Видео

nice mower. trying to decide between this mower (2023 model) or the 2023 John Deere Z325E with Briggs & Stratton Thoughts?

I have the deluxe what are you running for air pressure for saw

These are incredibly good built machines. I cut with the 54 inch variant. They’re definitely more expensive, but sometimes you do get what you pay for. Necessity if you have a larger yard.

We run he Red Runner Deluxe. 3 years in. It's not without faults but it's been a decent machine

I have the outlander 1000 6x6 and absolutely love it. Sometimes I wish I would have gotten one of these, but in a world of sxs I wanted something different. I am envious of the electric dumping bed, though lol. Great vid.

What a waste of 11 minutes. I wanted to see how these machines work and you never ran a log through it.

What’s the max width of this model? Thx

Is the kawasaki engine better than the kholer

Since this part broke once I would order another for a spare so when it breaks again you can fix in an hour instead of weeks later. Reduce your downtime! Also, it looks like some of those hoses at the back rub sharp edges which eventually will cut your hoses or wires. Use pool noodles or tape around the hoses or wires to protect them. Obviously it’s built as cheap as possible but a little maintenance and slight improvements looks like it will go a long way.

Thanks for the review. I know Pembroke area. My dad cut a lot of lumber with his large modular sawmill in that area in the 80s. I e worked on a few bridges in that area as well. Nice machine.

I believe those Kohlers have a winter setting, you turn the air intake towards the muffler

Mine has 320 hrs. Bought it in kinda rough shape but no complaints so far. Does more than what it seems like it could.

This is the kind of review i like to watch, actual real world use age of these 6x6's, I would love to see more videos of you using your canam if possible. Hopefully this summer i can get my hands on my own. Until then its save and watch videos. You must have a easy face cord plus in the bed.

Any thoughts on ground speed in forward or reverse? I have a 2017 that I bought used with 3200 hours. Seems extremely slow in high gear, in reverse. Pretty much all gears. Takes forever to plow my driveway. Usually running it WOT because I'm impatient.

I have a 2023 Limited 6x6 and it still has the old style front visco lok dif. The red 2024 units have the new smart lok dif. I love my 6x6 with heat/ac and closed cab and 30" tires. Great video!

Where did you find out how to adjust the blade back. Mine is the Deluxe but the chain has stopped and the splitter also. No close dealers. I’m stuck with anew machine that does not work.

Wow most interesting. You are patient. I have the deluxe with less hours than you - now the cylinder pushing the wood won’t come out and the saw no longer works - all suddenly while I was working. Very annoying - I don’t know how to fix that. Dealer 2 hrs away suggests I bring the Red Runner to him.

Thanks for the great video. I've watched it several times. I have a 2024 on order and can't wait to start adding accessories to it.

I wish i could purchase another one. Ive had mine for 4 years now. I use it at my camp. I usually arrive on Thursday leave Sunday afternoon. And thats every weekend. Its starts when i get there and does not shut off until i leave on Sunday. Hot refuel 9 pm and uaually between 9am 10am. Oil change is done on Sunday when i leave. Wish i had an hour meter on this thing. Also wish they never would have stopped selling this. Mine just started acting up. I am so bummed out right now lol. I totally give it a 10 out of 10. It owes me nothing. Thanks for the video

The one I have seem to work good..only problem...

Dave, have you noticed that it has trouble sucking up leaves? Curious as I just picked up the new model for 23 and first time out seemed like it was shooting more leaves out of the deck than was sucking up. Kinda frustrating. Lmk what your experience has been. Thanks

AUDIO SUCKS!

have you had to set the tracking yet? if so any chance you made a video of it, im having a hard time getting mine lined up properly

Do you know how much fuel you use on average, per cord?

Does the rubber deck latch in the up right position???

Very good thanks.

Does anyone know it this is quick hitch compatible???

Super video. My generator stopped. You solved it with the spark arrestor. Saved me 1000 dollars to buy another as princess doesn't sell it. My country place runs on generator to keep my basement sump from overflowing. Thanks

would you be able to send me your dealer info, Mine here in manitoba does not get back to me and i am having issue with the bar not having enough hydraulic pressure to cut the wood

Love the Safety trousers and work boots.

The diesel tractor is the real motivation here! A must have for any logging event!

Take it right to the local welding shop put that receiver on now you won’t regret it

I like my lights I can mow my neighbors yard in the dark with them

I bought one. It's put outside. In uilt wooden box with large port hole for exhaust and also drilled many breather holes . To prevent exhaust fumes bogging out unit yet it Boggs out/ shuts down, off within 20 minutes any recommendations . Or should I chain it to bumper. Drag, crunch the piece of crap? Thanks m8😊

Actually the more you talk about this unit the more obvious its badly designed and cheaply made..so many problems you pointed out on all your videos combined

Thanks for Video , There not many detail video on these sawmill

Maaco is having a special this week on paintjobs only for Norwood Log Hogs for $9.99 plus there's a 25% off coupon you can use with it. Just a heads up

Never seen a bandmill w/ the rollers on the bunks, might be a bit damage prone when loading heavy logs but I can see some advantages for material handling the boards/off cuts. Regards.

The problem when I re sharpen is i don't do the set. Set is huge. So my re sharpened blades like to dive.

Usually for me its a knocked out set from a nail.

Not many video's of this mill in action out there. Nice to see it. Seems like one of the best low cost mill options.

Hey Dave. Beautiful Nov 22 day today and I was out using my standard and the same thing with the ram on the saw. Mine bent all to hell and I’m very disappointed. The cover needs to be beefed up a ton to withstand the constant pressure. Did the little braces in the corners hold up? Does it need more and thicker bracing? I’m thinking throughout that cover. I’ve called and left a message with Darrell. I’m hoping he will get back to me really soon. I’m wanting to take full advantage of this weather.

Has the spindles got sealed bearing which you can’t get grease in to them ,this issue has bean talked about on Utube a lot

Would you still recommend this unit? I am thinking about pulling the trigger on this one but wondering if I should be looking at other units that cost a bit more (which I would prefer not to do).

Very informative review. Any chance to share those part numbers to save a little frustration if others have similar issues?

Interesting cause to the parts failure. Bigger processors like a Japa goes 4-5 cords or so on one chain sharpening. Also don't forget to adjust the raker depth, same as you'd do on a chainsaw. (Am sure you know this, just saying for other people new to firewood and stuff)

Messick's did a video where they hinted at telling a customer that the parts they were looking for would be difficult to find. Was a Chinese mower named "Koboto". Am looking at other Kubota equipment, just not in the market for a mower. Quality equipment in one line usually means quality equipment in another. Hope you get back to making videos as the firewood processor is what I'm really interested in.

Looking good!

What does the 48" Kabota cost ????

can you do anything to increase the size of the video itself? It's too small to see.