![iDevice Repair - iPad iPhone Macbook TV Repair](/img/default-banner.jpg)
- Видео 14
- Просмотров 90 221
iDevice Repair - iPad iPhone Macbook TV Repair
США
Добавлен 4 окт 2015
iDevice Repair is a television repair service in Casselberry, FL. We offer onsite repair or you may stop by at our drop-off location and wait for an estimate. We guarantee no other repair shop in Casselberry delivers more value than we do. iDevice Repair values your time since it's the most valuable commodity anyone can have. Let us help you, today.
Samsung TV - No Power - UN75RU7100FXZA - BN44-00992A FIX
Fixing Samsung UN75RU7100FXZA TV No Power Issue | DIY Repair Guide
Description:
Is your Samsung UN75RU7100FXZA, UN75RU7100FXZC or UN75RU710DFXZA TV refusing to power up, leaving you frustrated with no signs of life? Don't worry, you're not alone! In this video, we'll guide you through a common issue with this model and show you how to fix it yourself.
Many users have encountered the dreaded "no power" problem with their Samsung UN75RU7100FXZA TVs. But fear not, the solution might be simpler than you think! The culprit could be a faulty fuse, capacitor, or Mosfet, specifically FP801S, CP835, and QP802CS respectively.
In this comprehensive DIY repair guide, we'll walk you through the step-by-st...
Description:
Is your Samsung UN75RU7100FXZA, UN75RU7100FXZC or UN75RU710DFXZA TV refusing to power up, leaving you frustrated with no signs of life? Don't worry, you're not alone! In this video, we'll guide you through a common issue with this model and show you how to fix it yourself.
Many users have encountered the dreaded "no power" problem with their Samsung UN75RU7100FXZA TVs. But fear not, the solution might be simpler than you think! The culprit could be a faulty fuse, capacitor, or Mosfet, specifically FP801S, CP835, and QP802CS respectively.
In this comprehensive DIY repair guide, we'll walk you through the step-by-st...
Просмотров: 256
Видео
Wii U Disc Error 160-1400 Repair
Просмотров 4,1 тыс.7 месяцев назад
Wii U Error 160-1400 Resolved: Fixing the Disc Drive Fuse If you've encountered the frustrating Wii U error code 160-1400, signaling disc drive issues, fear not - there's a specific solution that can bring your console back to life. This guide focuses on a common culprit: a blown fuse on the disc drive cable line connected to the motherboard. By replacing the fuse, you can banish the 160-1400 e...
PS5 No Signal - HDMI Issue (FIX)
Просмотров 299Год назад
This is a quick video of the highly sought after PS5. I go over how to remove the HDMI Port and how to replace with a new one. Then reassemble and test functionality once I am finished. Hope you everyone enjoys!
Vizio Mainboard - Heat Sink Removal
Просмотров 1,5 тыс.Год назад
This a explainer video on how to remove the heat sink from my previous video: ruclips.net/video/U-WxVz1f5LI/видео.html This explainer goes into detail on how to remove heat sink, clean the area, remove thermal paste from heat sink and affected chip, prepare the fixed chip with upgraded materials and to reassemble to install back into the TV. This video was highly requested by the community and ...
Sony TV No Power/Dead Set FIX (UPDATED)
Просмотров 849Год назад
Here is a brief diagnostic on a very common issue for the following Sony TV models: XBR-55X930D XBR-65X930D XBR-65X935D XBR-65X937D Interested in getting this repair done? Email us help@idevicerepairfl.com and we'll send you mail-in repair instructions. Thanks for watching!
Super Nintendo was found in the trash, RESTORED
Просмотров 1012 года назад
Our team here @IDeviceRepairOrlando put this video together to give this SNES another life. We hope you enjoy the video as much as we enjoyed working on this blast from the past. Please let us know if you want to see any other gaming consoles restored! We would love the opportunity to restore some old electronics. If you'd like us to restore your old console or fix your gaming console then plea...
