Jake Logan
Jake Logan
  • Видео 25
  • Просмотров 935 992

Видео

Ported Eaton Terminator Cobra 40 Roll
Просмотров 840Год назад
Pull was done on a flat stretch of road with 70 degree ambient temperature. Mods: Ported Eaton 2.8 Upper Pulley Metco 4lb Lower Pulley JLT Cold Air Ford Performance 60lb Injectors Kenne Bell Boost-a-Pump BA2600 MAF LFP Heat Exchanger MGW Shifter McLeod Street Extreme Clutch VMP Performance Email Tune
VMP Gen2r GT500 ripping through the gears
Просмотров 896Год назад
VMP Gen2r GT500 ripping through the gears
2004 Cobra Magnaflow Competition Series + OR X Pipe
Просмотров 213Год назад
2004 Cobra Magnaflow Competition Series OR X Pipe
Yamaha Bolt Vance and Hines Twin Slash Exhaust
Просмотров 1,7 тыс.2 года назад
Yamaha Bolt Vance and Hines Twin Slash Exhaust
2004 Pontiac GTO Longtube Headers, X Pipe, SLP Loudmouth ll
Просмотров 9342 года назад
Car has a TSP 233/239 Cam, Speed Engineering Longtube Headers, Amazon X Pipe, and SLP Loudmouth ll Catback
Yamaha YZ450F FMF Exhaust
Просмотров 8022 года назад
Full FMF Exhaust on my 2011 yz450f. From header to muffler.
2011 Mustang GT Flowmaster Outlaw Exhaust
Просмотров 1,7 тыс.2 года назад
A quick video of my 2011 Mustang GT with factory manifolds, x pipe, and Flowmaster Outlaw Axle Back exhaust system. These mufflers are extremely loud!and sound great on these coyote powered mustangs.
2011 Mustang GT 60-110 Pull
Просмотров 3022 года назад
60-110 Pull in my 2011 GT. Only mods are a 2018 Manifold, BBK Intake, Exhaust, Tune
Pontiac GTO TSP 233/239 Cam
Просмотров 4,3 тыс.2 года назад
Pontiac GTO TSP 233/239 Cam
Pontiac GTO Oil Catch Can Install
Просмотров 2,1 тыс.3 года назад
An oil catch can is a must have on an LS. Keeping the oil out of your intake will help your engine run better and make more power. This oil catch can cost $25 on Amazon and is very well designed. This catch can is going on a 2004 GTO, but this can installs the same way on any 2001 and up LS1, LS6, LS2, LS3 equipped vehicle. Link to this catch can www.amazon.com/PQYRACING-Compact-Baffled-2-Port-...
Jeep Wrangler 2.5L Flowmaster 40 Series
Просмотров 14 тыс.3 года назад
Sound clip of the exhaust on my 2.5L Wrangler. Flowmaster 40 series muffler 2.25 in exhaust, Pacesetter Longtube Header, No Cat.
How to install a Speed Bleeder on a T56
Просмотров 4,3 тыс.3 года назад
Installing a speed bleeder on a t56 going in my camaro. This specific speed bleeder came from tick performance, but theyre are plenty of other options out there as well. Installing this line will allow you to bleed your clutch by yourself from outside your car which will make things way easier than it would crawling under the car and trying to crack open the bleeder valve.
Pontiac GTO Acceleration
Просмотров 1,3 тыс.3 года назад
Pontiac GTO Acceleration
2004 GTO Dyno Pull
Просмотров 1,8 тыс.3 года назад
2004 GTO Dyno Pull
Schumacher Battery Charger Tutorial
Просмотров 104 тыс.3 года назад
Schumacher Battery Charger Tutorial
Pontiac GTO Yank SS4000 Drivability
Просмотров 4123 года назад
Pontiac GTO Yank SS4000 Drivability
Camaro SS Texas Speed MS3 Cam
Просмотров 8793 года назад
Camaro SS Texas Speed MS3 Cam
2021 Dodge Durango Hellcat 1/4 Mile
Просмотров 1,4 тыс.3 года назад
2021 Dodge Durango Hellcat 1/4 Mile
BMW 330i ZHP vs Mustang GT
Просмотров 791 тыс.3 года назад
BMW 330i ZHP vs Mustang GT
Mazdaspeed 3 vs Pontiac GTO
Просмотров 1013 года назад
Mazdaspeed 3 vs Pontiac GTO
Ferrari 488 vs Terminator Cobra
Просмотров 2963 года назад
Ferrari 488 vs Terminator Cobra
Pontiac GTO Longtube Headers / SLP Loudmouth ll Exhaust
Просмотров 1,5 тыс.3 года назад
Pontiac GTO Longtube Headers / SLP Loudmouth ll Exhaust

