- Видео 49
- Просмотров 109 918
Desert Style
США
Добавлен 5 июн 2018
Email me at :
Projectduran.4969@gmail.com
This is my 2016 Dodge Dart Sxt. Over the year have been finding project after project to work on. This channel was made not only to help others out there with a Dodge Dart but myself included. So far I have removed the front bumper to get that stock red off. Replaced the headlight assembly from clear and silver to all black. Bolted in a rear spoiler. Tinted the windows. painted over the interior black. Replaced the stock analog radio to a touch screen dvd receiver, switched out the stock speakers to some nice kickers, Looking to do an amp later on. Bolted on some mud flaps from rally armor. The most recent was removing the stock exhaust to a flowmaster dbx catback.
Better late the never, I decided to start making videos of the projects of what I have done.
I would like to encourage everyone to comment on your projects and builds. Also feel free to comment on my projects. Every little bit of help is appreciated.
Enjoy the channel.
Projectduran.4969@gmail.com
This is my 2016 Dodge Dart Sxt. Over the year have been finding project after project to work on. This channel was made not only to help others out there with a Dodge Dart but myself included. So far I have removed the front bumper to get that stock red off. Replaced the headlight assembly from clear and silver to all black. Bolted in a rear spoiler. Tinted the windows. painted over the interior black. Replaced the stock analog radio to a touch screen dvd receiver, switched out the stock speakers to some nice kickers, Looking to do an amp later on. Bolted on some mud flaps from rally armor. The most recent was removing the stock exhaust to a flowmaster dbx catback.
Better late the never, I decided to start making videos of the projects of what I have done.
I would like to encourage everyone to comment on your projects and builds. Also feel free to comment on my projects. Every little bit of help is appreciated.
Enjoy the channel.
MOTOFAB 2.5 INCH LEVELING
Im installing a 2.5 leveling kit on my 2020 ram 1500 laramie 4x4.
passenger side took the longest. because during the process of removing the strut i popped the cv axel out of place and had to start over. to get it back in , i removed the strut lifted the lower control arm till the cv was parallel then pushed it back in to redo the process. other then that great fun.
before tightening down the sway bar put the weight of the truck on it.
passenger side took the longest. because during the process of removing the strut i popped the cv axel out of place and had to start over. to get it back in , i removed the strut lifted the lower control arm till the cv was parallel then pushed it back in to redo the process. other then that great fun.
before tightening down the sway bar put the weight of the truck on it.
Просмотров: 1 186
Видео
HARDWIRE DASH CAM
Просмотров 444 года назад
Today i hardwired my dash cam to my fuse box. When using the fuse taps. Be sure to find your load and draw side and wire it accordingly. On the fuse taps. The far left side of the tap is the load side your 12v side. The side (right) nearest the running wire is your draw side. On the fuse box find the load side and be sure it is connected to match your fuse tap. The fuse on the lower side of the...
Cabin air filter change
Просмотров 694 года назад
2020 ram 1500 laramie. Cabin air filter change. Come to find out you have to squeeze kind hard on the sides of the glove box to get it out. Just be careful not to destroy the tabs holding it in. Enjoy
Running board install 2020 ram 1500 laramie crew cab
Просмотров 2664 года назад
Picked up some great nerf boards and hers how to install. Again the only challenge was the brackets for the rear. And where to drill my 1/4 inch hole in the pinch weld. Other then that easy install and there very sturdy. At a great price.
VINYL WRAPPED ROOF AND PAINTED HEADLINER
Просмотров 2234 года назад
Finally done with everything. Since I wanted to vinyl wrap my roof, I decided to drop and paint my headliner. It would be helpful to first remove the back seats before you pull the headliner out of the car. The a pillars please refer to my other video. Wrapping the roof was a challenge till I figured out that you stretch and press little area by little area . Definitely a two person job.
HEAD LINER REMOVALE FOR 2016 DODGE DART
Просмотров 1 тыс.4 года назад
Removing the headliner I removed all the pillars , dome lamp. Map light. And "ohh shit " handles. After wards i had to pull it down from the roof. Its held on by a glue . Some foam got detach, when i put the headliner back in I'm going to replace the glue with gorilla glue. I also removed my back seats. Bit I'll post that on another video. Questions and comments are more then welcome ..... enjoy
"A" PILLAR REMOVAL 2016 DODGE DART
Просмотров 1,4 тыс.4 года назад
I'm removing and painting my hoodliner so during the process I have to remove the pillars. The most difficult is this a pillar. Its held by 6 clips on the inside. To remove it. Press the pillar toward the inside of the car. Both bottom amd top have clips. The black strip has a small tab that needs to be pressed twice while pulling upwards. Good luck and questions and comments are more then welcome
OIL CHANGE 2016 DODOGE DART
Просмотров 4574 года назад
This tigershark takes 0w 20 full synthetic 5 quarts. The oil plug is a . 13 mm the covers are a 7mm. Process is simple : jack the car up. Open your oil cap and pull the dip stick. Loosen the oil plug. Let drain a bit to relieve pressure or like me you will get oil everywhere. After drained pull the oil filter. With all old oil drained replace oil plug and filter. Fill with 5 liters of oil. Cap ...