Vizio TV Turns On, But No Picture FIX (UPDATED)
Просмотров 69 тыс.2 года назад
This repair is for these TV models: M75-C1, M65-C1, M50-C1, M49-C1, M43-C1 Main symptom: Front LED slowly fades, the TV turns on and off, but there is no picture, no sound, or no backlight There are other Vizio TV models that could be applicable to this method. Message us to find out! Want to send your board to us? Fill out this form. idevicerepairfl.com/mail-in-repairs/ Product Links Thermal P...
iPhone 7 Plus Screen Replacement
Просмотров 612 года назад
Quick video on an iPhone 7 Plus. Removing old broken screen and replacing with a fresh new screen. Nothing fancy.
Microsoft Surface Pro 5 - Screen Removal (w/o breaking)
Просмотров 1174 года назад
Today we have successfully removed the display from a Surface Pro 5 without breaking or cracking any glass along the way. Very excited to share this with you all, it was a tough one.
iPhone, iPad, MacBook Repair - 2525 Howell Branch Rd. Ste 1045, Casselberry, FL 32707
Просмотров 1316 лет назад
The owner speaks about iDevice Repair Orlando and how it gets involved with the tech startups in Orlando.
Samsung Galaxy S7 Screen Repair Casselberry, FL
Просмотров 1916 лет назад
This video is about Samsung S7 Repair
iPad Pro 12.9" Screen Repair in Casselberry, FL
Просмотров 2816 лет назад
iDevice Repair LLC repairs an industry-wide turn away repair since it involves a lot of micro solder. Enjoy the video everyone! Feel free to leave your comments below. Thank you all!
Hey, man. In looking to fix my Wii U, I found your video. This is excellent info, and you earned a like, but I only have one question. What are the specs of the fuse (voltage and amperage) of the fuse you used? I know you provided a link to a suitable replacement, but the link 404's, so I've been looking all over, but the Wii U's specs are sorely missing, since no one seems to care about it, so I can't find the fuse specs. Could you please help me out? Maybe I can find a suitable smd fuse, even if it is a little bit bigger, if the specs match the original fuse, maybe it can work. I'm willing to experiment with my system, seeing as how it is already almost dead, I have nothing to lose. Thanks in advance.
Replace the main board, it still show power, but no pictures, I’m at a lost, any suggestions suggestions, would be greatly appreciated model m49-c1
Nice !!! Well done. Thank you!
😅😅 I'm ) I'M O I'M L I'm i L
Incredible, I have a Wiiu almost a decade ago, which had that same error. but when you turn it on and off several times trying to make it work miraculously, (because sometimes it started without the error) suddenly it never turned on again, could it be that both fuses burned out and that's why it doesn't turn on? I spent years looking for the solution and only now I see this video.. like and subscribe btw, thank you.
just what i needed thank you for the info
Yes, my name is Larry Spencer, and I work criminal investigations into fraud and misuse for the USPS Postal Inspection Team, and we'd like to know a little bit more about your makeshift heat barrier, or cardboard tent that seems to be made entirely out of priority mail flat rate shipping boxes. Misuse of just one of those boxes carries up to a 5 year sentence. It looks like you've got several dozen of them under siege. This video evidence, coupled with your flagrant misuse of the word "action" (.I.E...it's time for some heat gun action), has really caught our attention. Just Kidding, I'm not Larry an investigator, but I did get you pretty good!!!!
My tv is doing same thing and how much will it cost to fix cause I don't want to do it myself
I'll be sending my board to you! D50u-D1. Thanks!
Great! Thank you!
I've only soldered string lights that my old job needed up. What tools would I need to do this repair?
You'll need a microscope, soldering iron, flux, and very fine tweezers
@@IDeviceRepairOrlando Thanks!
el video hubiera sido perfecto si no hubiese puesto su mano estorbando la camara
Piss on vizio 18 month old tv and the back lights go out. Vizio says oh well. Their product is just as crappy as they are. NEVER AGAIN!!!!!
