Видео

Love your fully redundant technique. Just two words I would add. Cast Iron. Give me a cast iron tub every time, all the time. Cast Iron tubs offer unparalleled durability and dependability. Yes Cast Iron is more expensive but the best things are worth the extra price. I've had 2 cast iron tubs installed without major issues.

They used the wrong fitting and also didn’t clearly mark the full insertion depth of the fitting. The fitting they used is marketed for gas/oil and has a different ring, not only that, they were pulled off the market by Viega in 2019. Your client got ripped off.

Great video, I learned from your last video how to install the Tile Redi base. I did it exactly how you did, the plastic, few inches of mortar (the correct type), level and dont touch it for 2 days after. I seen so many videos that were done incorrectly. If they just read the instructions they'll see the way you said to do it was correct. I have never, before last year even put up a picture Frame and took on a full bathroom remodel using your videos as reference. I appreciate you and your videos, love the content, keep em coming!

I used a Tile Redi base pan for my DIY install after watching one of your older videos. No issues after 3 years. Schluter Kerdi seems to be popular now and expensive.

I used a Tile Redi base in my downstairs custom bathroom 8 years ago. Very happy with the product.

Really appreciate your highlighting of Doorwin and the process and the particulars! I’m talking w a rep of theirs now. Did you get installation drawings? How did your subs end up installing the 72x96, with fins or is it attached in the jamb directly through the frame?

Are the larger black panels over the holding tank and the freshwater tank screwed in? It looks like they might be removable if you need more access than the hatches provide. We have a 2004 370 Express and it’s nice to see your videos and the guts of the boat.

Same thing happened to me 3 times! DPF filter clogged with soot! Can t let diesel engines idle, especially in cold weather. Tip: Get a scanner and erase the visible codes then drive 55 mph on a highway with 2,000 rpm for about 50 miles ( 25 miles to and from) and your your vehicke should regen and clean out the soot. Repeat if necessary.Rislone sells a DPF cleaner (green label) that you can add just before your 50 mile regen trip. Again, DON'T LET YOUR VEHICLE IDLE, or the filter will clog up again!

My Dock Pro (which I LOVE when it works) just broke for the 3rd time in 2 years. Considering the 8sleep Pod 4, but $$$. What are your current thoughts, one year in?

Gotta say, these videos have been super helpful for me. I have even reached out on a few occasions for more information. They have always returned my emails. Keep up the great work and congrats on the beautiful house. You deserve it

I used 5 propress fittings on a repair in my home and cleaned the pipes and the fittings and marked the pipe for insertion like I was using shark bite fittings and deburred the pipe as well. After turning on the water, two of the press fittings started leaking and I took the manual press tool that I initially used and pressed it some more. It stopped leaking and kept an eye on it and 4 days later it still held with no leaks.

You can obviously see the copper was not cleaned properly

so you mortar the whole floor after the wire and let it dry? then come back and tile on top of that mortar?

Great Vid thanks! I have the same interior lenses that you have in your house. However I've damaged a couple taking them out .They crack easy. I looked online and they're between 80 and 100 bucks just for the plastic 10" lenses! Any tips where to get them cheaper?? Thanks!

How I can get contact with titi for my order ! Thank you in advance

Not sure if tile to tile requires a threshold

These may be vulnerable to twisting. A video showed someone repositioning a propress elbow using the pipe for leverage and he mentioned that you must re-press the fitting after this occurs.

Hi, where are you located?

Just finishing up the plans on our addition. I’ve been talking to Doorwin since my dad built His house and uses their windows. He loves them. You got the videos on the screens.

Can anyone direct me to any website that will say that the pro press fitting with the yellow dot is for gas lines?

Thanks! This video helped me out lots, I have the same fan.

Supposed to be quiet? Mine was a bitch to put in and it’s not quiet !! Thanks for the installation video 😎

Any chance at all your still hiring? Really interested in learning from you

I turn the heat down before putting the meat in to give it a chance to cook.

