- Видео 7
- Просмотров 22 626
_mossymoss
США
Добавлен 26 фев 2013
Bergara, Great Accuracy for the Money
Overall 13 shots, 6 head/neck, 4 body, and 3 shots just missed the over landing over top of the shoulders with alternating wind making it difficult. Head of silhouette is approximately 5”x5”. 97 degree day with a lot of mirage down range, no spotter, enjoy. This setup continues to perform, check out the video I did getting 0.25 MOA on a calm day.
Просмотров: 53
Видео
7.3 Differential Cover and Service
Просмотров 215 месяцев назад
0:00 (Cleaning of Axle to Diff Cover Mating Surface), 1:39 (Installing Cover & Torquing), 5:43 (Sight Glass, Drain Plug, & Temp Port Plug), 8:40 (Begin Fluid Fill), 9:52 (Is that a Tornado?), 11:42 (Recent Nascar Story), 12:56 (Final Reveal), 13:01 (Downtime Bloopers Struggling with O-Ring) AmsOil Full Synthetic SAE 75W-140 Severe Gear (Blue Label on Bag) 10 FT-LBS (Stainless Hardware Holding o...
OBS 7.3 Apple Carplay
Просмотров 79Год назад
Here's my tablet setup in my 1997 F-350 7.3 Powerstroke. It functions as my radio, gauge cluster, diagnostic tool, entertainment screen, etc. The screen is a 9" 1080p HD quality with quick response. This has been a wonderful addition and I would recommend to everyone that's considering adding something of this sort to their own truck.
New Peterbilt Model 589
Просмотров 1 тыс.Год назад
The Model 589 Reveal event was held at Texas Motor Speedway on 5/9/2023. All the truck specific information came from the Peterbilt spokesman leading the event. The new truck is said to go into production at the beginning of 2024 and is supposed to replace the beloved model 389.
Bergara 1/4 MOA! Berger 153.5gr, 6.5CM
Просмотров 2,7 тыс.Год назад
Bergara B-14 HMR shoots lights out coupled with Berger Factory Ammo, 6.5mm Creedmoor 153.5gr Long Range Hybrid Target
Area 419 Picatinny Rail Install on Bergara HMR
Просмотров 18 тыс.Год назад
Area 419 Picatinny Rail Install on Bergara HMR
Perfect ! Man glad you made this video . Was looking to see if you could even put a picatiny rail for a bipod on the front . do you think this will work on the hmr-14 carbon wilderness?
I'd be willing to bet it would work fine. I believe it is the same stock across both platforms, just a different paint scheme. The difference between the two comes from the barrel. Thanks for watching.
@@_mossymoss how do you like that rifle ? My friends keep saying that the Ruger American and the savage will do the same thing at distance. I no we’re no experts. But do you have any regrets on your rifle purchase? I have been on the fence about if it’s worth spending the extra money and going with the bergara. But I shoot a lot and just think if I buy once cry once ill have no regrets?
I think I have been on the fence bc the feedback I get from my buddy’s . But I can’t honestly say if there hateing bc they do not have the same funds that I do to purchase a rifle like the carbon instead of just something say average.
Personally, I do not have any experience with the Ruger American. I also haven't shot a Savage that is newer than a decade old. It shot well but the action smoothness was like walking barefoot on gravel, I'm sure they are better now as that's a long time to improve. I am very happy with my purchase of the hmr, I have a lot of rounds through it and it performs really well. Go check out some of my other videos to see the accuracy it provides. I do not think you will be disappointed at all. Just a tip for the future don't take anyone's opinions as set in stone about a subject if they don't have extended periods of time with all the pieces of equipment that are up for debate.
@@_mossymoss perfect man I absolutely will thank you for your time .
it was helpful, thank you.
I know this is an older video but just curious could you have used the old slings studs to mount this?
I can't say for sure because I didn't try it, but I'm leaning towards no. The reason being is I think the studs are bigger around than the head of the screws so I don't think they would sit flush on the inside of the rail. It comes with the correct screws and the bottom of the rail has a QD mount, you can get a sling that has a QD end to it rather than typical screw into sling studs would be my recommendation.
Sweet
Nice presentation 👏
Which bi-pod did you upgrate to?
