Видео

Do u recommend i have mk4 golf tdi seriously drain prob ?

So you can print something without a program from a computer?

very helpful!!! Worked

I’m having a similar problem after a power outage. I’m really hesitant to try the reset for fear of losing everything I’ve set up.

hmm but what's the power draw with it ON, so if you forget to disconnect the battery, the electromagnet will drain the battery?

thanks for showing what's inside :)

THANK YOU!

Apreciate your video. Thanks.

Install WD SmartWare™ from the system tray icon you can shutdown the device

Me personally, I hate Noctua fans, because they are very quit yet they DO NOT produce enough air to cool the hot end effectively. for me making quit fan by reducing the amount of airflow is not impressive!

Why are you using a rake to SPP. That lock is easily opened with a standard pick. Am one handed and have it opened in about a minute.

But how to repair display digit's not readable properly

Good job but some things on your way your metal should be cleaned before and ever mm your material has you use 15 A or even more with cheap welding machines

You dont know nothing you just talk and changing connections you are garbage

great video🎉

is that a matter of weight balance?

Thanks, that was for me, as I am a beginner, already top info, just watching ..

Will this cause problems in the long term?

El modelo mejor es el noctua 40mm x20mm 12v

To fix a multimeter you need a multimeter 😅

You can find the link to the model in my channel bio :)

For all the keyboard doctors out there. I have had this machine branded different over 10 years. It is very sensitive to amps and stick position because it doesnt have any assisting properties like modern dc inverters. Once you learn to weld this you will master rest of the welders. Its like riding a bike without balance wheels first time.

Many devices only have a single 12V power supply and generate the lower voltages for the electronics internally using a voltage regulator. When the motors generate current, it flows through the motor driver board back into the 12V power supply. The voltage regulator can draw power from this and the display becomes active. Good engineers are aware of this phenomenon and have protected their circuits against it. But to be on the safe side, you should only move the motors slowly so as not to generate too much energy.

Same with my Ender LOL

Thank you so much! I am rescuing my files right now with your help. My WD MyCloud 3TB died today. Red light despite everything and I was hearing a clicking and hissing sound from inside. At first I thought that the drive had failed and the noise was from the drive's head. Imagine my surprise when I took it apart and found out that the sound was coming from the PCB! I couldn't pinpoint it to a particular element on the PCB, but it was producing the sound I was hearing nevertheless! It was the weirdest thing! Anyway thank you again.

Option 0: plug your ethernet cable into your device without any reset. If you do a soft reset, plug it again. In my case for some reason MyCloud didn't want to connect to my network, the network led on the back didn't blink. After plugging it into my Mac mini it worked.

is your car desiel?

Thanks man your videos helped me regain my data and safely shutting down my cloud in 2024

Amazing, thank you .

You are so right about RAID not being a good data backup. All it does is keep you running if you have a failed drive. Once I came to that realization I changed my volume to JBOD to maximize space and bought a QNAP DAS that I keep in another location connected to a computer synced using QSync. With no action required by me, every time I add a file to either it automatically clones to the other unit 300km away. I hope someone finds that useful.

The video is so good.. My WD4100EX enclosure is not booting up. The 4, Raid 10 hard disks are ok. . How can I recover Nas drive with Raid configured? Also Can I change the WD4100 encloure to another brand (synology) or the existing model WD 4100 EX must be used ?Thanks

it works thank you :)

This comparison is very bad, the air flow on the other side is limited, which is why they make so much noise. Noctua has a more productive fan model with a diameter of 40 mm. Noctua fans are very quiet and productive. Some people even install them on servers

You are a Star Man - I was fighting with that issue for a few years and you gave me the light. Cheers!!!

Nice, thanks, man!

I recently did a swap to noctua and couldn't hear the notuca fans which was really impressive, until I did a air flow comparision. The noctua's were not pushing anywhere near the same capacity. I ended up putting back the factory fans back in.

Weird

Provide me the link of product

The elephant in the room of course is WHY? Nothing to do with WD wanting access (all of the time) to their customer's data I don't suppose. This is not a mistake, it's cynical design. I had exactly the same problem with a so-called 'smart' TV I bought a few years ago: no 'off' switch. As with the NAS I translate 'smart' and the lack of hardware off switches as attempts in all cases to harvest data by all means possible (access to hard drives, microphones, cameras in all devices whether mobile, desktop or home entertainment. There is literally no other reason - nothing to do with energy conservation and convenience (in fact the reverse). In all cases I DEMAND the ability to turn off all devices - in the case of the TV I fitted a conveniently located switched mains socket. The irony is that in many ways I don't mind data collection; I just wish that industry would be more honest about it and not try to hide the fact that this is what they want to do all the time. Finally, 'hibernate' does not give me any confidence at all that the devices actually turns off stone-cold dead - I will do it but then will pull the power and LAN cables. If they mean 'shutdown' then it should say that in clear words: 'TURN OFF'!! Thanks for your video by the way - these are not complaints directed at you they are complaints aimed at designers/manufacturers!

will this work for a starter kill switch ?

I put one on, but it does not completely cut the power off, still drains the battery what a pos..

Haha I completely understand the music :D I would feel just like that. I have been choosing my welder for a few past weeks, I don't need to weld anything at all, I just WANT so bad!

I have the same problems accessing my TS-451+. It won't even access my Admin/Admin username and password, despite doing a 3-second reset with the button in the back. I even tried the combo suggested by QNAP customer service: using Admin in combination with my MAC address (no spaces or colons), and the darned thing still refuses to give me access. Very frustrating. I also did the hard, 10-second reset and it made no difference. If you know of any other work-around, let me know. I'm about ready to "drop kick" my QNAP NAS into the river! No NAS should be able to totally lock out the user like this. I did notice you added in pressing the Power button same time as you did a reset; that's not advised in the directions you showed, so why did you do that?

Wow, that worked for me on Win10 + FireFox, thanks. I found it easier just to delete the contents between the quotes i.e. style=""

I weld on particle board but I prop up what Im welding and yes the table gets burned but not much beyond the surface so it works fine just be careful

This is nice but.... Laser where?😈

Cool

Full Speed Build Video: ruclips.net/video/xb7XG9x6HQw/видео.html

I have a question for you: When editing this video, I struggled to cut down the whole 4 hours of raw material to 3 minutes and the end result seems a bit superficial. Would a longer version be interesting at all and if so, on this or a (non existent) second channel? Let me know in the comments what you think about it :)

why would you do that???