Видео

Good info… my Jeep is missing that valve… I’m gonig to buy it rings now thank you… 💯👍🏽

There is no good reason for rust free cherokees to end up in junkyards 🙃 I live in the midwest and nothing clean ends up in a yard..

Do you know the inner diameter of the "proper" bushings? I got a pair of bushings branded "Precision Chassis K3128" which measure 11mm inside and got no bumps. I haven't taken off the old ones yet. I got them from O'Reilly's since they didn't have the Moog in stock. So maybe this is providential.

So I have a 2012 kk sport. Hard start when warmed up, puff of white smoke when engine turns over. I have a p0172 ( running rich bank 1) and I’m being told I have a misfire in cylinder 4. Compression is good o2 sensors are good ( info gleaned from live scan) tech has looked at everything and is stumped, any thoughts on what is causing it to run rich?

Attach and torque the banjo bolts before putting the caliper on the rotor.

Great video, I appreciate the effort you put into making it.

También le voy a remplazar el reloj resorte 😅

Such a pain in the neck to get those out.

I was totally stuck as I couldn't turn my key either. I watched several videos & I felt like an idiot for how simple they made it look. I hammer did the trick for me after 6 or 7 light whacks. Not sure how my screwdriver finally found the button, but out popped the cylinder! 😊 Thanks! 99 TJ

Thanks. My dad got a 1993 jeep Cherokee for me. It’s in pretty good condition and we’re working together to fix it up for me. The best thing a father can do for his teen. ❤

I just did the plugs on my moms 2017 outback and the back drivers side was the biggest pain, getting all the right length extensions together and then back out was the worst, I took the battery and tray out, I cant imagine doing it with that in place. I have a 06 STi and I guess its about the same.

I have a quick question you did a video a while back on a 1996 jeep I have one also it’s the sport Cherokee 2 Wheel drive and wanted to know what kind of oil it would use

Don't pay any attention to the negative comments. We appreciate your videos. They are all helpful to us. Your video on XJ door handle adjustment and vent window removal saved me a ton of time trying to figure it out on my own. So thank you and please keep videos coming!

My cruise turns on and can be set, it I hit resume after 25 mph, it will try for a second and just start to accelerate and then stop and turn off the cruise indicator light on the dash.

Great video, I'm going to give it a go on my 2019 outback. They want $3,325 dollars for the driver's seat in the dealers!

That's not a good sound

That is a $9 air chisel. Use a $50-100 next time and you'll see the difference.

I have a 2013 WK2 and notice when its hot out at certain times i dont always feel i get the best or coldest air. Refrigerant is good, was wondering if it was the Compressor but after seeing this im curious to know if its the Actuator now hmmm. How did you figure it may have been this issue for you?

I just snugged the bolts i don't have a torque wrench . 😂

I wonder how much difference it makes with all the weight on the vehicle instead of just putting the bolt in? I imagine if multiple companies are using the same design they are doing it for a reason?

Great video and informative. My garage charged me $259.55 for the job……….☹️ Included a gas cap and seal 🤯

i bought one last week it is not work with my 2019 toyota highlander xle awd please c u give me some idea?

Thanks for the video. I need to do this for my 2014 Jeep Grand Cherokee Ecodiesel on cylinder #2. My part is a little different but your process looks like what I need to do. My question is, is the soldering part mandatory and if so do you recommend a specific iron. Thanks in advance

Curious, how long did this take you in total? I am a DIY guy as well, but only to a point.

Im hear for research. My lady heard i was taking a four day weekend and wants me to change spark plugs in her car smh. Thanks for showing me what im up against.

Hi, do I disconnect the fan wire connector, do I just push in above the black wire- I can't see properly in mine, thanks .

Gracias amigo!!! Viendo tu video hice el cambio en mi jeep de la misma pieza!!! Gracias por compartir tu video con nosotros.

Very helpful man! Thank you!

Awesome! Worked for me thanks

How is the driver seat? Does it sit too high or is it manageable?

Could this also be why mine doesn’t work on high but not rest are fine

Thanks very much. Great video. Watching from New Zealand.

Can you send a link to the speakers you used please!?

When you say the torque is 30 and 35, I just wanted to clarify that is ft lbs not inch lbs right?

Great Channel Swat. We have a red 96 Country we are restoring. Yours is so mint. I can't help to notice the Virginia plates. We are in Richmond and trying to connect with fellow XJ'rs

Must be nice with absolutely no rust

I totally agree and recommend the solid lugnuts.

You can by a flip sockets that have 1/2 sizes.. example 19.5mm/21.5mm

Also, I don’t have fogs installed, would it make sense for me to do the harness upgrade then install new fog lights since the new harness has wiring for fog lights? I’ll have to get fog lights AND the switch panel from a picknpull, but would that be my best order of operations?

Do you need to keep the old harness/plug old harness into new harness? Why not just out with the old, in with the new?

So what’s the cost vs main benefits of doing this? Great video

Wow, you're lucky yours came off so clean.

Hey Swat! I am doing the same move on my 1996 jeep 2dr sport. I found wire harness from a similar year at the JY. I tested all the lights on my rig. I also installed the switch. I also have the relays. Now the turn signals, side markers and headlights work with the JY harness, but when I used a circuit tester on the fog light wires, no signal. I have not acquired the fog lights yet. also the Fog light switch doesn't illuminate, I did put led bulbs in there. Are there fuses that need to be placed in the PDM under the hood or the under the dash to complete addition?

Hit the key several times, think it's stuck between on and off, and that might be why it's not working. Does anyone know what to do now. My windows are stuck down. Do I need to replace the entire ignition?

Super excited to watch you work on this beauty!

What socket size do I need to remove the oil drain plug?

You make it so simple. Can't believe it was so straightforward. Would love to have that here in the UK. Lovely

Long live the XJ 🎉😊

What plug wires did you use?

Great job 👏🏽