Комментарии

  • @jacobwebb8818
    @jacobwebb8818 18 дней назад

    I felt stupid asking this question. Now that I have watched this video, I feel twice as stupid lol. I figured that's what it was but the listing Im looking at has T's and extra bleeder ports so that's what threw me off

  • @izs1991
    @izs1991 Месяц назад

    I’m looking at getting a ported blower very soon and a 4lb lower. I have basically the same supporting mods. Do you feel like there is some power left on the table in that tune? Seems a little soft for a ported blower with a 2.8 upper and 4lb lower.

    • @jakelogan630
      @jakelogan630 Месяц назад

      The car was remote tuned my VMP, a dyno tune probably could’ve gotten more out of it. But also I had to ease into the pull at first so the car wouldn’t spin. So with a better tire it probably would’ve been a little faster from a roll.

    • @izs1991
      @izs1991 Месяц назад

      Gotcha. I wasn’t trying to be a douche just genuinely curious. Still have the car?

    • @jakelogan630
      @jakelogan630 Месяц назад

      @@izs1991 no I sold it last year unfortunately. Things I’d do to have another one 😂

  • @neilmcdowell9059
    @neilmcdowell9059 3 месяца назад

    I got the same charger but the % never shows up. Does yours?

  • @Sessions1
    @Sessions1 3 месяца назад

    I’m informative thank you

  • @c-qc-q2021
    @c-qc-q2021 4 месяца назад

    I have this charger but not a fan because of the shape. It takes twice the space on the shelf as my previous one that stood upright but you could also lay flat.

  • @letsride8683
    @letsride8683 4 месяца назад

    Is it just the mufflers replaced or the hole catback system?

    • @jakelogan630
      @jakelogan630 4 месяца назад

      Just the mufflers. The car had the resonators deleted and an X Pipe

  • @BrothersBuilds
    @BrothersBuilds 5 месяцев назад

    Goshen Valley?

  • @Colton306x
    @Colton306x 7 месяцев назад

    What gas tank?

  • @guy-ic4sr
    @guy-ic4sr 7 месяцев назад

    Emissions testing is my question

    • @africatwinrd03
      @africatwinrd03 7 месяцев назад

      Who cares? Sounds good, that's enough

    • @Ken-h9r
      @Ken-h9r 3 месяца назад

      ​@africatwinrd03 Who cares about the sound I'm concerned about lack of backpressure and power loss..

  • @AlfredSanchez-hs5uh
    @AlfredSanchez-hs5uh 7 месяцев назад

    2:12 years 24 2:12

  • @cespool
    @cespool 7 месяцев назад

    Funny you're charging a gel battery

  • @jaydenrosen9201
    @jaydenrosen9201 8 месяцев назад

    So how did that catch can end up attaching to the bracket I have the same can and made a bracket but I haven’t put it on are the screws that come with the can like self tappers?

    • @jakelogan630
      @jakelogan630 8 месяцев назад

      I just drilled a small hole in the bracket and got a small nut and bolt to attach it.

    • @jaydenrosen9201
      @jaydenrosen9201 8 месяцев назад

      @@jakelogan630 thanks man

  • @bertharuiz1225
    @bertharuiz1225 9 месяцев назад

    I m 81 have shumaker XP2260.

  • @MODIT
    @MODIT 9 месяцев назад

    by chance to you have the part number for the cat back, can't seem to find it.

  • @JonnyAbs-0
    @JonnyAbs-0 10 месяцев назад

    what kind of dyno? numbers seem a bit low for this cam plus 243s.

    • @jakelogan630
      @jakelogan630 10 месяцев назад

      If it was a T56 I think it would’ve made 20-30 more hp. Those 4l60s rob a lot of power unfortunately.

    • @JonnyAbs-0
      @JonnyAbs-0 10 месяцев назад

      ​@@jakelogan630 I was thinking maybe half that. 10-15hp

  • @huckleberrymulberry4764
    @huckleberrymulberry4764 11 месяцев назад

    My Schumacher SC1281 no longer works after it was exposed charging a battery during a rain. Is there something to check on it that could be an easy fix or is it good for the landfill?

