Видео

You’ll love this combo

Thanks ! Try part number 51192473040 that might be OEM carbon skirts for g80 though not g82. For side skirts I would suggest looking into aftermarket ones since I don’t like the winglet type of look that OEM offers. There are a few good carbon companies out there. There is an OEM carbon lip available but it’s not too aggressive looking

Glad it worked for you !

Thank you! I just use an iPhone 16 pro nothing fancy haha

Yeah but they just look nice haha

Normal wear and tear. If you go in a certain way you can avoid hitting the bolsters completely haha

Thank you!! Ride quality/ performance between springs and coilovers are so different. If you want a more capable ride with full adjustability I’d highly recommend getting some coilovers

If you contact masteryofartanddesign on IG they can let you know

I didn’t bother to adjust the headlight height … if anything it’d be a marginal difference. There are a lot of videos out on RUclips to check headlight height with a blank wall at your garage and some tape. I did it with my last car

Good call !

Thanks man !

The price difference is definitely justified. With a coilover system you’re getting the entire setup which is optimized to perform cohesively. With springs you’re just aesthetically lowering the car. I would always say go with the full coilover setup

Thank you !

It’s the MHC “m4 style” rear trunk lip from r44 performance bro

It wasn’t the fender arch, that was already addressed before coilovers went in check 4:55 marker of the video to see that. In my case the sound was just due to the geometry of the car changing. I kept the front low as is and slightly raised the rear which completely eliminated the noise

Appreciate the feedback bro! Not trying to waste anyone’s time haha, as a RUclips watcher myself I always hope for the answer right at the beginning and then if I want to continue watching I will so I’m just trying to do content from that perspective 😅 My pirellis only have like one season left on them LOL my rears are pretty worn after only 4000 miles

@@Automaz_ LMAO damn bro, constant RWD burnouts or what 😭😭😂 Your content is dope bro, keep doing what you’re doing and you’ll be at the top in no time! 💪🏼😤

Lolll what

Thanks bro! I’m going to drop another video about my whole tire and winter setup issue haha. But I decided to make my OEM wheels the winter setup and I’m thinking about get M4 CS rims as the summer set

Since I adjusted so many times I unfortunately don’t have the final drop numbers. I am completely flush on the front and then almost completely flush on the rear. It’s a significant drop from stock ride height. Ride quality is even BETTER than it was stock. I am running the Ohlins on the stiffer setting (I did 8 clicks, 10 is recommended, smaller the number the more stiff). The car is very planted, cornering capability feels more confident, and not sloppy over bumps. I purchased the EDC cancel kit , it’s a plug in so you do not get any errors on the iDrive. EDC buttons don’t do anything now

KW HAS kit will get you the lowest drop. I would’ve gone with that if I didn’t do coilovers. In terms of rubbing, you just need to purchase the little fender clearance piece. Cut the fins in your finder liner and put the little clearance piece as I did. You can watch the 4:55 marker of this video to see what that looks like

@@Automaz_ Thank you, appreciate it man.

🫡

It was just the geometry of the car in my case. As soon as I raised the rear a bit more all the noise went away. If I drop the rear some more with helper springs there may be noise again but at that point I’d try to correct it by installing some SPL outer tie rods and such. It varies case by case but this is all normal and not the fault of the coilovers or springs

@Automaz_ u don't need to lower it anymore it looks really good.

Appreciate it bro 🫡🫡

From my experience on my last 3 cars, they didn’t settle enough to be considered impactful to me

@Automaz_ Sorry, but you have no basis for an opinion. Why? Simple--- you admitted in your video that you adjusted your ride height after installing your coilovers. If you left them untouched for several months, they would 100% settle. You just weren't patient enough to leave them alone and then you claimed that they didn't settle. It doesn't happen that quickly. You're clearly new to lowering cars.

SOOQOO V2

SOOQOO V2

Yeah I was super concerned when I heard it haha but glad I was able to get it resolved. Hopefully you get yours sorted out or it just goes away on its own. These are the headaches we choose to take on when modifying but so worth it

Thank you broooo 🫡🫡🫡

The sideway maneuver to avoid the speed bumps 😂😂😂

I have the g82 2025 m4 and there is no way I’m lowering it. To each his own. Your car looks great brother.. keep of the great work.

Thanks bro!

Glad I could help bro! I’m running 15 mm spacers all around. The grille is the SOOQOO V2 carbon grille. I’ll be putting on a front lip next

@@Automaz_ Thanks brother!! I'd be looking forward that that vid and insight on lip clearance while lowered. Considering how much I want to 'touch' my individual maritime blue haha

Modding makes the soul happy 😂

100%%%

🫡🫡

I have SPL front outer tie rods purchased. I was going to install them along with the Millway monoballs. However since the noise went away after raising the rear I decided not to install them. If I lower the rear more with the helper springs I may get the outer tie rods and monoballs installed

Thank you bro! Trying to tastefully mod it haha. I initially thought about top hat and such but all my OEM components only had 3000 miles on them … I was getting so frustrated 😂

Congrats! You’re going to love the car

Congrats on your order !!

can you just order it or do you need to get an allocation?

I love the seats!! Super comfy in my opinion. Congrats on your order !!

Thanks bro! New video has dropped haha

I was so excited when I saw that animation for the first time 😂

Thanks bro!

Great spec you got there!! I like tanzanite blue especially in the sun

Yeah it’s all preference bro! Team Brooklyn Grey haha

🫡

Resonator gets rid of a lot of that unwanted noise / rasp

@ thank you for clarifying that, MAD definitely have the best value over other brand exhaust

Currently on coilovers brotha . Video will be going up next 👀👀

Glad the video was helpful !

Yeah you need the valve controller with any exhaust that utilizes the OEM harness to get its full potential out