Видео

@rhdtv2002 it won't leak anymore 😂😎 I still have the "waterwheel" but I never did reinstall it. My refrigerator has not given me any issues since 👍

@ I’m going to do it here at home within the hour. I’m so sick of this dam water leak. It’s messed up some of my wooden floor

@rhdtv2002 it was playing hell with mine to. It's no longer perfectly flat. The grandkids showed me how a ball rolls on the floor now 😪 Don't forget to turn off the water supply first, lol. Good luck and Merry Christmas 🎅

@ thanks. Let’s go fix this thing

@rhdtv2002 if I were close, it would be done and we would be drinking a cold beer! 🤣

@philhaverdink3947 Glad I could help in any way possible.

@Blueberry_bear1 pull the retaining clips, push IN, HOLD the inner sleeve in and pull the water line off, its like a Sharkbite fitting. The flow meter is attached with a metal strap that you need to snip.

ruclips.net/video/ZeJQMWYfy_w/видео.htmlsi=bKxVnigr8vFpOWif

@@martywilsonwilsonenginesho7940 thank you

@Blueberry_bear1 Thanks for the link for others to see how the tubing is held in. It is perfect content for this thread! Appreciate you @Blueberry_bear1 !👍

@Blueberry_bear1 Did you get yours apart and back together?

Thanks! Those Kelford 280R's do sound good and rev and rev and rev! 😎

She "GOES" to 9k and still wants to pull. 😮

Right tool is correct. It takes the margin of error down alot. 👍

@@JohnLayman-y1k Happy I could help everyone else! Thanks for watching! 👀 👍

@DyscoJen Thank you for taking the time to watch the video. Any help I can be makes me smile 👍😊

Paint pen

@treychastain4686 I am 100% about putting out HELPFUL content. It varies on subjects but dam glad to help another thru a situation, it's just what makes me happy! 😊 If a 60 yr old man can do it, MOST people could be more helpful. Thank you for the compliment!

@treychastain4686 You are certainly welcome and thanks for watching me try to do my best at describing the issue and fix! Appreciate that!👍

@lunchladyland9334 Thanks for taking time to watch what I did after my repairman tipped me off on what "I" could do that "He" couldn't! 👍

@jdxnc04 Thanks Jason. I short shifted on this pull for tuning data. Usually, I run her to 8700-9000. She just wants to keep pulling so I don't know when to let her stop 🙅‍♂️

@@martywilsonwilsonenginesho7940 about 100 RPM before the valves float 🤣

@@jdxnc04 that is a VERY TRUE statement. 🤣👍 The 8750 limiter is engaged, for now.🤔

@danrutherford7365 always glad to be helpful to my audience, lol. Thanks for WATCHING!!! 👍

@balletbasicstudios Thanks....after reflecting on all of the day, back then, and thinking about TODAY, we, as an American Republic 🇺🇲,.need to really make sure that we are safe, so it is an important time for important decisions, is what I wanted to say. 👍

For strength, Trump. 💯

@yoda3549 But you can't repalce a life or the facts! Stop the video and read the log, he is a lier. WILLARD I'll never let that happen again without a report. I wish I could thank the driver behind me that saw it all and stopped the driver for me to get 👍

@amans19 That was my whole reason for doing the video, so folks don't have to pay alot of $ just to replace that thing, IF YOU CAN FIND ONE. My repair man couldn't find a replacement part. Thanks for following along, I appreciate it! Marty

@eatmorechicken1064 I really wish I had the time. That is something that's not on my side. My Ole body is breaking down, unfortunately. I've built cars since 1978, it has taken it toll on me. I get a few hours of work done then I'm hurting so I have to stop. It's the same reason I just retired. Can't do it like I used to but thanks for the encouragement 🙏 🙂 When the car is finally tuned, I can give more content 😎

@eatmorechicken1064 I did get one breakin drive done yesterday. The motor only has, maybe 5 hours and 50 miles max so far. My recent tune adjustment made the car respond better, but it is in NO WAY "TUNED". I'll need to hire a pro (the tuner I prefer is KJ). Then the car needs to go to the track for a time slip.

Have you seen the tuning pull video? I'm getting closer ???👍

@@GreenCrim I put a lot of effort into each motor. Thank you! 😉

@@subbassrules If you need any tips, just ask 👍 I have 3 1990s.

@@martywilsonwilsonenginesho7940 Awesome! I had a Laser, a Talon, and a GSX at one point.

@@subbassrules I have ALL of those right now 😁

@@martywilsonwilsonenginesho7940 Nice!

@@subbassrules Thanks. It took me a whole year to bring her back, but I was working. I just retired, and maybe I can spend more time to show more of what I do and the results, be it good or bad. 👍

@@buf0rd Thank you. It has been a long journey.