  • @anthonyparker6586
    @anthonyparker6586 Год назад

    I love this car, my buddy owns it now

  • @drewdougherty4373
    @drewdougherty4373 Год назад

    Little Mustang guy must be so proud lol.. sheesh

  • @mitzubishi3296
    @mitzubishi3296 Год назад

    01:23 Thug Life 🚬😎

  • @lolacarter5015
    @lolacarter5015 Год назад

    That isn't the way this thing works

  • @stockND3
    @stockND3 Год назад

    how much power at the wheels?

  • @JustinRaney
    @JustinRaney Год назад

    what dyno numbers and mods? Thanks i have a 6 speed gto looking to buy the same cam.

    • @jakelogan630
      @jakelogan630 Год назад

      410 whp 362 tq. Cam, Unported 243 heads, longtubes, dyno tune

    • @JustinRaney
      @JustinRaney Год назад

      @@jakelogan630 what kind of dyno the torque should have been higher? My 98 z28 with a 218 cam stock heads ls1 Intake made 375wtq on a mustang Dyno. Was just curious as I'm interested same cam stock bolt on 04 gto

    • @jakelogan630
      @jakelogan630 Год назад

      @@JustinRaney dynocom

  • @garthbarcey8826
    @garthbarcey8826 Год назад

    Do not buy this product! Send it back to the Chinese!

  • @garthbarcey8826
    @garthbarcey8826 Год назад

    Very very poor product😢.

  • @walterzul
    @walterzul Год назад

    Hello, excelent review. Do you know if the jump start feature works with a 6 Volts battery or just with 12 volts battery in the car? I have a vintage Willys CJ2A with the original 6 Volts system. Thanks. Responder

  • @johnfrachiseur7955
    @johnfrachiseur7955 Год назад

    What about the % in the top left red how do you get that to show?

    • @lavaman9162
      @lavaman9162 4 месяца назад

      It should show automatically when its charging

  • @concrete2733
    @concrete2733 Год назад

    nice

  • @goat_life254
    @goat_life254 Год назад

    Bought the same cam but with a 110lsa. Can’t wait to see how it feels and sounds

  • @bilelounacer4482
    @bilelounacer4482 Год назад

    Bmw💪💪💪💪

  • @FalseHoodx
    @FalseHoodx Год назад

    I’m looking to make about 440whp hopefully more torque, got an LS1 383 stroker, ported heads, mild tsp cam massive intake mani 102mm TB LTH ofc lower compression ratio engine is fully built for boost. Gonna be tuned on 93

  • @somebodyyouusetoknow4532
    @somebodyyouusetoknow4532 Год назад

    What gears?

  • @gedionsamuel2256
    @gedionsamuel2256 Год назад

    According to most Schumacher manuals you’re supposed to use an insulated 6AWG cable of length 2 feet (minimum or more) for the negative post, as opposed to just directly attaching the negative/black wire directly. I use the black wire of a jumper cable set (just clamp reds of the jumper together and put out of the way). So: attach the red charger cable directly to positive post, then attach the black charger cable to one end of the black jumper cable, then attach the other end of the black jumper cable to the negative post of the battery. A good practice is to also have the battery sitting on top of some type of insulation (cardboard/plywood..) instead of the battery bottom directly on cold concrete.

  • @michaelalbro6856
    @michaelalbro6856 Год назад

    Have that same Jeep, got a flow master 60 series DF, haven’t received it yet but hopefully it will sound as good.

  • @rickfreeman9530
    @rickfreeman9530 Год назад

    Your not suppose to charge AGM battery's over a certain amount. I think it's only to be max charged at under 15 amps. And don't use a jump box or over 15 amps. Is O.k.to jump from another battery or vehicle. Read the info that comes with the battery or you will ruin it or deplete its life span. Look it up! Montana Rick.

    • @gtb5216
      @gtb5216 Год назад

      That is false! If an AGM battery drops below a certain level a normal charger will not grab it and you will have to 15 or 30 amp boost until the AGM charge lifts to a point that the normal chargers can grab it. I run all AGMs in my boat and a 15-3 charger will handle them fine. If for some reason they get to low I have to boost them at 30 amps for 15 min before the charger will recognize them.

  • @SneakerKidd101
    @SneakerKidd101 Год назад

    How much were you able to mill the heads with this cam?

    • @jakelogan630
      @jakelogan630 Год назад

      I’m not sure the car already had heads on it when I bought it

  • @morriskl3
    @morriskl3 Год назад

    Pressing the start button is one detail i missed when trying to use my 'hand me down charger'. Thought it was something else, smh thank you!

