Видео

Sorry, I have no answer for this question. May need to checkk with PowMr Company

You're welcome

Sorry to hear that Brother. Hope you got it fixed. Take Care

2:54

Hi, Long sound means a beep soubd from the buzzer ? If the inverter is shutting down the inverter when the AC is on it looks like overloading the inverter or having some issue with the AC unit. It is hard to detect the cause from what you have shared. Better show your system to a technician. Thank you and good luck with it.

Yes, it's a good point, Deye inverters support timing but it comes with a high price tag.

Most countrues Yes, but the PowMr Inverter may not have all required certificates for you to get the approval from your electricity provider, therefore you might have to look for a brand like Growatt or Deye (if you need hybrid) but my sujjestion is to have 2 systems On-Grid and Off-Grid seperately. It may requiremore space but in the long run it is more practical.

Hi Brother, People has different view, but I have been using for PowMr for a quite a whilte and it has been able to provide a good service. Actually my friend imported around 50-60 units and the customer service was okay. My advice is dont order from A/Express. Get it from A/Baba where you can get a better deal and a better service.

@diydesk thank you, I'm buying some for 3 houses I'm building outside the country. I will get it from them thanks again.

I am sorry, I don't have a clear answer for you but you can try few things - * Did you try to reset the inverter settings and try it? * Is there anyway you can check Grid Voltage / Freaquency ? * When you have a load connected while grid is connected which power source provide power to the load ? I think it's better to get a video of your issue and share with PowMr team. Wishing you luck with the issue.

Can provide upto 6200W, 500V DC. It will work if you have solar panels that can generate upto 240V DC or more.

Thank you

If the grid feeding option is enabled (hybrid enabled) it keeps the battery for backup during utility loss, and works on grid and solar.

Bhai ye net metering krta hai?

@@talhaahmed6215 option ha. Hybrid mode per

@@muhammadshahzadyousaf1282 mtlb ye lelun tou sell hojaegi? Apne ktne ka lya tha or duty ktni di the?

@@talhaahmed6215 we are using it off grid mode with sub setting. In hybrid mode it feeds extra units to the grid. K model is far better than this with option wise. Which is all in one inverter

Yes, If you have the battery charged, the inverther can run from battery only. I use it from battery daily during night time. With 105Ah x 16 EVE lifepo4 cells I run the house at nigth, 2 Inverter Air Conditions, TV, Lights, sometimes coocking on induction. Early morning around 2 am I connect to Grid power automatically to save some battery power. So this inverter can run well on Battery. If someone needs to know if this can work without battery yes that is possible too but you need to have a stable grid connection and the solar connection. If the sun is low and the usage is high the inverter will use grid power. So we need to have a grid connected. (this is required only during batterless operation)

@@diydesk Thanks for your response Sir mine it's doesn't work from batteries only the problem is when I plug a fridge my inverter the fan start to run non stop immediately so when I plug small appliances like charging phones it doesn't give me a problem so currently I don't have solar panels and electricity so I connected my inverter in 4 12v batteries (parallel) as my inverter is 12v so the batteries are fully charged I use a generator to charge them then plug inverter I tried many things even to adjust the perimeter it didn't work out and it doesn't show any faulty sign but it can't run heavy appliances as fridge I'm talking about is the any thing I'm missing please advise me 😔?

Can you please explain more. Do you want this instead of 5000es ?

Hola, Has planteado un buen punto. Diferentes ingenieros suelen recomendar varios tipos de sistemas de puesta a tierra. En primer lugar, no soy ingeniero, pero tengo algunos conocimientos a partir de diversas certificaciones. He leído mucho y discutido estos temas con ingenieros. La mejor solución práctica que he recopilado de estas discusiones es tener una única puesta a tierra para toda la casa. Si tienes un buen cable de tierra, puedes usarlo. Si no estás seguro de la calidad de tu tierra actual, deberías hacerla revisar por un profesional. Si necesitas instalar una tierra separada, asegúrate de que haya al menos una distancia de 8-9 metros entre la nueva tierra y la existente. ¡Espero que esto te ayude!

