Видео

Great winter projects!

O que fazer quando o motor za 50 custa a partir tenho de pedalar muito

I really like this video it helped me much ❤

thank you for this Alex. it saved me hoops of time today and was the first time i sparked on the bench off the bike. so simple

It's a trade off. People only think of maintaining their bike when they want to ride it. We only want to ride when it's nice out. 😅

Looks like you guys could use some help taking care of all those mopeds! Good to know business is thriving. It is spring after all.

Might be the worst music I have ever heard

Thanks Alex, shop looks great!

My 70t first gear is missing one tooth and I can’t find one in stock anywhere. Am I safe to run with one missing tooth? It happened removing the gear the wrong way.

Put a bar in the front, moped shop in the back!

bruv how do you not have million subs

What are your thoughts on Treats 2nd gear locking tools? I flipped 2nd and haven't had any issues, but just found out about this and MA has some threads of people saying you should absolutely use the tool... Did I f up? lmao

Thanks 👍

Promo SM 💯

Is there any modifications that need done if ne was to put a big bore kit on one of these motors

Hello,Alex,you are ready to purchase battery from us in March? Its with big discount

Precio de una camiseta con envío a yunquera malaga España

It is cold I'm just a state below you Ohio its the worst at constant changing! I feel ya buddy hope all stays well I'll try to do my part if I can!

I will always support you guys. It's pretty cool to have a place that houses folks with the most moped knowledge in the country right around the corner from home. Seriously, Alex and his team are national treasures. Patronize them, even if you don't need moped parts. Stop in just to say hi, buy a hoodie or a hat. Support local business.

Lots of stuff in stock! Awesome to see! Always love arrival days!

Thanks for getting my 1980 Concord Intruder going with a new coil litterally just got to it last night! Also bought a huge flywheel puller kit and got the points cleaned they were so bad! Also got my 1976 Sachs Hercules going I keep your sticker on my work bench! Old video when I got the Sachs going but shows both of them. ruclips.net/video/HgaexHnoKQM/видео.html

Great job keeping bikes on the road! Thanks for hooking up parts! Also any moped content is good. But I wanna see some hijinks videos! Keep it up!

We’ve got these e50 cases: $100 or 2 for $150 SHIPPED FULLY WATCH THE VIDEO for the condition of the motors and email or DM the FB page with any specific ones you want. Will send more photos of any you buy before shipping. 🤙

What would a fully built motor go for

I came here to try and learn about spark on my friends PUCH. You do pretty well on explanation..... until you get to 3;50 After spending a long time explaining how and where to ground a wire you then tell the colors of some other wires.... that you are not worried about. THEN as I wait to find out what wire gives spark you quickly say " I could use this wire directly " which of course we cant see the wire colors you are talking about. Who knows if you actually later on say the color of the important wire this video is about.... no one has time to watch more hoping that you will give the color later down the road. Now I,m not trying to be a dick.... just so you learn and make many great videos in the future. SO.... any guy that can check points and understands a wiring block does not need 30 seconds about how or where to ground a wire. Secondly... telling the colors of wires and then stating " But we arnt concerned with these today " Nope ! If is isnt important to the videos topic.... dont waste time on it. Thirdly... many guys dont have a big screen and can only go by your verbal identifications... You can zoom in but you need to to specifically say what size , shape , location , entry, exit , movement , shape etc. the thing is while showing it. ( pretend your viewer is blind ) Good advice , I swear. Good luck

Just picked up lime green 1978 puch Maxie! Your video was awesome! I lost spark after first run in 20 years and your right on the money! I need a new ignition coil! Thanks for the information!

I need some 2 shoe s

Do you still sell tomos mopeds? New?

Very helpful video. I managed to take off the first gear, clutch cover, and first clutch no problem. When it came to the second clutch it didn’t seem to want to move so I didn’t mess with it. Is it tied into the ignition side? I noticed you guys have everything removed from the other side in this video. Do you have to remove everything from the starter/electrical side in order to pull out the rest of the transmission?

Hello and thanks much for taking time and effort to put together such great series. I purchased Puch Magnum XK from an estate sale. It seems to be in a very good decades-unused condition. Since I am not tech-savvy, can you please point me in the right direction as to the basic maintenance steps I should perform to get moped running? E.g. which parts need to be oiled, cleaned/checked prior to filling up tank and trying to start it. Many thanks in advance. - Ed.

I just learned today you existed. 👍👍

DO NOT sit or stand on a moped while it is on the centerstand. The centerstand is designed to support the weight of the bike ONLY. I have seen so many bent stands and even frames cause by people sitting or standing on it while it was on the centerstand. The correct way to start a pedal moped is to either get on it and pedal it WHILE IT IS ON IT'S WHEELS, or, if you need to start it on the stand, stand on the left side of the moped, put the left pedal at about the 10:00 o'clock position, and firmly push down. DO NOT PUT YOUR WEIGHT ON THE CENTERSTAND.

This de-mystifies a nunber if things for me, thanks.

This is exactly what I did when reassembling my za. I get full tension on my lever and just enough friction to start it. Pain in the ass. Do I need to take off the clutch cover to readjust it or can I do it from outside the case?

Sorry to hear. I live in a basement and it’s my biggest fear.

Did you ever do the checking for spark video

Don’t remind no mine don’t 😝

Hi I have 4 of these, I do feature them on my channel amongst other things, please take a look. I’ve just subbed you, you do some good stuff 🙂👍

My old Vespa took two steps and releasing the clutch and it would start everytime.

Great video guys. I'm a 25 year auto tech, and what I've learned is that I still have alot to learn. I've had my 78 maxi in custom resto form for 14 years. It was my daily for 3. The gearing and clutch engagement was never right for intersections or pulling steep hills. I finally got in there to see what was what and found first gear clutch material disintegrated. Also found puck material crumbled. Not to mention second gear clutch spring was sprung! I ordered the first gear treat clutch and malossi springs, and a used second gear clutch. Haven't received shipment yet, and I'm glad cause y'all got some great pointers on this one! Thanks! I'm down here in Maryland. I hope to check out your shop one day!

I drove by where your shop would be about a month ago and there was nothing there. The building was vacant. Did I miss it? Did you move out? What’s up?

Do you need a license to drive these?

My house flooded last year from the dam failures in Sanford. If you need help, I could give a hand.

Oh man. Donated; best of luck with the cleanup, and if you need hands, just shout.

If yall need a hand cleaning that up let me know! I could donate some time for beers and the satisfaction of helping save some mopeds

Nice video, keep up the good job! I wish I had this kind of videos back then when I started with my za50. Regarding the adjustment nut, the manual says: "Turn the adjustment nut, for the short starting cable to the right until rear wheel is dragging when turning by hand. Mark this position on the adjustment nut and sleeve. From the applied mark turn adjustment nut six full turns to the left - with new starting clutch or seven turns to the left with a run-in starting clutch This adjustment assures the needed clearance of .008 - .012 in. (0.20-0.30 mm) between the starting clutch and the engaging plate." Hope it helps. Btw, dont you have to use a tensor for that cable? There is one ribbon(?) in the right side of the frame where you can place a tensor to adjust the tension on the cover.

Do you guys sell motors or parts? I have one with a cracked case that I want to repair.

Great video, thank you. Greetings from Denmark.

What if I lost the key

I believe that if any body is willing to agree to RUclips's terms is because is good for public service. Z