Видео

I would like to see a version of your Sonic Pad mount that can attach to 2020. I have zero modeling experience, leaving me with no options other than to ask anyone reading this for some help. Thanks in advance!!!!

Firmware updates break a lot of features, USB ports are finicky when it comes to giving off random errors stopping your prints, this thing has been a nightmare as much as a convenience

Still a great and relevant video. The jjfx plug in is now available in the marketplace. I have been trying for 3 weeks to get my longer LK5 Pro to work with klipper. and I think most of my issues are bc I tried to switch to Orca....That I do not like.... Im am going to go back to cura and use what I know

Do you Have to offload klipper to a seperate computer? Could i just run a 3D printer from a raspberry pi with klipper?

I feel like you are breaking my bubble a lot

6:40 Not true Marlin has full support of 32 bit arm boards like PI

The regular s1 is fantastic if you know what its good for.

Man, do you really need to cut at every phrase? It's not a g-code. Very usefull video otherwise

Walio do these get across a metal detector???!!

Great information but you went WAY too fast over some of it, specifically how to add the macro into klipper. Remember, a LOT of us watching this are VERY new to klipper and need you to slow down. Treat me like I'm a dummy. 😁😁

A large pork roast would work better for demonstrations better....or a turkey..... they would imitate animal flesh better.

Thank you for your service

All I can say is BAAAAAAHAHAHAHAHAHAHAHAHAHA. I wouldn't buy any non-Bambu bed slinger. There are ZERO creality bed slingers that can compete with a BL A1, Especially reliabilty wise.

Thanks for your work bud!!!! Love it! 😊

I used Cura exclusively up until 5.8.1. I know it well and I am perfectly comfortable with it. None of my printers were klipper. I tried prusaslicer and orcaslicer but found them very cumbersome and the logic used in the layout and naming conventions made it a very unpleasant learning experience. So I went back to Cura. My prints were always good but rarely great. So just to be able to honestly say "I gave it a solid try" I went back to orcasllicer and really worked to understand it. And the print quality was astoundingly better. I even used the exact same stls and copied the settings from Cura into Orca and Orca was ALWAYS better quality. And this was on 100% Marlin printers. Certain functions were more convoluted to achieve while others were simpler. Then I upgrade one of my printers to klipper and the difference was night and day. Exact same stls and print settings and klipper/orca is ALWAYS better. The single most important setting that I modified in Orca that, as far as I know, can't be modified in Cura is volumetric flow. Sure, I can change the flow rate but that's not the same thing. This one setting has made significant speed improvements and I'm baffled that it isn't in Cura...or at least blatantly obvious. Cura is a great program and what I would recommend for any beginner but once one gets to that intermediate stage of printing I find it is limited. They really fell behind on development and now they are playing catch-up. That being said I do still use Cura exclusively for one printer that I have modded and tweaked specifically to print PET bottle filament. I have it perfectly setup and tuned in Cura and it's just too much of a PITA for me to setup as a custom printer in Orca. Now...if I could simply export my printer profile from Cura and just import into Orca I'd go that route. I am curious to see what 5.9 will hold but frankly I am not expecting anything dramatic and certainly not enough to make it worth the time to go back and see. They will really need to WOW me with new functions and functionality.

this video help me out so much

I have an A10 with Octo + marlin i tried to go with Klipper and it was a no go, all the time losing connection to my printer and losing hours of printing , i prefer marlin

I’m a noob, help!

I ordered one to be able to use input shaper. I already accomplish real fast speeds running marlin 2 gcode on a flashed community firmware that has way more features. I have many other mods but I'm just being vague here.

Great video. It’s a shame you quit making content though.

First video I’ve seen from you. Excellent information and you got a new subscriber

Would it be an advantage to my Ender 3 V3 SE if I install KlipperWRT to a Creality Wi-Fi Box? I don't know, but I think my printer may have a much better processing capabilitie than the Box

Wouldn’t 100% infill be better? Or is there a reason you used only 50%

A lot of Bla Bla Bla and no real information

Upgraded ender 3 s1 pro to sonic pad, any idea why the sd card keeps getting corrupted every time I use it in the sonic pad?

What oven temperature setting do you use?

I see youtubers jump and bounce around like clowns but this guy talks with his hands and everyone loses their minds. What is wrong with humanity?

i love the sandwich analogy. I like to learn like that.