Hi Dear, thanks for the valuable comment. Just to be clear that we both have the same idea. This inverter feeds power to the grid using the grid input connection not the output.

@@diydesk No, sorry - you are wrong here. Grid input means it takes power from the grid and delivers it to its own output - its just a bypass for PV/Battery. Hope you understand.

​@@rilosvideos877 I have confirmed from the manufacturer (PowMr) the unit supports grid tied operation and it feeds back the excess generated power back to the grid via AC input line hence the breaker is rated at 50A. I have yet to try it on my own unit after the net metering is installed. Thanks.

Thanks for reaching out. Sorry, I am not sure of that. Hope someone will respond to you soon.

@@diydesk No problems, thanks for the reply. I think if I turn hybrid off and have it in SUB mode it should do what I want. Solar first then batteries and if I turn the generator on it will take power from it before the batteries. I'm just hoping it won't cause an error if you try to put it in SUB mode without the generator turned on.

Hi, Here's some details. Inverter Maximum PV voltake is 500 Volts. * 575W JA Solar panel comes with Open Circuit 51.3 volts. * 575W Canadian Solar panel comes with Open Circuit 52 volts. Therefore, without the panel details it is hard to give you an exact answer but most 575W panel specifications show the voltage level over 50. Which makes it go higher than the inverter supported voltage when used in series. One of my friends are using Canadian Solar 550W (49.6V) x 10 which becomes 496 volts in total. It looks like a good match for the inverter. I suggest you stick to inverter specifications.

@@diydesk we connected 575 watt 10 plates and voltage is 480-486 maximum.

Can connect up to 10 460 - 550 panels in series

@@diydesk thanks, my installer made 02 strings of 5/5 575 watt panels and connected in parallel. i have maximum voltage about 235 & inverter trips if heavy load is applied i.e. 3000 watts. note that i have not connected the batteries yet. is my settings is optimum or needs to be changed.

@@diydesk what about 575 watt 10 panels?

Los videos son solo en inglés, lo siento por eso.

Yes, it can

Does the excess solar harvest feeds directly to grid? Or there is an option to enable or disable feeding power to the grid?

Did you try it? Very interested to hear your results! Bet it made Wooooom!

It can be set as needed

settings please?

Mostly based on the voltage passing through, the seller might be able to help you with that.

Yes, I have a sonoff tem sensor inside the inverter. It helps me monitor the temperature. The best I have noticed is that the filter needs replacing in less than two weeks.

My inverter was having no2 Error Protected with coating Still again no2 Dust created

Although it was coated After 9 months as gain no2 error Stopped with burst sound And stopped I don't know how much it will cost my 5000Es Growatt

Similar minds ♥️♥️

Yes, it does. You may need some approvals form your grid provider

Was it a question ❓ sorry not clear for me

@@diydesk You said "try to awoid models that end with N". But u dont say why.... I have a POW-HVM3.2H-24V-N. Thanx

All good, thanks for checking

You can

Should be possible but if you can share more details I can have a look. Also, make sure to set the charger Ams according to the battery controller

Glad it was helpful!

Yes, correct

@@diydesk on hybrid mode, is the ac output to the grid comes form AC in bidirectional?

Yes

@@diydesk Do you know of a device that converts the 1-Phase 220V --> 2-Phase 120V?

Thank you 🙏

Functions are both same but there was a huge price difference during the time of the video was updated. When I checked with PowMr they said the N is but low quality and that's why the price is less. But now the model with N seems to be the new model. I am not 100% sure of this place double check with PowMr.

Responded to your previous comment, please check.