  • @ChristineJGold
    @ChristineJGold Год назад

    I used to 100amp, still not starting. Suspect dead battery, was tested ok. Any ideas?

    • @jakelogan630
      @jakelogan630 Год назад

      If you’re not getting any clicking or cranking when you turn the key you may have a bad starter or ignition problem

    • @ChristineJGold
      @ChristineJGold Год назад

      @@jakelogan630 is started yesterday. Now this mornings are thing, lights flash on dashboard, not starting. Tried 100 amp, nothing. Do you suggest 30amp charging? It was plugged in overnight

  • @mochafudgetruffle
    @mochafudgetruffle Год назад

    You did not show where to put the clamps.

    • @OvernightCrew
      @OvernightCrew Год назад

      Black goes to black, red goes to red

    • @gedionsamuel2256
      @gedionsamuel2256 Год назад

      According to most Schumacher manuals you’re supposed to use an insulated 6AWG cable of length 2 feet (minimum or more) for the negative post, as opposed to just directly attaching the negative/black wire directly. I use the black wire of a jumper cable set (just clamp reds of the jumper together and put out of the way). So: attach the red charger cable directly to positive post, then attach the black charger cable to one end of the black jumper cable, then attach the other end of the black jumper cable to the negative post of the battery. A good practice is to also have the battery sitting on top of some type of insulation (cardboard/plywood..) instead of the battery bottom directly on cold concrete.

  • @bobjmb71
    @bobjmb71 Год назад

    Thanks good info

  • @nacho1921
    @nacho1921 2 года назад

    how did you make the bmw sound like that? 😍

  • @ozmo69
    @ozmo69 2 года назад

    I gotta say that is one heavy ass passanger

  • @slopadoodle
    @slopadoodle 2 года назад

    I'm a little confused by some of the comments, Jake. I got this system this evening so as to hold me over until I can get my battery replaced. If I let it charge long enough can I not take it with me--- in case my car trys to not start on me again--- so that I can jump my car??

    • @jakelogan630
      @jakelogan630 2 года назад

      From what I understand this isn’t a jump pack it’s only a battery charger. However it’s better than nothing if you can find an outlet to plug into near by.

  • @georgiaboy1579
    @georgiaboy1579 2 года назад

    Sounds rowdy. Nice work Sir

  • @CharlieBlog
    @CharlieBlog 2 года назад

    0:10 Mark Zuckerberg always a warrior !

  • @bimmer.joo34
    @bimmer.joo34 2 года назад

    What a lovely zhp

  • @musicdontstop194
    @musicdontstop194 2 года назад

    Nothing like a mustang gt, looks great , runs great and does not break down ,and is cheap to maintain.

    • @Garf2O
      @Garf2O 2 года назад

      Dont forget that a gt premium when it was brand new was 2 grand cheaper than a regular 330ci was without the zhp package

    • @younlgolko263
      @younlgolko263 Год назад

      And mistangs interior is made of toys plastic. Also it cant do corners, drinks fuel like nothing else 😅

    • @egg0534
      @egg0534 Год назад

      Was the last "and" added as last second call? It sure does seem like it was.

  • @leroystokes3923
    @leroystokes3923 2 года назад

    Ain gone even lie that mustang sound agressive

  • @williesworldofwheels
    @williesworldofwheels 2 года назад

    Nice. What’s that clunk in between the shift?

  • @robertogarridolopez416
    @robertogarridolopez416 2 года назад

    LA ADRENALINA SIEMPRE NOS DA MUCHA ALEGRÍA PERO TENEMOS QUE TENER MUCHO CUIDADO SI QUEREMOS CONSERVAR LA VIDA....... YO CON UN DEPOTIVO QUE TENIA LOQUE EN UN VIAJE SE TARDABA CINCO HORAS YO HESE VIAJE CON MI DEPORTIVO LO HICE EN DOS HORAS IICUARTO ?? PERO SIEMPRE SAVIA MUY BIEN LOQUE TENIA QUE HACER ?? PERO EL DEPOTIVO MENOS DE LOS 160 POR HORA NUNCA LO LLEVAVA NORMAL MENTE LO LLEVAVA A 190 Y 225 POR HORA PRÁCTICAMENTE TODO EL VIAJE ?? OSEA QUE SIEMPRE ESIDO TODO UN MAQUINA ??

  • @Loulovesspeed
    @Loulovesspeed 2 года назад

    Just like the old days at the end - a Shelby to the rescue!