I got one and it has never worked and Crealirty customer support sux. 4 Months of back and forth I have perched NEW CABLES AND SD CARDS AND PRINTED SEVERAL CLIPS TO HOLD ALL THE CONNECTORS TIGHT LIKE THEY TOLD ME TOO. I SENT THEM VIDEOS OF IT FAILING AND COPYS ON WERE I PERCHED IT AND THEY REFUSE TO REPLACE THEI BAD PRODUCT. IF I WERE YOU I WOULD QUIT HELPING THESE PEOPLE RIP PEOPLE OFF.

I don't understand the way you present marlin pros. I mean dude you can do multiple extruders on klipper aswell, it has a huge community aswell (and vorons and ratrigs community just ads more to it). And y'all still target the fact that klipper is hard to install and such but as a person that made a custom 3d printer with almost 0 knowledge in this field i can say it was pretty easy to do it. You just take the rpi imager and flash klipper on the sd card and you're almost done. You just need to make the firmware file for your mainboard (this is sometimes hard to do it but if you follow the klipper documentation and READ it's straightforward). Now don't get me wrong marlin is amazing for printers that don't need much quality or speed and just need to print something. And cnc machines! I use a old skr 2 board of mine to run laser marlin for my corexy laser cutter and it's amazing.

28 times pointing fingers in the first minute . I would like to watch the content but it's too much for me. I also like when people point out things that I maybe don't notice. They are usually right. Even though it makes us angry. Not trying to hate. Its just Constructive. Your content seems ok otherwise. Just chill out. 😎

Thank you. this is very helpful. I appreciate it!

Super good clip! Thank you very much

I got the Dry Box 2.0, much better

Great Video!

You explain things very well. It helps alot

I don't see the link to the stl file for the tablet mount

Hi, I have a Creality ender3 s1 pro printer, I don't have any problems with small prints, but when I want to print large prints, it says communication with the MCU is lost at different times and the printing process stops, when I want to continue from where it left off, it starts from the wrong position. Why does this machine give an error with large prints, I searched the internet and couldn't find much information that would be useful for me. I talked to a service and they told me that this could be due to overheating of the sonic pad, stepper or motherboard. I don't know what to do. Do you think cooling the steppers could be a solution, if you have published a video about this, I couldn't find it unfortunately. I would be very happy if you could give me advice. Unfortunately, I don't have enough technical knowledge on these issues. 😞

Great vid..this is exactly what I needed to hear/see and kudos on the bracket design ᕙ(▀̿̿ĺ̯̿̿▀̿ ̿) ᕗ

This does show a useful quality of 3d printing but that is not a food safe print and the carbon fiber will be embedded into your hand and anything you cut.

Great review. How often have you had to strip the head to unblock it. It’s the only thing I’d be concerned with following g your video. Great content, keep up the good work 🏴󠁧󠁢󠁷󠁬󠁳󠁿

I bought one from a bargain place for 5 bucks, I’m still wondering if it was worth that lol

wayyy too much dribble

I’ve been trying to set this thing up for 4 hours, it’s not straightforward when it doesn’t work as it’s supposed to be, google doesn’t help, Reddit gives only answers to questions I didn’t ask, discord doesn’t respond at all, error messages are vague and every hates you when you don’t understand them. And the touch screen is a living hell, some parts don’t respond at all. And all this time I could’ve just used a raspberry pi?

One diwn side of klipper is missiyout on resume printing due to powerloss

If you have a 7 year old printer is now worth 100 dollars max, it’s not worth of buying a raspberry pi to get clipper running on it, investing all of the time it needs to install , configure and tinker with it until it runs right. Marlin would be the easy shortcut to improve the result without much extra time spent. Clipper might speed up thing but the extra speed will also introduce extra problems in many cases , especially with cheaper hardware.

I had no idea how amazing Fusion 360 is until I saw your video. This video needs waaaay more likes!

Thanks for the video, been out of this side of 3D for a few years and it seems.... sure didn't slow down in my time away. I've got a HyperCube Evolution I build and moded a bit from the base project, it's ok or good, but never been FAST, so I tend to use only a small portion of the build area as filling it would be a multi-day print. So, I find myself looking to improve that and start using it again. I'm still using the ramps1.4 stack with Marlin (1.9 i think). Any recomendations on new boards, screens (touch if possible), drives? Hesitant with Klipper simply because I know my limits programming, if a base file for my printer is avalible, could probably stumble throught changing some parameters (size, setsp per mm...ect)

how do you disable macros? The one in particular is when I rooted my K1 Max it changed the purge settings. I can turn it off for that session but I've yet to find a way to fully remove it or at least have it disabled so I don't need to worry about it messing up my print. How do I do that? I'm running Mainsail.

Brother why did you stop uploading videos ?!