- Видео 7
- Просмотров 265 807
smallr
Добавлен 11 ноя 2013
SFF
NCASE M2 - surfing the wave
Reupload: unfortunately the first upload had sound problems, applied NR and added cool songs!
This build was definitely a good challenge! Attempting build 9 from NCASE website with 120mm RGB fans. Everything is fitting nicely in the M2 but getting the vertical gpu without the bracket was a bit of a tricky situation, in the end the GPU is secured and doesn't move! I love the ProArt cards, Its timeless and beautifully crafted design makes it really stand out, and working with it is always a pleasure.
This build has been made in collaboration with ASUS, huge thanks to them for providing a few of the parts featured in this video.
Specs:
- Ryzen 9950X
- 96Gb of Crucial Pro DDR5 5600
- ASUS PRIME ...
This build was definitely a good challenge! Attempting build 9 from NCASE website with 120mm RGB fans. Everything is fitting nicely in the M2 but getting the vertical gpu without the bracket was a bit of a tricky situation, in the end the GPU is secured and doesn't move! I love the ProArt cards, Its timeless and beautifully crafted design makes it really stand out, and working with it is always a pleasure.
This build has been made in collaboration with ASUS, huge thanks to them for providing a few of the parts featured in this video.
Specs:
- Ryzen 9950X
- 96Gb of Crucial Pro DDR5 5600
- ASUS PRIME ...
Просмотров: 18 547
Видео
The Art of Building Computers - COOJ Sparrow MQ6
Просмотров 22 тыс.14 дней назад
This case is truly a work of art! Crafted from a single molded piece of aluminum, the COOJ MQ6 is definitely unique. I really wanted to get my hands on that stunning case and give it a go to build it, so far I'm really impressed! I hope the video will inspire you! - Ryzen 7900 (12 cores / 24 threads) - 32Gb of TCREATE DDR5 6000MHz. - Noctua NF L12S CPU cooler - GIGABYTE X870i AORUS PRO ICE moth...
Hot rod computer - VELKA 3
Просмотров 106 тыс.2 месяца назад
I really wanted to try this... I thought it would be funny to make a build that's not supposed to fit the case, I bought two extra side panels and fit a IS-55. In the end with the Noctua NF A12x15 I think it looks cool. I really wanted to try the lian li uni fan TL 120 LCD inside it, just because these fans looks cool and I thought the temperature sensor would look interesting, but in the end i...
SFF perfection - NCASE M2
Просмотров 46 тыс.2 месяца назад
The ncase M2 is definitely one of the best case I've ever worked with, and I'm really impressed by all the possibilities it offers. I can't wait to dive into more projects with it! Specs: - Ryzen 9950X - 96Gb of Crucial Pro DDR5 5600 - Noctua NH-D12L chromax.Black - Asus ROG Strix B650E motherboard - Total 6Tb storage (4Tb 2Tb nvme crucial P3 Plus) - ASUS ProArt GeForce RTX™ 4070 Ti Super - COR...
ProArt build - Fractal Terra
Просмотров 48 тыс.3 месяца назад
Specs: - Ryzen 7900 (12 cores / 24 threads) - 96Gb of Crucial Pro DDR5 5600 - Thermalright AXP120-X67 Noctua NF-A12x15 chromax.Black - Asus ROG Strix B650E motherboard - Total 6Tb storage (4Tb 2Tb nvme crucial P3 Plus) - ASUS ProArt GeForce RTX™ 4070 Ti Super - CORSAIR SF850 850W (2024) power suply. Fractal Terra case Timecodes: 0:00 - motherboard setup 1:54 - cpu cooler setup 2:41 - cpu fan se...
Tiny workstation - Velkase Velka 3
Просмотров 25 тыс.3 месяца назад
I built this computer a few months ago and I've been really enjoying it, so I thought it would be fun to make a video showing how it all came together. This is my daily driver, and I use it for my work as a 3D artist! All the components have been carefully selected to withstand the limitations of this particular case (Velkase Velka 3 rev 3.0). - Ryzen 7900 (12 cores / 24 threads) - 96Gb of Cruc...
A gem of a computer!!!! I don't understand why gamers are still building computers the size of cabinets....to kick them???
did youuse the accesoirs for vgpu mounting from ncase? was wondering because ncase vgpu kits are sold out on thier web site. what do i need? would it work with a chunky gpu too?
Which PCIE riser did you purchase? The one from Ncase or third party? I like those silver standoffs in the back too.
Adorable and powerful!
I want to personally thank you for showing me how to properly install the NH-L12S on a Gigabyte X870 Aorus Pro Ice. I was struggling so hard to figure out how but that was with the board already in the case. Much better outside and then sliding the fan in after was a great touch. Great build. Enjoying my 9800X3D in a fractal ridge now.
How to temps perform ? Just bought myself the M2 Grater.
Did you used the right angled psu extension cable?
Also for the top mounted radiator did you have to purchase the radiator bracket?
@@dubblo7905 no there is already one radiator bracket included, psu extension is stock.
Assembling some off the shelf components in the exact way they were designed is art? Mighty bold statement.
GRATE video (Pun intended). This is almost the EXACT config I'm looking to do! This is a really well done video and because of it, might cost me a bunch of money ;) Question for you, if you installed the GPU in the standard config and lowered the PSU/MB a bit, do you think a 240/280 AIO would fit in the top?
😂Thanks mate! It should fit with no fans at the bottom (tight fit using 12x25 fans on the AIO, nice fit using 12x15 fans). Also my advice would be to get the 8mm angled feets just to have more breathing room for the GPU. if you check my latest video I added a AIO with 12x28mm fans at the top and bottom and there is room but not that much.
one lil' curious from me...... are this case backpack-able?
