![endurance](/img/default-banner.jpg)
- Видео 3
- Просмотров 46 212
endurance
Нидерланды
Добавлен 15 ноя 2020
Thrust Vector Control 2.0
2.0 stl = www.thingiverse.com/thing:4696135
3.0 stl = www.thingiverse.com/thing:4704860 // 75mm improved version
code =
The diameter of the rocket engine tube is 18mm A, B, and C grade/ class engines are 18 mm in diameter but I will add a 24 mm rocket engine tube for D grade/ class engines( since there is wiggle room for bigger/smaller diameters ).
The outer layer of the model is 64mm for the 66mm body tube that you can buy anywhere. I will add outer layers to order body tube sizes. ( since there is wiggle room for bigger/smaller diameters ).
Requirements :
Servo; SG90 or any servo with the same dimensions (may need to sand the edges of the 3d printed product)
Pushrods;1mm servo pushrods or an...
3.0 stl = www.thingiverse.com/thing:4704860 // 75mm improved version
code =
The diameter of the rocket engine tube is 18mm A, B, and C grade/ class engines are 18 mm in diameter but I will add a 24 mm rocket engine tube for D grade/ class engines( since there is wiggle room for bigger/smaller diameters ).
The outer layer of the model is 64mm for the 66mm body tube that you can buy anywhere. I will add outer layers to order body tube sizes. ( since there is wiggle room for bigger/smaller diameters ).
Requirements :
Servo; SG90 or any servo with the same dimensions (may need to sand the edges of the 3d printed product)
Pushrods;1mm servo pushrods or an...
Просмотров: 4 960
Видео
Arduino gyro-stabilized rocket ( flight computer ) 0.1
Просмотров 37 тыс.3 года назад
This video series is about DIY flight computer. First stabilizing and guiding module. I will upload the code, sketch, and (object file) in the next video because it's not completely finished. update{ code: github.com/endurance-sss/flight-computer-0.1-fin-.git obj : www.thingiverse.com/thing:4679636 } music; Papers Please Death Theme
Keep it up bro, awesome work ill be waiting for the next update 😊
Does the whole breadboard fit into a rocket?
Hello, i loved the design! I am trying to desgin a rocket model as well. I wonder where did you get these servo models or did you make them on your own? Thanks in advance :>
kanka model roket bazında bu işi bitirmişsin seni cani gönülden tebrik ediyor ve tasarımını çalıyorum haberin olsun
HC-05 is not designed to handle high-speed displacement communication, how do you solve it?
In theory if i was to build a air to air missle theoriticaly would this be the sytem to use or.
Just a theory
its really good and how did you connected those can u make a vedio
انا مهتم بهذا الشيء هل لديكم معلومات عن مكونات الكترونيا لدي امنية ان اكون مصنع صواريخ فضائية 😢
Finally GOD made me to see the perfect video❤❤❤. Can you give the coding
HI
How about GPS guided system to this rocket? 😀
What’s on this computer I know that there’s a teensy but what are the three sensors
Where did you use the microSD and Bluetooth module I can’t see them
I see this is 2 years old. Will you ever make a follow-up video? Have you tried putting this on a real rocket to see how it flies?
This is awesome mate!...I wanna do this as my open lab project. Would love if i could get the circuit diagram and connections...😁
Hello,you really really help me,i am trying to make rocket and this help me a lot,can i ask in code there is something writed about led,when i want make project just gyro and 4 servos then i can use this code on it yeah?
and is it possible to program so that the missile hits the target?
Please can we get the code?
Why no uploads
Thank you
Wow....great work. I can't wait to see it in action !
I did one similar.... a great wxplosion happened... so I could not test it well...... My concern by that momen was if the gyro may be affected by the acceleration..... Have you onsidered it in your Project ?
the servo does not fit with out cuting it
Very nice job my bro ....... I would like to know what is your 3D Software please
I've spent the past two/three months working on a project just like this and have made some good progress on the code for it, however I've gotten stuck at one part. Do you know of a way to limit how far the servos are able to turn? Rather than having the sensor make the servos turn 90 degrees whenever it rotates 90 degrees, is there a way to make the servos only rotate +/- 15 degrees until the rocket is stable again?
int sensorValue = // your input value from -90 to 90; // Map the sensor value from -90 to 90 to -15 to 15 int outputValue = map(sensorValue, -90, 90, -15, 15); // Now 'outputValue' is the mapped value within the range of -15 to 15
This is excellent, have you tested it in flight?
You are awasome ....
Which application you use for designing??
Where I can get these?
And can we use this part with trusht vector control 2.0
That is so good! But can you give information about electronics connection please
Take my word with a grain of salt, but read ITAR part 121.1. My interpretation was that code from this project falls under the guided missile section and is thus illegal to share with non-US citizens. I once started a similar project but never really finished because I got busy, but be careful. Most of the video is fine but don’t provide code or CAD files. Again, I could be wrong but better to be safe than in federal prison. Honestly if you just cut out the code section of this video and remove links to CAD and code you should be fine. You’ve done great work here, just be careful with sharing it on the internet. On a side note you should probably cut the scale of the fins down by a factor of three. Drag and lift scale up exponentially with velocity, so small fins with a very small angle of attack can make a large difference in flight path. Additionally, use mechanical linkages instead of direct mount, it could save your servos. Could also cut out that fourth servo and place them in thirds. A little more math to do but you’ve got the spirit to do it. Cheers, Michael Cuthbertson II
Where i can contact you?
Hi, I wanted to ask if it was possible to create this with only two wings, and not four like you did. What would I need to change in the arduino code?
Delete half of it
what's the GPS?
Hi, your subscriber wants to ask a question:- what was the software you opened at 4:20? please answer. Thumbs up 👍
arduino
@@bb-bricks3040 Thanks
What is the Bluetooth and as card reader for.
Can this system be modified so that the stabilizer will keep the rocket at a 45-degree angle instead of straight up? I want to make a rocket that acts more like a missile and want it to stabilize the rocket in a more level flight. Thanks.
How to clear
Code comes error
That's a amazing project! i tried to make it but sadly can't power the servo
hy nice project man can you tell us the arduino code there is no one in the discription
Awesomeness bro
code pls
Next video h_at s__ker that can command this stabilizer
Elon musk would like to know your location 🚀🚀
what library (for MPu6050) did you use?
doesn't compile me
Can you please guide us through the step by step connection of electronics
Do you have a parts list for this build?
like amazon links?
Staplizer integrated graphics card