I've been needing to do a video on that bipod. I went with a Accu-Tac SR-5 G2. It's pricey, but every bit worth it. It's built from T6 series aluminum and hands down the best I've ever used.
What bipod did you end up using? There’s still an option for a sling attachment correct?
I've been needing to do a video on that bipod. I went with a Accu-Tac SR-5 G2. It's pricey, but every bit worth it. It's built from T6 series aluminum and hands down best I've ever used. There is a QD attachment point at the back of this rail which you could attach a sling to as long as it had a QD attachment method on the sling.
Loving the ute brother. Much love from New Zealand
Thanks for the video! I didn't know it existed until I saw this. Just to confirm, the screws you used came with the rail? And they didn't go so far in as to touch the barrel?
Thanks for watching! That is correct, the screws came with the rail. They are the correct length, you don't have to worry about them interfering with the barrel.
Cool video, defiently ordering this for my Bergara B14 HMR. Which Attachment Method did you pick for the Rail? mlok, keymod or traditional?
You'll need the traditional for the Bergara
Traditional
Good instructional video but not using a torque wrench could damage your rifle handguard also remember to use thread locker like loctite 242 if you want those screws tight ....!
I have 550 rounds on this now after the new rail and bipod and not an ounce of play so it's working out fine for me without either. But I agree, Loctite and a proper torque tool would be good additions to use here if you'd like.
Dang I didn’t know the 97s had CarPlay. Ford just before their time man
ahah yeah, Ford always ahead with the creature comforts
FORD" ITS A GENERATIONAL THANG"❤
How did those screw fit?! My b14 hmr sling studs are course thread like a regular construction screw 🤔
My sling studs were threaded 10-32 from factory. That's very odd, the rear spacers for the adjustable length of pull are the only thing on my stock that would be considered a construction style screw
Could you tell me the diameter of the original Bergara screws of the sling mounts? is it like 10-32 or 1/4-20?
It is 10-32
@@_mossymoss thanks a lot! <3
Thanks, I've been trying to find the correct thread size.@@_mossymoss
Is that a good hunting round?
I'll be using it for the first time this hunting season. I think it's plenty fine but if you want to do your own analysis go to Bergers website and look at the bullet construction of this style of bullet versus their "hunting" style and you'll see why I say it is fine
Wouldn't buy it unless it had a cat.
in a perfect world yes, but CAT hasn't been in on highway trucks for over 10 years...don't think they care to come back either lol
@_mossymoss well, there ya go. The last truck I owned was a t600 with a twin turbo c15 550hp. Ran like a raped ape. And I still got 4.5 mpg, course that was when you could get diesel in Troutdale Oregon for 98 cents a gallon. Do you think I've been out of truckin for a bit??? Lol, have a great day.
@@richarddeschamps5425 sounds like a hell of a truck! I agree with you, don’t get better than that 15L cat. Have a good one!
Nice work and nice rifle I have the exact same setup. Idk if the Area 419 is considered top notch but I like it. And there reloading gear is definitely my favorite.
Works great for me, gives the options for much more variety of bipods. With the new set up my accuracy is better from different positions since the new anchor point is very solid.
just my unbiased opinion, but my favorite part of the new 589 are those functional stacks
Yeah the fake stacks on some other models are pointless
😎👍
Roll Tide!!
Roll Tide!
Roll tide
Do you have the part number for that rail specifically?
The part number in their system is "419-IBR-BK"
I got big hands too, how fun is it installing the detent springs on a AR with no tools? lol
mighty aggravatin to say the least lol
wow what a shot
Thanks, it was a slight surprise for me also lol
do u need to use threadlocker?
I didn't, I have about 250 rounds on it with the new bipod and still don't have an ounce of wiggle
Thank you that was good to see before operating on mine.
Glad you found it useful!
Can that picantiny rail be used also for tripods ?
Yes, it could be used with a tripod but the tripod head would likely need a small adapter. Most tripods attach using something called Arca rail, so you would need an adapter for the tripod head which are relatively inexpensive.
What type of Harris did you take off? I have an hMR but not sure if I want the rail?
It was an older Harris so it doesn't have the type stamped on the part, but it would essentially be a S-BR2 with a longer extension and a different tilt tension knob. Trust me get the rail you will wish you had a long time ago