Where did u buy the fuse?
This one may work or may be a little to big but the fuses i've been using have been sourced from doner boards. www.mobilesentrix.com/host-module-for-playstation-4-slim-pro-cuh-1200
Can i do the same with a reworstation , i don't have a machine like yours
It's possible but it will be much more difficult.
I've got the same model, but the LED on the main board isn't lighting up. The standby light comes on then goes out. Power board or Main board? Thanks. Good video.
Sounds like mainboard but you have to check standby voltage first on the power supply.
Was the main board. Thanks.
TOSS IT!! Vizio are CRAP!! My 70 inch had started dying right around the time of the Game of Thrones night battle, so it was god awful. It lasted, but with a splotchy lit screen, til this past Black Friday, when it went completely dark(Timing, right?). Well, when the freight guys showed up with my new Samsung QLED(It was a tossup between Samsung or another Sony Bravia, which I have in bedroom and is still amazing), I asked em if they wanted the old Vizio, which can be somewhat fixed(According to these videos) and the guys immediately asked me if it was a Vizio. I told him that it was and he laughed. He said he spent almost a year exchanging peoples' Vizios and they were legit garbage. It's not worth the time, energy and $$ to repair them, that's for sure. I cannot believe there hasn't been a recall or a class action lawsuit against them yet, tbh.
"Promo SM"
I put new main board in and my tv is still black.
Your TV could have other issues or the board you received is defective.
THANKS! I used a heatgun on the actual heat sink with foil protecting the rest of the board and now the TV is back to working again.
This video helps. I'm currently in the beginning process of trying to fix my old Wii's motherboard my younger self broke. I'm am Amateur but gaining experience as of late. Already brought a donor's wii motherboard so all that is needed now is understanding the best way to remove the parts. 😅
Am impressed am watching you from Ghana west africa
Can you send the link for that specific motherboard please
Depends on model of the TV. If you send the TV model number and serial I can send you the replacement mainboard link. However, it will be out of stock.
Wait so you bake the board?
It's considered a "reflow" the technology it uses is IR heat, not hot air.
Isn't it just better/cheaper to just buy a new board and install it?
These boards are in high demand and very very short in supply.
Pretty sure this may be issue with my sons 43" Vizio. Only difference is with his if I unplug it and hard drain the caps when i turn it back on the screen will work for a few seconds and look perfect. But once a few seconds go by and it heats up the screen goes dark. Its not completely black but you can barely see anything at all. Would this be the same issue? If so what do you charge for this repair? I may be interested in sending the board in for repair.
That would most likely have to do with the light strips
This could be the LEDs.
I'm absolutely amazed, i baked the board for 10 minutes at 400 degrees and it actually worked. I thought it was going to melt or destroy it but it didn't. Amazing
That's awesome to hear!
I did the same after reading your comment and the TV screen works! Amazing.
Broooooo I did the same thing but only for 5 minutes now my tv is working again! 😂 I just put the whole board in the oven no foil or nothing. Just set the board on the oven rack at 400 for 5 minutes and my tv is back 😂😂😂
Hell yeah!
Are you guys being sarcastic or did it actually work. Haha i have the same tv and im wanting to fix it. @@chrispkreme7708
Attempted to fill out your form but I got a permission issue. Please let me know how I can reach out regarding a quote for re-ball or reflow of the board - I have a slightly different model but the board looks almost identical (P502ui-B1E)
idevicerepairfl.com/mail-in-repairs/
I git a m65 c1 ,no sound no displsy no backlight ,power light fades,but i did notice theres suppose to b a light on mainboard and mines not on ,but the optical redlights on
That's mainboard issue.
Hi, I saw your video and I have the same problem with my TV but I don’t have tools to reflow the chip etc. Can you fix the main board. Let me know. Thanks
idevicerepairfl.com/mail-in-repairs/
Thank you
How much to reflow my main board if I send it to you? Same tv..