@renejacques8288 as much as it will hold. Most vacuum pumps max out around 28 hg. Under deceleration, your engine would see around 28-30 hg of vacuum so don't be afraid. 👍

@@mohammedkanan1964 I am glad it helped out. I was puzzled until my repair man came out. 👍

@silverstreak232 Thank you! That is why I made the video. That sucks you can't get ahold if them because I have another 400 SBC that I wanted a set of their 200cc Hydraulic Roller heads too. If I am able to get ahold of someone, I will post it here. Thank you again :)

I received a call back from Flo Tek today, concerning another set of heads only 200cc's. I was sad to find put they don't make a set of 220's with STRAIGHT plugs. The service representative (thanks again Stephanie) and I both agreed that they need to expand that line to include straight plug options, not just angle plug, which burn up my Camaro plug wires. Call them back and leave your name and number like I did. Good luck l! This was on 9/4/2024 Marty

@ricardo5822 I thought the 500HO was nice, then I came across this 700 and it surprised me. The dam thing will do 65mph. Too fast in high for my grandkids, so I put it in LOW and let them have fun. The 700 is definitely more powerful and I didn't realize it was a twin until I was under it putting in the new rear driveshaft. 🤦‍♂️

It is a real easy work around once you look at the back and the components! 🙂 Glad I could post a helpful video!

Well, you know it when an "expert" says "There's no such thing"! BS, I have 2. A 509 casting and this 817 casting, both good 2 bolt main blocks that make a ton of torque! Horsepower isn't everything (but I like it).😎 Thanks for following along! Pops

@@martywilsonwilsonenginesho7940 Did Chevy ever use the 400 block in anything? I think the 400 was a GM block for Pontiacs. I never heard anyone say they had a 400 Chevy engine.

@@martywilsonwilsonenginesho7940 I thought I said "RUclips expert" that was what I meant .🙂

@seetheforest From 1970 to 1980 you could get them in pickups and big cars like the Impala or Caprice or a Wagon. 👍 When I look up parts, it is for a 1978 C30 One Ton Pickup. They also can be found in RV's.

@@martywilsonwilsonenginesho7940 ok that makes sense I just don't think I ever saw one as far as I know. Everything was a 318 or a 350.

A 1992 Eagle Talon TSI AWD Turbo. 60mm turbo, 2150cc injectors, 34lbs boost with an automatic.

Thanks. I try to show usable stuff that doesn't break the bank.

You could do that with the delay timer being started by the first fan, then however long later you set the timer, it could energize the 2nd one. Thanks for taking the time to follow along!

1/4" Ball Valve uxcell Ball Valve Shut-off Valve, 6.4mm Hose Barb to 6.4mm Hose Barb, Hose Pipe Tube Fittings, 180 Degree Operation Handle, Brass Valve, Pack of 1 a.co/d/eeTlzwO Refrigerant Charging Hose uxcell Refrigerant Charging Hose, 1/4 SAE Thread 2.95Ft Length 500PSI Tube HVAC Hoses, for Home Air Conditioner Refrigeration Maintenance, Yellow a.co/d/i2xMx1T Vacuum Gauge WUODAO Fuel Pump Pressure and Vacuum, Carburetor Intake Manifold, and Vacuum Test,Car Fuel Pump and Vacuum Tester Gauge a.co/d/eUeqKBv Vacuum Pump VEVOR 3.5 CFM Vacuum Pump, 1-Stage HVAC Vacuum Pump with Oil, AC Vacuum Pump 134a, 4-Pole Pure Copper Motor-Longer Running Time, for Resin Degassing, Refrigeration Maintenance, Vacuum Package etc. a.co/d/aZxfAU2 PVC Sheet Mega Format Expanded PVC Plastic Sheets - 5" X 7" Rigid Black Sheet for Crafts, Signage, & Displays - Sintra, Celtec PVC Board - Waterproof for Outdoors Use - 1/2" 12mm Thick - 1-Pk-Black a.co/d/6dFTKU0 Brass Hose Nipple U.S. Solid Brass Hose Fitting, Adapter, 1/4" Barb x 1/4" NPT Male Pipe Fittings a.co/d/gLk1ctD Sticky Back Foam Adhesive Backed Foam,Adhesive Foam Padding 4 Inch Long X 4 Inch Wide X1/4 Inch Thick,Foam Padding Sheet for Furniture Cars Speakers (6, 4" x 4" x 1/4") a.co/d/7GBiSOu

@@martywilsonwilsonenginesho7940 Amazing mate, thank you very much

She ran tonight but we found a fuel leak going right onto the header collector so there was pops, coming to the rescue with 10' of 8AN replacement line and fittings. 😎 Stay Tuned for a video. 👍

I can't do anything about it except ask if I can have them all surfaced or send them back myself. I don't own surfacing equipment. 😞

It's a good thing my son has "common sense". He shut her down immediately. It doesn't appear to have done any damage, but we will get to hear the motor fire up again tonight or tomorrow. Thanks for following along this fiasco! 👍 Pops