It’s happening because these fittings are a POS. It’s just laziness on the plumbers part. When it leaks again after 1 to 8 months out of warranty then and they charge you more money when it should have lasted for 60 more years or even the life of the copper. All these quick fix easy fixes is just as scam !!!!!!!!

All this euro 6 emissions is a load of bollocks that is what’s causing all the problems on vans the DPF it is load of crap China put more emissions out than anyone else in the world they’re not stopping so why should we what the hell does it matter if we have a DPF on our vehicle or not

Do you think that boat could get 1mpg at slower speeds?

Just want to say thanks for this video. Helped me alot with a smooth replacement on my 2016 2500HD. Rides so much better with these 5100’s. The ranchos were completely shot. Should have done it 5yrs ago! Haha

oh come on, you don't need 1h of flamethrower time to light a simple fireplace, this is what happens when you skip boy's scout LOL

I think the tile job looks great around the niche! I do not know if you would have had a little skinny piece of tile above or below, but I think it looks nice as it is! We have well water here with a lot of salt in it. Will that tile trim rust? I know it rusts other metals around here!

While no where near as good as the original Frank Pepe's in New Haven, it's pretty good.

I don't think I've ever heard of cheater board ever being called nor used as actual blocking, I guess it's better than anchors. Although honestly with the finishing your already doing you should have just ran real blocking, worth more as well

Its leaking because YOU did not solder it! Solder it and BE DONE !!!!!!!!!

Subscribed! Just ordered these windows! Do you think a regular piggyback moffet can unload these? Is there specific lift you recommend to install a 700lb section (3 windows built as one unit)?

Thanks for the video! I’m impressed you know more about the product than the company that invented, refined, and warranty it! I say the same thing about oil change intervals on my truck, 3,000 miles?? Really? How about 20,000!

I just signed off on my shop drawings, I’m so excited. Agree with all of this. I had to go back and forth in email for about a month checking everything and double checking it to make corrections and updates. I only ordered windows and all same style, different sizes, which probably made it a little easier for me. I think it would be super helpful if Doorwin would come up with a form for customers to fill out, that indicated what the window size would be and the opening needs to be for said size like here in the states they tell you reduce 1/2 inch up front. Our major error in shop drawings was Doorwin took the window sizes from our plan and added 3/4 inch to height and width for each window opening to accommodate their window. I had to have them reduce the opening size by 3/4 inch to make sure the windows would fit in the openings that are already framed.

This is great. I am planning to replace the old sliding door overlooking the backyard with the french style in-swing door. Can you make a tutorial on how you made sure the measurements are right and some of the pitfalls in the process.

Thanks, mine Doorwin windows and doors are coming this month. Your video is really helpful!!

Good tips, I use a hairdryer on low for 20 seconds to fix my back draft .

how many nm tightening oil sump cap screw?

I’m really glad they have the band instead of the flashing now

too expensive for residential construction imo. Walls alone are 65k..... still have everything else that needs to be done.

Much appreciated!

Excellent video

My 1500 high-top 2.0 gas, driving on Chicago highways has recorded an honest 26 mpg on regular gasoline. Loaded with 3000 plus lbs it was around 23. Flat towing a type 1 VW cross country it ranges between 19 - 22 depending on speed / hills.

Great video! Thanks!

Complete BS information - K, L, & M copper have the same outer diameter (0.875). It's the inner diameter that's different. Propress is rated for all 3 copper diameters. Most likely, incorrect installation or as another mentioned - wrong fitting used (yellow dot at 1:28).

This boy does not know what he is doing. Silicone on edges of board and corners is big no no. It will fail in few years. Read backer board and Tile Redi recommendations - polyurethane based sealant only . ( called RediSealant by manufacturer , but it is same sealant GoBoard uses )

Fluidmaster should have one or two extra rings of different thicknesses to get the seal just right.

Congratulations on your stupidest beautiful roof! Actually been there in just about everything in my life, totally normal.