Видео

Do I need the license to get the driver to install?

When I installed mach3 i didn't get the install driver popup. Can you tell me why?

Miért nincs felirat a videóhoz? Nem mindenki tud angolul.

Thank You.......A Big Thanks

Thank you for this really useful video. You saved my life with the special driver advice and walk-through.

Hi. The arrows don’t move the axis at all. But the software turns on or of the spindle. What can I do?

Can use mach3 demo for test the machine

You're the man! I spent many hours going through internet info on trying to get a CNC zone 3040 router up and running. One of the biggest things I found was all the ways to connect it to the PC. Some say adapter X works and others say they don't or Win10 will work but nope. So what I found was just go find an older computer with XP 32 bit (not XP Pro 64bit). Shut off firewall, screen savers and just about anything else that will try to run. Use Mach3 and FOLLOW YOUR VIDEO! Setting up the pin numbers is what really got things going. Mine turned out to be X pin 1-2 Y pin 3-4 and Z 4-5. Which I swapped x and y because like a milling machine the x has more travel. The only thing to add is the calibration page. I think there are many people struggling to get these routers running. Sincerely a retired machinist with a new toy!

please send me name and reference of this controller (for threading with mach3 and support encoder)

Hi bro

I have a 3020 and everything runs fine, except any file I load cuts a tiny little version.I tried the roadrunner and it came out less than 1/2" in size. I had a mach3 user friend convert a logo for me at about 5" square, but when I loaded it in my mach3, it cut at about 1/2"in size. No idea how to fix it. Our systems are nearly identical settings.

Hi, after run the file Other Drive, i come into crash and blue screen!! How can I get to the old config? Please assist.

Great tutorial top man, just hope it’s as easy as it looks 🤔

Hi there, I have Connected everything like it should installed Mach3 and put on the CNC openend the Mach3 software it says driver loaded but nothing works or responds. I did set the config as it should (double checked), still nothing......... No drivers cd or Manual was given, took a lot of searching the internet too find anything like plugins but non worked for me. Can someoone please help me i really want too enjoy my CNCEST PRT-E1500W 6040 CNC. ( USB )

Very nice but it doesn't tell you how to get Mach3 to 'see' the motion controller

Need some walk through advice to get my machine running!! Who can i call im sure it is much. Hopefully!!

Compliment from Palermo ( Francesco 67 old yars :-)))

you say www.artofcnc.ca but when I load it it always goes to newfangled solutions page....please send help.....aging rapidly

Hello Sir, nice Vids :) Could you send me a Link for your second LTP Card? This would be nice, thank you :)

I am having issues with mach 3 and jcut cnc. Mach 3 will not jog my axis for some reason. Also I can start the spindle under midi by typing in m03 s24000. But when I go to run the program it stops the spindle and it doesn't move at all. Just needed some help with the settings as I think that is what the problem is. Thank you

I just installed Mach3 demo on my cnc Router, I’m not sure what values to enter under the motor outputs section for the step pin and dir pin #

please share sofwave and document or video setup sofwave and driver main board (mode tangential cutter, knife) for mail (tu0985332954@gmail.com) thank you very much.

I need your help to let me know the wiring schematic?pleaseeeeee

may I know the proper controller to produce the same machine,please?

It looks like you are using Mach3 G76 macro can you share your gcode your thread looks very good I am struggling with mine and there are few examples online

Great job explaining Mach! Thanks

What if you can not find the DriverTest.exe program?

NÃO ESTOU CONSEGUINDO FAZER O TANGENCIAL E BAIXAR O EIXO Z NA HORA DE MUDAR PARA OUTRO DESENHO

BOM DIA PODERIA ME PASSAR A CONFIGURAÇÃO QUE VOCÊ FEZ NO MACH3 POR FAVOR

thanks man!

I was under the impression that I would be able to get my steppers to run before I actually commit to buy a licence but am not having much luck. I just need to know if the lack of a licence means that I cannot actually get the wizard program to run in anything other than simulation mode.

What kind of CAM program is used for these cutters? is it artcam?

I need HELP from you. I buy a cnc machine with Mach3 software, and I have a little problem. When I load a G-code file (make in ArtCam) the software doesn't see the whole graphics. I make 3 stars and he see only one. I make my name and he see only first letter. Can you help me ??? Thank you. My email is: antonescu.bogdan35@yahoo.com (please answer me there)

ruclips.net/video/7cBiPLCKPbE/видео.html

Hi there, great video. I was wondering you could send me the optimization file please. Thank you very much.

You are the "Master" when it comes to Mach3, I will be back to watch all

if I have done everything that u have done and the motors lock up and r power up but no movement can u think of anything that I have done wrong thank u for the help dewayne

please what soft used for generated g code and desing?

What kind of CAM program is used for these cutters?

gracias!

Just for anyone who is looking, the current versions of mach3 have completely broken tangential control (as the video shows) even though they will still advertise it as being part of the software. You may or may not be able to fix this by rolling back to an older version of the software, but you won't know until you try, and may have to redo some of your program setup to get the older versions to work at all (and the license cost is the same whether you're able to use the latest version, or something from right when the software was first usable). If you contact mach3 about this they will refer you to this video and a pdf that tells you to write all of your tangential commands by hand and turn the option off in their software.

What version of mach3 are you running? Some versions including the current doesn't lift before prep and I see yours does.

Hi, what servos and controllers did you hook up to the Galil board? Was it a difficult process getting the Galil board to communicate with the servo motor drivers? I'm working on putting a parts list together for a cnc mill and am looking at options?! Thanks, Ron.

nice one kenny! i knew you would get this finished one day. benny.