You would need a large backpack...
@@smallrtech i see i see i assumed, this case above 15litres right?? thanks for confirming
Damn, I’ve only seen pics of the black Ncase but it looks even better in the video
Where did you get the gpu vertical mount?
You think it would be able to fit a 3 slot GPU in this configuration?
Could you not mount a 5090 or 5080 fe horizontally with this? It looks like the space is there.
@@Darkhorse1239xf nope, without the AIO probably but with the AIO impossible, there is only one slot available in this configuration
@ i see but with an itx board i can’t see why it couldn’t be done? The motherboard could just be lowered by a couple screws.
Consider flipping your bottom fans to exhaust.
Super clean itx build….man the itch is getting harder to ignore 😂
Same here. I have absolutely no justifications to spend the money on rebuilding my pc but these builds are too clean
What is that song name ?
Great video, want this exact same setup
Thanks mate!
I have this case with everything but a video card sitting on a table, assembling this weekend. Will use my old computer until reviews for AMD new GPUs come out. anyway great video.
Good choice! Crossing fingers for that 9070xt to be a good card!!
Is the part you used at 7:53 included with the motherboard or the case? Or do you have a link? Do you feel like it was helpful?
It's part from the motherboard :)
it's a daughterboard included with the mobo
Well done!🎉
asus sponsor much?
Never thought about using 240mm instead of 280mm I have. That will give me more room for cable management. Also raising the gpu and thus making rooms for bottom mounted fans is a great idea. With some tinkering, I'm tempted to build a second M2 with a RTX 5090 FE if that unicorn ever appears in the forest. Well done.
It doesn't need more room for cable management. I got a LF3 280 in it no problem as far as "cables" the hard part is the fact the LF3 is thicker.
I would prefer bottom fans set as intake rather than exhaust.
@@jacksontan9541 They are! They are reverse blade fans
@@smallrtech okay makes sense cos i was wondering the same
I have the same setup in the M2! Very nicely built! What is the name of the holder for the graphics card?
@@KaitozTV Thanks mate! The gou support bracket is this one: a.co/d/eCqTjmS
Now we want FormD T1!
soon 😉
do you keep it open?
Don't really like this wave. It's dumping 300W of heat directly into the CPU radiator. Side mesh panel will collect dust on the GPU portion and will be highly visible. Glass should be there instead, but then it's choking the GPU. It's a stupid wave.
Lol. Hater. Clean your house and pc
For high performance components in such a tiny enclosure as the M2, a negative pressure system like the one in the video is really the only way to maximize performance for all the components. Also, having the radiator next to the GPU is a non-issue; you only need to care about getting the hot air inside of the case out of it in order to not thermal throttle any of your devices. Having the top and bottom fans alienated with the GPU fins (as seen on the video) as well as the PSU exhaust will help to get all that hot air out of the system.
It’s all about the airflow through the case. How close the hardware is doesn’t make too much of a difference
Lol what itx case do you think doesn’t have those problems
Same motherboard, same case. Using a 9800X3D tho.
Damn that mobo design
how much would i build like this cost approx?
Around 3,800US
@@addavidlin its not even 3k US let alone 3.8k. Closer to 2.8k
@@addavidlin thanks
@ yeah i feel like it should be around $2.8 k thanks
Which riser cable do you have there?
@@marchufnagel9068 Brand is Linkup, Pcie 5, 5cm long, right angle 90°
@@smallrtechwhere did you get the GPU mounting hardware to raise it up higher? I’ve been wanting to do the same with mine.
@@branbudd123 amazon, 3x25+6 (m3 25mm) standoffs, make sure to have slim ones, it's quite a tight fit. approx 8 bucks.
does 5:00 and 9:00 come with the case + do i have to get the same adapter to get a power button at the back or isnt there a stock on in the front on the regular m2 u think switching the noctua fans will be quieter and better cooling u also mentioned adding an extra fan where would u place it
the power cable and gpu bracket comes with the case, but you need to buy separately those silver standoffs I added to offset the gpu (they are m3 25mm standoffs). Switching to noctua might help with cable management and noise profile but will not perform better in terms of temperatures, those TR120 fans are performing really well when it comes to cooling. There is no space for a 5th fan unfortunately.
No thermal paste 😢
new cooler always comes with pre-installed thermal paste on the sink.
wut?
What length standoffs did you end up using to raise the gpu?
3x25+6 (m3 25mm) make sure to have slim ones, it's quite a tight fit.
Thinking about getting the M2 for my next build. Does the daughter board come with it? Any extras you recommend getting with it?
This build has been made using the stock M2 grater. I would recommend adding an extra fan/radiator bracket and the longer feets (8mm angled). I wanted them for this build for the bottom fans to have a better intake but they are still in the mail.
@@smallrtech noted! Planning on just using air cooling for my 7800x3D as I'm downsizing from an NZXT H9 flow. Good tips and excellent vids, keep it up!
@@Jera.. Thanks mate!
@@smallrtechThis is the layout I was planning as well, but have been debating if I actually need the extra fan bracket. Could you explain how it would be a better intake? It's my understanding that you can mount fans to the bottom of the case without one, and the included bracket is used up top for the radiator.
Audio is much more pleasing 👍 Also tested out 10cm riser and yeah it was too big 😅
Thanks so much mate!! yeah, made the same mistake unfortunately, the one I used in the video is thise one: LINKUP - PCIE 5.0 Riser Cable, Right angle, black 5cm