You may need to install the basic protection devices and the isobars. Please follow the wiring video on my channel. It will give you a better understanding. Stay safe and stay Powered 🙏

I have read some articles stating to get a transformer to lower it to 120V.@@diydesk

The inverter can be set to 120 check with the seller before you purchase

Yes the current limits the output. Just for rough calculation multiply the output amp by your grid volte. For example if the amp is set to 10A and the grid is 230V output will not exceed 10*230=2300W

No matter what setting is set if you enable hybrid mode to output to grid it will change to SUB. But if you change SUB/ SBU from the app it get confused, so don't use the app for settings changing. What do you mean there's two output's can you share a picture of the inverter connection side?

The manual is clear. The second output functions when batt is low to provide lighting during blackout etc. You can simply wire the 2nd output to an emergency light near the inverter to provide light during blackout. Note, the 2nd output works only when batt is low (I think default setting is 20V in 24V system).

Hello, yes with the information you have provided this inverter should work and export extra power to the grid. Few things to check - * Set inverter operating voltage to 240 AC * Enable Hybrid mode Regarding the wiring diagram you can check the video that is shared on the channel for Off-Grid Inverter wiring. There's no additional devices required unless your grid power provider request you to add a isolator externally. All the best with your installation.

@@diydesk do this and you will destroy your inverter at once! Its NOT a grid-tied inverter! Just bypass function - it takes power from the grid, not vice versa!

Powmr not a grid tied. It only use the bypass mode. Ac in going to the main load and and load 2? If the solar and battery is enough. It will supply main load and load 2. If not it will bypass in which ac in supply the the 2 load output.

What is your requirement?

@@diydesk I want an off-grid system, but during the rainy season it could be rainy/cloudy for days, so, being on-grid can't be avoided (it's cheaper to get connected to the grid than buying a generator).

They usually share the WhatsApp number/s when you purchase through AliBaba. If not you can use the chat option.

Be very careful with POWMr. This company is not reliable. I bought them a micro-inverter. After 6 months, it was out of order. So, it was the hell during 2 weeks to join them. Then, hell again to claim for guarantee : they refused and asked me to proceed to many tests and claimed for video and this and that.. Finally, they did not do anything. 85€ direct to the bin Don't buy anything to this company

Please check this product link powmr.com/products/hybrid-inverter-charger-5000w-48vdc-110vac-for-parallel?fbclid=IwAR35XSHkMyVNKQ-OLyhlkZMa_bAPM345g_yfH6lirWE8ZGulxQmiL6wF9CA Link for the English Manual - cdn.shopify.com/s/files/1/0746/0415/1079/files/POW-SunSmart-SP5K-user-manual_6fb37499-6e98-4f67-8288-e613efd75941.pdf?v=1686636740

Thank you for your feedback! We're delighted to hear that you found the explanation of the components and their connectivity in the solar panel system helpful. Ensuring you understand the purpose and safety tips for each device is our top priority. If you have any more questions or need further assistance, please feel free to ask. We're here to help you with your solar journey!

Có thể lấy điện từ lưới để bù. Trên màn hình hiển thị sẽ có hai đường. Một đường đi từ biến tần đến tải và đường còn lại đi từ lưới đến tải. Tôi đã bật chế độ Liên kết lưới trong Cài đặt 37. Vì vậy vào ban đêm, nó lấy điện từ lưới. Nhưng tôi tự tắt nguồn đầu vào lưới để nó kết nối với pin. Khi bạn chuyển sang chế độ Hybrid trong Cài đặt 37, bất kể bạn chọn cài đặt nào trong Cài đặt Một (USB/SUB/SBU), nó sẽ chuyển sang SUB. Hy vọng câu trả lời của tôi đã rõ ràng. Liên kết hình ảnh - i.imgur.com/W56Q5oC.png -------------------------------------------------- It can draw electricity from the grid to compensate. On the display screen, there will be two lines. One line goes from the inverter to the load, and the other goes from the grid to the load. I have enabled Grid Tie mode in Setting 37. So, at night, it takes power from the grid. However, I manually turn off the grid input so it connects to the battery. When you switch to Hybrid mode in Setting 37, no matter which setting you select in Setting One (USB/SUB/SBU), it changes to SUB. I hope my answer is clear. Image Link- i.imgur.com/W56Q5oC.png