AMBIENT TEMPURATURE SENSOR
Просмотров 764 года назад
I had used the continuity test to find the break in my circuit to the ambient temperature sensor. The computer threw a code u1 10e
HOW TO CONTINUITY TEST
Просмотров 314 года назад
Using a multimeter you can track wires and as I did find a break in a wore circuit. Set the meter to the symbol that looks like sound on functions do the same to get a beep when testing wires.
HOW TO TEST SENSOR
Просмотров 264 года назад
Testing this sensor set your multimeter to omega. If the numbers change then the sensor is detecting temp. A hair drier would work great to heat the sensor while its hooked up to the multimeter
CODE u110e. TEMPTERATURE SENSOR
Просмотров 12 тыс.4 года назад
Had a check engine light come on. Code was u110e . It is the ambient temperature sensor. Easy fix. Its located in front of the radiator. No need to take the number off. Just the cover above the radiator. Its held by 1 clip and the harness. The part costs 25 dollars. And it took about 30 mins. Beats paying 100 something. And after reconnecting the battery and starting my car the code went away. ...
Reverse lights on white head unit was on
Просмотров 1695 лет назад
Reverse lights on white head unit was on
Back up cam wiring and install on 2016 dodge dart
Просмотров 7 тыс.5 лет назад
Back up cam wiring and install on 2016 dodge dart
Could you please send me a diagram or a photo of how to connect the cables as you did to install that stereo?
Thanks, it works.
I changed the sensor but the code u110e is still on
In the very beginning of the video you point out two 7mm bolts. It appears you've already removed the side cover. How do I remove the side cover? I don't want to force/break it.
What colors where the ones you tapped into? I am not able to see the colors
Awesome 👏🏾 hey u still have your car
Does your dash light up red at night? Around all of the units
Does that unit allow for the heat controls, etc. like the stock unit?
thank you!
👍
Cant see shit! What the hell did you just do?
Hello, could you help me with my dart, it's a 2013 sxt, the question is that the courtesy lights never go off and I had to remove them
Sounds amazing and great job. I also have a 2016 se 2.0 dart. So my question is this... did you do the I stall yourself and did you have to cut out the oem that was on it... and what was the time frame on completing it. That sounds amazing and that what I would like to do...
Horrible filming job
old comment but did you have to grind down your stock bezel or did it fit in on its own?
Which radio is this ?
Time for a tuner now lol. I hated my dart always had a bad pedal response. A tuner would fix your problem as well as adding a few ponies that you never knew you had
So what can you do to avoid knocking out the CV joint just don’t press down on the rotors ?
I stepped on mine to make room to remove the strut 🤣🤣🤣🤣
Ya the driver side i just used the cro bar and avoided pressure on the rotor
@@desertstyle8460 man I think I knocked out my CV joint to idk I about to put my wheel on and I don’t have to lift them to put them on even to I had to lift them to get them off I actually have to put the jack higher than the jack stands I had put under us that bad idk by but I only finished one side today and my lower control arm on my driver side (side I finished today) is 1 inch lower that the lower control arm on the passenger side idk I want to get this check out to see if am good 💀 hopefully I didn’t mess my truck up
You should be good. Not to sure what you mean id have to see but it ahould be even on bith sodes. And did you push the cv back in.
@@desertstyle8460 I’ve seen some videos and I don’t think I knocked it out but my lower control arm on my driver side the side I did today seemed off and i measured how far it was from the ground and it was 8 in and I went to go measure my passenger side lower control arm and it was 9 idk how my driver side got lower And not sure if it’s bad
I popped my cv and I could not get it into place what the heck is the trick I just bought one lol. You replaced the uppers too right? I didn't yet but I'm thinking i should of
Popping it back in should be no problem make sure the splines line up and itll take a little pressure. Also there should be a lock ring at the end that needs to click in. And no i didnt swap uppers. Since its only 2.5 inches i left the stock in.
@@desertstyle8460 not the spline the actual joint of the cv axle"cv joint" came undone inside boot if that makes sense. Thanks for the vids !
Any pics .
Thanks man, me and my dad yelling for half an hour like the funny mejicanos we are and managed thru with your help!!!
Hahahahahaha thats great man thank you for the feedback. Hope.you enjoy
Is it necessary to take that last piece you gotta reach in the bumper or can I leave just that piece on cuz I don’t wanna take my bumper off and the latch hole is too small for me to reach in there
Better to do it . The bumper isnt a big job
Whitch models?
Before I get in there, is it the same for a Dodge Dart SXT 2015 2.4L??? Just wanna make sure to be safe.
