Видео

Ar video garso takelis buvo įrašytas su šiuo pultu?

can you dive these 8 inch drones? do they handle well?

Does this T7000 glue accept the high temperatures of the VTX? I want to shield the vtx and follow your step by step. I intend to fly in the rain.

Labai įdomu🙂 Ir pastebėjau kad servos neturi būdingo "tiap-liap" lygio servų veikimo garso, įtarių brungumą😂

My throttle service went out twice what aftermarket would you suggest

Nu super! Manau kazkada veliau pravers ir man !

Labas, mane pati domina tokie sklandytuvai. Turiu Radiomaster tx16 , noriu pasidaryti toki sklandytuva. Skraidau su putinuku. gal gali pasidalinti turimais brėžiniais tokio sklandytuvo

If tou keep this up your gonna be on the sex offender list 😵‍💫 lol

But what went wrong ? Was it the illusion of you being high above water but in reality you weren't ? Or was it some other thing ? Would love to know your analysis on this one? I ask because I am currently going head first for walksnail selling out my dji gears. I still have g2 and other stuffs. But planning to sell them stay walksnail. Do you think I am making a mistake ? Or it make sense to you.

In my opinion or whatever I have seen until now, this is most informative and useful on conformal coating. Thank you so much for this.

You have one thing missing and that's silica gel or desiccant which absorbs moisture over time you have to think that moisture has to go somewhere mine works awsome

Can you fit the caddx moonlight kit on that?

Хорошая идея!! И сделать просто😂.Обязательно попробую. Я пытался упрочить раму, наклеяивая полоски металического скотча.😂

Nu super! Visai idomu butu nitro modeli paskraidinti :) Turejau ir ta kamera, bet kazkaip nepagalvojau net 360 video i YT ikelt . Visai idomiai susiziurejo:)

Kas cia per lokacija? Privati?

You missed the small vent on the top.....I have one, works great.

Sill thinking to buy this. Can you tell me the wheelbase motor to motor and how long it is when you fold it? Also if it would fit 9 inch props or 8.5 inch. Thanks alot

Is it worth to buy

A well sealed dryer would work with some peltier or even heat pump condensation device draining water to an external tray. As is these dryers are kind of expensive for effectively a simple electric heater and fan. Still might get one in a combo deal with a printer, seems convenient to use even with the little workaround to went humid air.

Rimtas modeliukas:)

Grazus vaizdai

OMG... Water doesnt evaporate on 55 degres celsius..... Also, water and moisture are totaly different things. This video is too misleading

I made a linear actuator that opens the lid every 30 mins for 10 seconds - designs are over on Thingiverse - it works well!

Super! Naudoju ir as ELRS, tik ne tokius :) Gera vieta skraidymui!

There are two small holes on the top, one with a plug for filament to go through during printing, the other on the clear cover with no plug. I assume the latter is for venting. So there is a vent, but it's too small and doesn't work as intended.

smagiausia matyta lidlinuko modifikacija "A-10 warthog"

Its Just doing a regen.

But why? Walksnail camera coating looks like waste of time and resources (for me) Are you going to dive into the lake like in previous video?

Omo dėsnis I=U/R I=15/2=7.5A R-kartridžo varža 2 omai

Look like puma logo🐆

i dont get it what are you talk about a hole in the top and you can drop in moister bags or drill more holes in the top! heat up fast and very good for higher temperature to dry filament

Why not just open the plug on top? The one were you would put your filament through?

dude open that rubber seal for the filament path and u wont need to keep the lid open.

Interesting video. In practice, I found that it did work pretty well. I put a spool of Hatchbox Tranparent Black that I had forgotten about for a couple of years into it because it would snap at the slightest pressure. 12 hours later it was printing away with no breakae and no stringing. I think the few holes and the leakage around the door are sufficient to let the humidity out. FYI - the room I print in was at 38% relaive humidity and the drier went down to 15%.

just open the plug on top ! that will help !

Nice work! I have just unboxed mine today and this is the first thing that occurred to me as well. My thought is that occasionally a flap should open to release humid air and then close again in order to retain the heat, increase the humidity again and then repeat the process. What you do think?

Nice video! I like the experiment part. Maybe also try drying a dish of water again but this time leave the lid closed and compare. Thanks for sharing!

Great demonstration! This is the same problem as most "dryers" on the market have. While the most manufacturers have worked on the circulation of the warm air inside, still nobody seems to have thought about that the moist air has to be evacuated somehow.

The plug up top serves two purposes, one of which you aren't using, which is to vent when actively drying the filament. Once dry, it can then be filled with a ptfe tube to seal it up and keep hygroscopic filament dry during the printing process

I built mine about a month ago. I absolutely adore it! It's my favorite LR frame I own. I've had it out over 3 miles on the o3 with stock goggles 2 antennas! I highly recommend the Mario 8! If you're in the US, Defiance RC and Pyrodrone both have the frame in stock. I run mine with T-Motor Veloc 3008 1350KV a 65a Skystars F722 stack and 900mhz ELRS. Easy to tune as well! Frame by itself is $99. Im going to buy another one for spare parts.

Those buttons are not hard to press they are time sensitive, so all you have to do is lightly touch them for longer time

Oh man. This is a perfect example of how hard it is to judge your height on still water! Even in the replay it looked like you were a meter above the surface until the water splashed up! Bummer… lost quad club!

Interesting video thinks for posting. I would have liked to see the box with the water run overnight with the lid fully closed. Everyone talks about these as "sealed" boxes, but they are no where near airtight. So it would be nice to see how much water evaporates with the closed box run for 12 hours vs with the lid partially open. THAT comparison would prove the value of your proposal. The mere demonstration of initial lower humidity possibly could indicate LOWER effectiveness because outside drier air is continuously mixing with the humid air around the filament, reducing the humidity of the mixed air. It would be great to see a proper comparison with hourly measures of water left (by weight) and humidity with both closed box and slightly opened box. This would also permit an estimation of the optimal opening to leave to maximize moisture loss from within the box.

RIP

Taip ir nesupratau, kad ten atsitiko

👍

I've never understood how these dryers work. where does the moisture go when the box is fully enclosed. Seems like they just make hot moist air.

Pranas visas klaidas užfiksavo...😁

Normaliai, realybėj atrodė didesnis😅