We offer the repair for $100
Can't i just bridge the fuse, instead of replacing the whole fuse?
That's a temporary fix. If you do that you are risking further damage to your Wii U
The speakers on my M43-C1 keep popping intermittently. Should I replace the speakers? Or the main board?
Do you recall having functIional sounds as if the unit was working, but no video? I have the same issue on another Vizio
The issue could be related to a bad Tcon board or a bad panel.
Does the make the disc not spin?
This issue actually makes the console turn on initially then takes you to an error screen which you can not circumvent.
My vizio logo shows up when I turn it on, but then it goes to a black it’s not faded just straight black screen I already replace the power supply board do you think it could be the main board?
Could i replace the whole disk drive?
Depends on your issue. If it's a logicboard issue then replacing the disc drive will not fix your console.
hi I'd like to send in my M65-C1 board, this looks exactly like my problem. The google docs wouldnt open for me
I have an M65-C1 that has sound but no picture and no backlight. is it likely the same problem as with this TV? if it is the main board, are replacement boards available? is there a way to reflow the chip without a reflow station?
I just watched your video and I have the same issue with my 55" Vizio, I get power with the Vizio emblem but that's it.. my model number is E552VL
Again, you are the man!
Thanks for your help. I got all the way to recovery menu for the wii u and did the software fixes but to no avail. Now I most likely know that unit will take a board level fix to get going again. I will test continuity on the places you said. Thanks a ton for your help! I know I can replace such a part, but without a donor unit, Idk how to go about sourcing the fuse. But then I saw you even linked to the spare part to purchase. Thanks, you're a day saver. Kept me from floundering on this one, and I'm onto the next one now, going to return to my 160-1400 brick at another date. You are the man!!!!
How does a normal person reflow the chip? Is there a way to do this repair at home?
Heat gun baby...
Love your videos M70-C3 which chip should I Reflow ? Thanks in advance
I reflowed the chip but with flashlight, I can see the screen turns green red blue every time I turn it on while there is still no backlight. Is it toast? Vizio model D40f-F1
If you have a Vizio tv with no image upon turn on, but you lightly press on the screen, you see backlights, or pull up on the edge trim, & see backlights, could it be one of the main boards? I have not tried using a flashlight to see if a "Ghost image" appears. Got a hold of a Vizio 50" "V" series (not sure of the pixel ratings) thank you 🤓
No image but working backlights could be a bad mainboard or bad T-con board.
@@IDeviceRepairOrlando yes that sounds right! Wish I had more time to tear it apart and do some tests! Thank you 🤓
Same here; I lightly touched the screen and burst of lights; only difference is, upon turning mine on, I get the huge logo, nothing else and then it turns off, then on again, etc.
@@maryawkward168 Ms Mary, I didn't do any real troubleshooting on that TV. I actually got rid of it! It was a dumpster find to begin with! It could be the power supply board, one of the T-conn boards (a board for synchronizing both sides of the screen), or the LCD screen itself. If it's the screen, you might as well get a new TV. A new replacement screen isn't cheap! It's the most expensive part! As a kind of hobby I look for electronics in dumpsters and curbside stuff - PCs laptops Chromebooks gaming systems tablets... Found 4 Dell Precision towers with Xeon CPUs, & a kind of matching Dell Precision laptop on Friday! Thanks with a hug 🫂
What do you charge to reflow a board?
Estimated price is $99.99 but could change depending on issues.
Very helpful video...well done and instructive. Any chance you can add a link for the "low melt solder" you coat the mounting pins with early in the video?
Yes I can!
What is your ebay store name? I found two in Tucson, reworksrus and Nicks Tv, I assume Nicks is you, so who is the other? Competition?
I have a m65-c1 and the main board does not have a light on when powered on what does this mean?
Sounds like a bad mainboard.