Any problems with this kit?
None at all been running it since and not a problem. Also able to run 33s under them .
And the rivets on each side?
U should make a video on how to do the reverse cam trying to figure out what cable it is ....
Would love to but i got rid of my dart when i got my truck
Be happy to help tho
I have a 2016 Dodge Dart aero single pipe and it’s a 1.4 engine. Any tips on making it sound better/louder?
You can go dual exhaust with bigger pipes. Check out summit on line
@@desertstyle8460 thanks man I appreciate it
Anytime bro
Need a couple of drive byes
Would but i sold the car for my truck
What radio did u install
Its been a while i believe its the avx 2300. I got it off crutchfield
@@desertstyle8460 did u have to edit the dash in any way or just straight plug and play
@@Walmrt_SeC1ty23 ua theres a bracket spot welded on the frame that holds the analog stock radio there. In order to instal the aftermarket one that bracket has to be broken off. And can not be replaced
out of all the vids i've watched you are the only one so far to show how to get that last piece of the intake out.
Hahaha thanks brother. Im looking to make videos for my ram 1500 next.
@@desertstyle8460 I just put the Takeda intake on my 2.4L dart. if i hadn't dropped a nut down the old intake i would have left most of it in the fender. it was just that one part that i couldn't get out
@@panzerducky glad you got it worked out dude
@@desertstyle8460 and it sounds really nice when you put the foot down
Looks great!!!
Toyota Corolla 1991
Put bvb in hole a bar or tool
can you add a link in the discription on where you got em
Summintracing.com
cop magnet here in ca. not for me.
Im in so cal. Got pulled over right after i did it but it wasnt for my exhaust . It was because i had a license plate cover. Even clear i guess there not allowed
how did you get the headliner out of the vehicle?
I laid the front seats all the way back after i removed the back seat cushion. Be careful cause there is a wire harness under it. Then removed the visors and handles and maneuvered it out of the back door. It will have to bend a slight bit. And the headliner is glued to some hard foam blocks. So a little force is needed.
Be sure to remove the map and dome light harnesses as well. And......... the rear of the headliner toward the back window has clips if i remember correct. Good luck bro
Thank you for taking the time to show us how you got yours to work. I've been tapping wires all over the trunk to try and get all the noise out of the camera and make the switched wire work when in reverse. Hopefully, I can try and make some corrections during lunch tomorrow and finally be done with my build for a while. DMH-1500nex, Rockford 4-way 6x9s @ 75w RMS, 2 Rockford p2 12s @ 400w RMS. It's been an adventure learning how to do it all but I'm ready to just enjoy it.
No problem brother
What head unit did the car come with? Was it the shitty 8.4 touch screen?
Not even. It was the dial analog one
How long did it take you ?
Its alot of work trust me. Be sure you have a couple days back to back free to allow the paint to dry if you are doing so
@@desertstyle8460 well ima just take the headliner off to wrap it in suede but how long did taking it off take you ?
Not long. I had to remove the back seats and work around the front seats. But didnt have to remove them. I will say tho the headliner doesnt have a hard back to remove the material that is already on there. So mabye you may have to erap it over the existing material but not sure if thats gonna interfer with the dome lighr map light and the other accesories
Email me and ill give you my number
Projectduran.4969@gmail.com
Where did you get your system from ? I have a 2014 dodge dart .
I picked it up at crutchfield. Not sure the name its been so long ago. I will be happy to email the details. Projectduran.4969@gmail.com along with any other mods i haven't posted
What did you use to apply the vinyl? Saw your review on Amazon, any tips?
Hey man love the video! How long did the install take overall? Any specific parts I would need? I just got my intake in the mail yesterday!
What’s up?! Enjoying the uploads! Have you considered using smzeus . c o m to promote your videos!?
No i havent . And thank you
You got ur truck congratulations brother Next year for me
Awe thank you sis. Ya finally got it. Cant wait to see yours. Love you
Is your dodge a 2.0L ?
Yes
would this product fit on a 2013 2.0l dodge dart?
I think its from 2014 up. Not to sure. But I know its good for the 2.0l tigershark engine
@@desertstyle8460 Okay, thanks a lot!
Your welcome bro
@@thiccboi8225 it works for all models, 2013-16
What antenna adapter did you use?
The head unit came with a new antenna adapter. I had to by the harness separate. I chose to go through crutchfield for it. They even solder it for you at a small fee. I also bought the adapters for the steering wheel controls to work with it. Again from crutchfield, they will suggest a sorta kit to you when you purchase a head unit from them .
Really helpful doing the same to mine thank you
No problem bro
You have a link to the Kit? Sounds good bro
Ya bro check out modernperformance.com
Thanks dude. Let me know what you go for
Just got an sxt bro and I was wondering if you got the 2.5 inch or the 3 inch tips ?
The tips I believe on mine are 3 but the pipe is 2