie style or AI, is there a way to program that comand if is not listed on IR database?

Meanwhile I just programmed 100 different Harmony Pro remotes... JK. But, harmony Never failed me, clients, saved countless hours, and moved on to other projects. they're all working perfect to this day. I will miss them. Affordable and reliable with actual tech support that would connect remotely OTA and update/modify/resolve issues. Good ol days.

Ever figure this out have same exact rattle

Great Video, do you have a file for a MX 990 that we can use as a example? like a basic setup Samsung TV, Yamaha Receiver and cable TV, New Tv's with the ARC o eARC and CEC you wouldn't need the Power command to the receiver. Thank you

I have a client that wants his favorite TV channel's program as favorite buttons. What's the best way to do this?

I replaced my remote and have two RF light switches. I'm stuck, I can't remember how to program the remote to control the light switches now that I've swapped out the remote. Would you happen to know how? Again, the remote is already programmed, the old one can still control the lights, but the new one can't. From what I recall, I pressed a combo of buttons on the URF RF light switch, then something on the remote... but I can't remember.

??

Nice tutorial. I wish they allowed us to update the CCP software. Makes no sense that the end users can't get updates any longer.

Thanks for doing this video. I was wondering if I might want to tackle this job on my own or have a shop do it. Leaning toward the shop now! :)

I have a functioning URC system based on a MX-890. I have used it every day for the past several years. The problem for me is that I have moved to a new computer and getting Total Control installed on the new computer with the software my dealer, (now out of business), gave me is proving to be very difficult. I can install the software but it will not allow me to load my programming. Any thoughts on how I get past this roadblock?

I would like to see a video on how to create custom graphics. I'm just a home user and don't want to pay $99-$259 for Blackman Custom's graphics packages. I'd be interested in seeing the animated graphics as well. It would also be great to see some advanced programming techniques and basically how a pro thinks about a design for a remote. I've got my macros setup and working, but are there better/more efficient/prettier ways of programming? The other question I had was around IR repeats and "press and hold". I've got an nVidia Shield (2017) that I put a FLIRC module on. I programmed the FLIRC using the MX-990 firing Denon DVD player commands. In the FLIRC software, I used several different layouts to listen for those Denon commands and send the Shield that translation. It was a mess to setup, but it's worked stably for years. I'd love to know how to do "press and hold" in CCP so I can access some long-press menus in the Shield. One thing that threw me for a loop was I wasn't able to get the PROGRAMMING menu to ungray the options for layouts/devices/etc. I finally figured out that I in the SYSTEM DESIGNER window I had the MRF-350 highlighted, and not the MX-990 remote. After that, it worked as normal. Thanks for the video!

Cannot get the power off macro for Tivo to work. I can pm the macro layout if you have a second to look at it.

I have an AppleTV 4k (newest model), I noticed there are several version of Apple in the streaming media player. Any ideas of which one I should be using?

If they would allow dealers to supply software and a customer specific login, I might consider this control. But NO WAY am I buying a F'n Remote that requires you to go to a dealer every time you want to change something. Hopefully everyone thinks the same way and stops buying the products. Maybe then, the company will make it available to those that want it. Then, YOU as the individual can decide if you still want to pay someone to program it for you. If not, hope they end up selling to someone who can. This is bad for dealers too. You'll be looked upon worse than car dealers! Bad enough making an appointment to take your car in, now you gotta take your GD Remote in to have someone change it for you?? Ridiculous! Sorry for the rant and this is not directed towards this video creator... :)

Which remote is that one? Are those apps on the TV? I am trying to program Netflix, Disney, .. etc buttons on CC, any clues, pls.

I found the same path but on the passenger side. The carrier wire was a challenge since my radio or camera instructions explained it.

Can I connect this remote for multiple tv that is the same brand and model and operate them independently?

Hi Folks, I have an MX-990 remote and need to use integer type variables. My software (version 4.12.0302.6) only offers boolean variables. What software version will I need? I don't have an account at URC. Thanks

Unable to get the software from URC for the MX-990. Tech support said they do not allow access to end users, and that I would have to reach out to a dealer. Is this accurate or is the software available through some other outlet? If not, what could I expect to pay a dealer to program my MX-990?

Thank you so much for this! Incredibly helpful!!! I actually thought it was well paced.

hello thanks for your video, i have a problem i bought a house and i already have all this done but i don't know how to connect it to my internet, what should i do? I have never had anything like it.

Hi ! I have a mx-890 for some reason it's not turning on or off my projector Do I need to re program?

My remote won’t turn on and the status bar is blue. What does that mean?

Thanks for the tutorial! Help us a lot. Since you mentioned uploading a video about custom graphics, we were wondering when that one is coming up. We would like to know what program you use to create .png images as well as the sizes required for an MX-990 & MX-980 devices, and how to go about adding those custom graphics to the CCP program. Hopefully you can help us with that soon!