Видео

On the door locks it's a little bit harder to see as it's not physically engraved It's usually laser engraved. It should be on the lock itself sometimes you just can't see it and then your best option will be to remove the ignition switch It's more annoying but the code should be stamped much better on that.

@@Silverkeylocksmith what do you mean by which model? Do you mean the car or the device? If you mean the car it's irrelevant as what's important is the chip for the vehicle.

You can understand this is a review video, but as this is not the first reply that people want to see how to properly use it I will probably upload a new video about how to use it properly in the next couple of days

@@HotTvify they're not all accurate so try to go through all the ID46 chips until you hit the correct one in my case I don't use chip generation for those vehicles I just use the original B111

@@abiesnaar2772 2010 is a split year earlier models got the D chip and later models got the G chip so it's best to check with the dealer using the VIN number what chip it is and if it's a D chip then you can do it but if it's a G chip then you can't.

@@stasolocksmith Thanx

@@stasolocksmith I think the keyreader gave me 4D by the coil

No it does not

Simply because I do not have the star connector.

@stasolocksmith it was just a question...I'm a locksmith from Brandon MB

It should be able to cut any type of key, I myself never used the two headed one. But it shouldn't be a problem.

You will have to look at the options and scroll through the chip generating menu.

My pleasure

As long as it works 😉

Got mine on AliExpress

Call a locksmith

@@stasolocksmith where is locksmith. I did call to the key maker they said we can make only key if you have already one key

​@@saraikicrew8207 my videos is to help locksmith do better job, you should find a locksmith that know what they are doing.

It's not RAV4 it's Toyota Camry

It's my pleasure

This will not work, as I have stated in the video it will work only for D chip. Your vehicle is a C chip so you need a programmer for that.

@@stanislavboluchevski9626 okay thanks

Well if you don't know how to set up a key on how to actually duplicate a key in a machine like this I don't think this video is for you. This video is a review on a quality of this machine not the video on how to operate it this machine is so simple that a child in a kindergarten can operated it.

I'm a locksmith and one of my clients bought this in a Jinfa brand, looks identical except power switch. So I got theirs tuned in but the motor is so weak I stopped it using the deburring wheel on a KW1. The knob to turn to cut the key is ridiculous, you have to put the keys in then crank all the way opposite direction because of shape of the cutter only works 1 direction of travel.

@@600miles there are many look-alikes of those machines and many different companies put their brand on those machine, The specific one that I purchased works very well and I'm using it till this day, I own this machine for more than 5 years now and it cuts on the same cutting wheel that I have purchased it from day one, I made thousands on thousands of keys on the original cutting wheel. The only thing that was replaced a couple of months ago was the deboring brush.

Yes with the same cutter, replace couple of months ago the brush.

This tool is only for all keys lost situations. You can do a master key but the old key must be forfeited.

You'll have to check the system, I have seen it work on some and failed on other.

@@stasolocksmith what system? how do I check?

@@Peter-hw1yx the model, you need to know the part number for the key not just the fccid.

@@stasolocksmith I see... After I do that, what do I do with that information? im New to using Autel im608 pro 2. Maybe that could be why its not clicking. Sorry and thanks for the responses.

@@Peter-hw1yx just insert the Vin and select the vehicle and program it, IM608 is very simple to use it will explain all the steps. With time you will learn what you can do or not.

Thanks bro

No I said in the video the machine was purchased on aliexpress

Yes brother

Thank man

My pleasure brother 🙏

No my friend, I'm Israeli.

No as it is not D chip

It's my main machine for Automotive Key cutting and I cut with it hundreds of keys. For single sided keys I use HPC Blizz 1200

@@stasolocksmith Why wouldn't you use the SEC-E9 for single sided? Thanks for responding btw.

I do not have the clamp for the single sided keys, I use SEC-E9 only for Automotive dimple keys and barrel keys. I have a machine from HPC that I do all the small keys like RV, Boat and single sided keys. That machine is manual but very precise I used it in the beginning when I just started the business and didn't do all Automotive keys. Today I use only SEC-E9, the day it will stop working I'll probably will replace it with the Xhorse one.

@@richardb8104- for me the I don’t usually originate house keys with this machine because it cuts them like a laser cut key. Very ugly. Duplicating residential keys it will cut them with the ridges. Also who wants to waste the cutter on house keys. It will decide double sided keys properly if the keys aren’t worn out. No different than any other machine. I’ve had mine for 4 years now. No issues

Quality is good I have duplicated hundreds of keys, easy to operate. You do get bad cuts from time to time but it also depends on the type of the key you duplicating from

I know apparently in canada we have all Hyundai and Kia with immobilizer from almost 2001 as in the us they do not have.

​@STASO Locksmith Services LTD. Hi do you have a phone number I can reach you I'm from Brandon

My pleasure 😊

Yes all keys must be present at the programming time

My original key not working..what to do?

You go to settings conect it to wifi and then update

That's bad, did you try to lubricate the ignition and insert a blank key multiple times. Sometimes you need to release the wafers.

@@stasolocksmith I actually did but nothing i

I lubricated it and inserted a blank key multiple times you think it chock be because it was aftermarket? I've done about 8 ford's that use the h75 key and never ran into anything like this

@@eddcolocho6321 chang the ignition and key it to the original key, only option in this situation

@@stasolocksmith how do I remove it with out the key?

@@williamrichardson206 you may need a few of em

@@williamrichardson206 you can make them with a b102 or a b106 blade

Thank you

When you have an old car that you can't read the waifers properly it will take way more time and the lishi doesn't give you all cuts, so you big on taking but you'll never be in and out in 10 minutes with a lishi.

@@stasolocksmith so true. I am experiencing this right now. picking the lock open is easy but reading is tricky with the Lishi lifters falling in between the numbers. Even with a fill on line app like lockcodes, you an end up cutting sevral test keys and still not getting it. Story of my life right now; my company is about to fire me because I cut so many of their test keys loool

This one doesn't have a glove box lock.

Many Hondas don't have a lock on the glove box!