Видео

I’ve got a 2019 and above 50mph this happens when I go over railroad tracks that cut across the road at an acute angle. Going the other way does not do this. Very strange.

This is by far the best video on Super Duty can mounts replacement on RUclips.it explains all of the options, even the Ford service manual, and shows most of them being tried. Of course, every truck will be different depending on its age and concision, but this video is the one I would recommend for getting the best info. Well done!

How did you solve it ? 2 garage visit done , they change everything loose they could find , and still doing it .

You know , those turkeys are someone's grandkids ...🦃😮

Excellent videos, I have been a Mittleider gardener for over 20 years.

SABELLCO is the best lock for the tailgste hinge.

🤘Bar7ranch🤘

huntin from a blind aint huntin

sounds more like a hobby farm.

Thanks for sharing! Typical about the gopros in our Texas heat - they don't do well unless you turn the resolution down to 1080p and who wants to do that? Bummer water restrictions killed an otherwise good garden. When we finally get our own homestead I definitely want to have our own well.

Good vid, those panel retainer clips will usually come out with your fingernails. not sure about Honda, but the Toyota ones even have a recessed area on top that's just the right size for a fingernail. Once you pop the top, they'll nearly fall out. Toyotas and Hondas are 75% 10mm fasteners and quick clips, lol. EDIT: Also, from all I'm reading and watching, the Dorman 590-440 is the best non-factory option for price/value ($180). EDIT2: Again, not sure about Honda, but I've reused these push fasteners several times over, even on the grill and shroud housing under the hood of my Tundra. In my experience, they're good until they just break. Again, could just be a Toyota thing, I guess.

I was looking to put 3X versions on a bolt and single shot 400L and 350L. Googled it, and lo and behold, a good old friend putting one on his Henry. Great vid Rob, and great channel, hope all is well! -Jay

What is the bearing number? I have a 2017 Honda Accord 4cyl. Thanks, Jim

i go by the milage every 5 thousand miles with full synthetic oil

Plasti Dip Spray. I use it on all Pick and Pluck Cases. It’s amazing

Never had this problem with my 03 f250 6.8. Solid front axle with 160k miles on it now. Then again my truck is rocking leaf springs seems to me that this really only was a problem when they went to the coil springs on the super duties.

Good video. I learned a lot many thanks KS

fire video guys everything is mad clear and perfect to understand thank you

Well done. Have you checked the bearing size for the idle pulley?

100% right about doing it for cheaper at an oil change place. You might end up spending alittle more money doing it yourself but at least you know for sure the job is done the right way

i have the same gun. didnt work. had to switch to a air gun. still working on it.

Did my 2013 F250 King Ranch and a world of difference. Took me 3 days to get it done working on it after work. My kit was the $300 silicone that works well and bought the Dorman bolts so far. Took the savings and installed Rough Country E-boards that are awesome for my short wife.

Flip the flag unless you are displaying it to the outside...please. The "Union"..Field of blue with stars..is always on it's OWN right AS DISPLAYED. If it's a soldier, with a rifle..at "right shoulder, arms"...where is the Union at? Just saying. Otherwise..Well Done. Salutes

had loose studs bet bod & frame gmc. Jimmy

11:52 the "Spark plug hole" is there so you can use a spark plug socket, its not meant for "full access" this way you can use a regular spark plug socket with direct unobstructed access to it , and not have to mess around with tiny turns with an open ended wrench.

Thanks to FJB, the price in June 2024 is $579.00 at HomoDepot. 🖕🇨🇳

How did your Tactacam do with Texas heat? Good video!!! Thx for sharing your info.

Did it actually take you 1.5-hours to assemble? It took me 3-hours but I wasted 1/2 hour because the table holes didn’t align properly. Surprisingly, it wasn’t missing any parts. The BILT app was helpful. My thermometer does not leak smoke. My lid fits perfectly. FJB 🖕🇨🇳

I love your approach and attitude! Thank you for the video, which I found after messing up one captive nut --- it's right behind the seat (2010 Plain Jane F250), and I can cut the bolt and pull it out from the top. The other 5 I fretted about a LOT after this and other posts. I have easy access to all of them though. I hit them with a air-acetylene torch (something EVERYONE needs to own) for about a minute and then used an impact wrench. All 5 others came out easily. And this is a Coastal Maine truck since 2012. Now I'm fretting a bit about removing the parts and installing the new ones..... two days ago replaced all the bed rails and shocks, looking forward to a better ride all around.

Thanks for the Review, even though older I wanted to see it work. They are on sale now for $199.00 and with Military discount almost as cheap as renting one for the day. Appreciate it. Nice Buck.

My 1984C locked and jammed today. Half cycled. Your video helped me disassemble it and clear the jam. Not the first time this happened, but, the first time I attempted the fix. The round would not move until the lever was taken out. I did remove the tube, etc. Every thing you showed was important to the process. Thank you. Now I can fix this jam…

$100k for a truck that wants to twerk instead of drive

Disculpe es necesario cambiar toda la pantalla o solo el cristal? para que detecte el touch.

Nice. I have never done the Micros myself. I always have bought the packs! I used Calcium Nitrate for my fast acting calcium. I have tried calcium chloride, but it get warm when you water it in and I have problems with it getting hard. I still use Lime in my preplant and put a little in my weekly feed as well, but it is very slow acting and takes a while to become bio-available to the plant. Jacob Mittleider used calcium nitrate in his original books as well as a supplement for treating deficiencies, just do try to tell Jim Kennard that or you will be banned.

I replaced my mounts with S&B bushings on my 2007 Ford f250. My truck was harder to do because you have to remove the seats and pull back carpet to get bolts out. It was a job, I had 2 bolts hard to remove, 0ne inside front frame next to the headlight, the other one was in the rear cab. You cannot use a impack, only a pry bar, did mine w/o heat just muscles. Gotter done December 2022 rides very smooth.👍

95% of chevy’s are still on the road today. The other 5% made it home

Great video. If you run synthetic oil is there a longer life oil filter for it

Thank God you had the high octane stuff... LOL

Great video. About to tackle this job tomorrow. Noticed driver front side bolt is broken and passenger front bolt head is stripped. 😅. Seems to be a common problem on most videos.

About useless as a box of rocks, and too much work. I have 1

This video is 9 yrs old. He said the filters were $55. 2024 oreilys $100.

I'd love to know how these held up. I wanted to get the spinning base but geez it was $60. So I got on you tube and found you.

Well, now I know why mine blows blue smoke thru my entire yard! That blue cloud surrounded me to where, in order to breath, I needed to walk away from the machine. I wasn't laying the handles back on my driveway to check the oil level. The machine was standing upright on its wheels....LOL Thanks for the tips and after over-wintering the unit, she started up after three pulls. Still works great after three years. -- *SUBSCRIBED!* --

Is it still workin? or has it broken down and been tossed in the trash yet?

Is this a recall?

In central California, there are small lots of land, some 2.5 acres or so, dedicated to both crop growing as well as live-stock raising, which has raised the question of what that would be considered, farm or ranch? Thanks for opening the discussion!

Great! I used this video to remove my FCIM. The dealer didn’t know what would happen. Now I do I want to post this since the replacement part is back ordered. With the FCIM disconnected the car starts, drives, you can control the radio from the touchscreen. The problem is that as a safety feature the system defaults to front defroster on, full fan, full heat. You cannot control this and I got very uncomfortable in 10 minutes. Mine is a 2013 Explorer Limited

It works..went to war with my fireants over the weekend, it was a massacre..😊

How long did they last?

how much man? i got lotsa colored sunflower seed