Видео

thanks for watching! now, don't get me started on utoob Terms of Service rules on installing specific types of parts on certain types of items, and how those TOS change without notice.

now my snarky reply: if you cannot install m-lok parts, then seek actual assistance and guidance from magpul (they wanna help you!) so you can then .... install m-lok parts, not just from a video from some rando on the internet

@@JustTheARplatform , I see your point, but actually installing the Magpul bipod can be a pain in the butt. I'm beginning to think it's impossible on MY AR-15 barrel handguard with its spaced, "keyhole" slots.

Can you describe your handguard's slots further , or is .... Your mention of "keyhole"... are they actually the Key-mod slide in type ? if that is the case, there are keymod to m-lok adapter plates from different providers, but you will also need longer screws to adjust for the increased height difference, so check to see if they are included with the adapters.

another option is the rail mounted version of the bipod, preferably with a 17s style quick detach lever, that way you would just need to use or add a compatible rail section to the bottom surface of the handguard.

Agree, same decibel level. One difference, is that compared to a muzzle brake with large side vents, or BACKWARDS directed side vents....oooof much better. I've had my boonie hat BLOWN off my head from spotting next to muzzle brake items.

and as someone also mentioned in the comments, there is storage inside the longer version grip.

tough question, perhaps monitor auction closing prices for similar items in similar condition?

Both of the adjustable stocks (M4 style and CAR style) have Midwest Industries sling QD adapters for those stock types. Just checked the MI website and...uh...hmmm looks like not in current production...uhhhh. maybe look for similar brand options ? or maybe the random website that still stocks them, you never know, somebody may still have some.

@JustTheARplatform alrighty man, thank you. I'm new to ar-15's guns. I'm trying to learn as much as I can.

you have decades of 'evolution' to catch up on lol, deep deep rabbit hole, enjoy!

Shop around, there are different brands, different lengths of sights to clear large handguards, and accessories that ...stick out and will block your view. There are also fold down versions of offset sights, ghost rings, different front sight post diameters, etc etc.

you forgot to include 'OLD', as in OLD rookie nerd. Also, good luck finding one with the markings that looks exactly like this one. To be honest, I think it is an overpriced vanity/glamour/bling-looking BCG. I only bought one of these. You should see which parts-slap-together it ended up in, dare not to laugh when u see... At some point, I will do a vid on the bulk buy BCG brand that is stuffed in some of my other wanna-be-clone-imperfect-good-enough boring items.

i had more fun making the thumbnail than filming the 'quick observation' video. I'm no expert, this is actually just the channel i post one-take-blab about something on saturdays, i post monday thru friday on my main channel.

I had my first ooopsie with the rear upper tab that covers the gap over the delta ring...snapped it right off. I swear I'm not a big gorilla/sasquatch, it just happened! 🫢

do what you gotta do. As I found out with my example, it just wore out and started spinning around with each trigger pull, and reset.

I use the individual CMC pins for aging/showing-wear-and-tear lower receivers (range beaters).

Just got the return paperwork from midway. Going to use the Wilson combat pins. Only reason I want them is the diamond tech trigger doesn’t retain them as well as I would like. For the price of the trigger they should include them in the kit.

Thanks for sharing the additional info!

the top portion has the same relative dimensions as an "AR" pattern metal magazine, and fits the standard "AR" pattern magwell.

You''ll be fine... My example was obtained YEARS ago, so I expect a 'continuous improvement' (business speak) design process is used by this size of manufacturer.

Deep breath.... I think the VG6 C.A.G.E device is.....DISCONTINUED.... I can only guess why, because some users were not satisfied(?) (or maybe the installation was too complicated for them? I've met people who could not change a flat tire on their car) (also met people who did not know about left hand threading). Who knew this little part set would become "collectible".

good question, ( just to clarify, are you asking about the 'silver' colored insert piece that interfaces with the slots on the flash hider itself?) That silver piece does appear to be able to be mounted with either the protruding lug in the forward slot, or the rearward slot. Which way is correct? I would suggest contacting VG6, because the product information card did not seem to specify.

@@JustTheARplatform Yes exactly about that silver piece.....I'll ask them.........thx for feedback :) regards.

Good luck, never tried researching serial numbers of lower receivers to year of production, but that may help re-assure you of what years of 'corporate management ideology' was running each company. All the cliche suggestions like 'buy once, cry once', or ' you get what you pay for ', or 'don't cheap out', still do not matter if the end result... like you say is sloppy or FUBAR.

@@JustTheARplatform It showed up filthy with mud and a little beat up. But after a deep cleaning with compressed air and some Ballistol, it works and clicks good now. Nothing sloppy. I think I'm pleased for the price.

It is a 'barrel' weight, so expect possible accuracy shift over distance. Also like many other blast diverters, there is the 5th-6th round possible flyer due to the air vortex distortion pattern during 'not slow fire rate' ( i dunno, my own unproven theory )

Good catch, and.... it's my actual FIRST youtube channel, so thank you so much for noticing as well! Mmmmwah!

It is literally an '18' inch barrel, but for design reasons, Clint went with 17.7, to possibly accomodate certain muzzle attachment length options to fit under certain handguard, or maybe I just don't know and should hide under the desk.

I have two 17.7 hansons and they balance very well even with a bipod, 45 degree red dot and a 4-14 scope and a 14" midwest industries handguard it doesn't feel too heavy and still balances nicely

yup , agree, barrel flex, which bends the sights in the same direction as the barrel. with a barrel that short, short distances are the 'use-case-scenario'. But attaching it to the lower sling loop or ANYTHING on the barrel with a fixed FSB technically does the same thing by design, so, the FSB setup/2 end handguard setup is a no win scenario. ( if you can guess, i got the item purely for the kitch/retro/camp/uncharted-territory-tech-1960s interest ) also jungle warfare training doctrine is the sling is not used on patrol, only on march

Suggest RETURNING the product for exchange or refund! Should feel 'stiff/stable' after setting the tension knob.

It appears to be designed to be a one-way assembly. The tension knob is 'captured', so removal would require taking the knob off which may cause damage to the item. Look for a throw-lever- option.

It was labeled as 'CB', and does appear to be 'Coyote Brown', but compared to the FDE versions, it does appear to be more of an 'organic' color.

My understanding is that 'America's Rifle' is a re-issue of Black Rifle II. Not sure if there are any further edits and/or additional material in 'America's Rifle'.

Yes, I received TWO 'we have received your order' emails. There does seem to be a 1 day timing difference between when card was charged and first email, second email arrived 7 days later.... maybe check your spam folder as well in case it ended up in there. I checked the tactical transition website, and the 'Contact' tab leads to their page with email and telephone number.

You may have figured out my 'summer secret' way to fill out those 'missing day' videos on 'alvmahn'. (Alvmahn has partial weeks already scheduled out, but there are 'daily gaps' yet to be filmed (lots of stuff, not enough time, or could be an oversaturated topic).

Ya, the attachment is based solely on the timing of the muzzle brake or flash hider 'mounting solution', and that is timed with the solid portion facing straight down, and middle vent straight up. The hump of the latch hinge on all 3 examples perfectly align to top center, its the 'sleeve' portion that appears to have variations in 'weld attachment locating'. I am not as concerned about the front hole 'appearance' versus a smaller diameter muzzle attachment like a 'normal' flash hider, muzzle brake, or 'mounting solution'.